1. LO1 Know types of Network Systems and Protocols

2. Wan Technologies

3. Objectives By the end of this lesson, you will be able to describe and compare different Wan Technologies: – Packet Switching – Frame Relay – MPLS – ATM – ADSL

4. WAN Technologies WANs use different technologies to a LAN WAN technologies are used to connect geographically separate LANs or PCs The Internet is the world’s largest WAN Routers join the WAN links to the LANs

5. Packet Switching Most WANs utilize some type of packet switching technology X.25 communications protocol was one of the first implementations of packet switching WANs Packet switching breaks down large LAN messages into smaller frames before routing them onto the WAN

6. Packet Switching

7. Frame Relay X.25 has been largely replaced by Frame Relay Frame relay uses a variable-size unit (frame) switched over a permanent virtual circuit Why its NB

8. ATM Switching technology that organizes digital data into 53-byte cell unit before switching over ATM switches

9. MPLS Multiprotocol Label Switching Packet switched network where packets are routed on labels Faster way of transporting latency-sensitive applications like voice and video

10. ADSL Asymmetrical Digital Subscriber Line ADSL transmits digital information at a high bandwidth on existing phone lines to homes and businesses

11. SUMMARY Many Wan Technologies are based on packet switching technology ATM uses fixed cells Frame Relay uses variable length frames MPLS uses labels to improve switching performance ADSL commonly used for internet access