1. 6 Energy, Enzymes, and Metabolism

2. 6 Energy and Energy Conversions ATP: Transferring Energy in Cells Enzymes: Biological Catalysts Molecular Structure Determines Enzyme Function Metabolism and the Regulation of Enzymes

3. 6 Energy and Energy Conversions To physicists, energy represents the capacity to do work. To biochemists, energy represents the capacity for change. Cells must acquire energy from their environment. Cells cannot make energy; energy is neither created nor destroyed, but energy can be transformed. In life, energy transformations consist primarily of movement of molecules and changes in chemical bonds.

4. 6 Energy and Energy Conversions There are two main types of energy:  Potential energy is energy of state or position—it is stored energy.  Kinetic energy is the energy of movement. Kinetic energy does work that alters the state or motion of matter.

5. Figure 6.1 Energy Conversions and Work

6. 6 Energy and Energy Conversions Metabolism can be divided into two types of activities:  Anabolic reactions link simple molecules together to make complex ones. These are energy-storing reactions.  Catabolic reactions break down complex molecules into simpler ones. Some of these reactions provide the energy for anabolic reactions.

7. 6 Energy and Energy Conversions The first law of thermodynamics states that: During any conversion of forms of energy, the total initial energy will equal the total final energy. Energy is neither created nor destroyed. Although living cells are open systems (they exchange matter and energy with their surroundings), they still obey these laws.

8. Figure 6.2 (a) The Laws of Thermodynamics

9. 6 Energy and Energy Conversions Second law of thermodynamics: When energy is transformed, some becomes unavailable to do work. No physical process or chemical reaction is 100 per cent efficient, that is, not all the energy released can be used to do work.

10. Figure 6.2 (b) The Laws of Thermodynamics

11. 6 Energy and Energy Conversions In any system: total energy = usable energy + unusable energy Or: enthalpy (H) = free energy (G) + entropy (S) H = G + TS (T = absolute temperature) Entropy is a measure of the disorder of a system. Usable energy: G = H – TS

12. 6 Energy and Energy Conversions G, H, and S cannot be measured precisely. Change in each at a constant temperature can be measured precisely in calories or joules.  G =  H – T  S If  G is positive (+), free energy is required. This is the case for anabolic reactions. If  G is negative (–), free energy is released. This is the case for catabolic reactions.

13. 6 Energy and Energy Conversions If a chemical reaction increases entropy, its products are more disordered or random than its reactants are. An example is the hydrolysis of a protein to its amino acids. Free energy is released,  G is negative, and  S is positive (entropy increases). When proteins are made from amino acids, free energy is required, there are fewer products, and  S is negative.

14. 6 Energy and Energy Conversions The second law of thermodynamics also predicts that, as a result of energy conversions, disorder tends to increase. This tendency for disorder to increase gives a directionality to physical and chemical processes, explaining why some reactions proceed in one direction rather than another.

15. 6 Energy and Energy Conversions It may seem that highly complex organisms, such as the human body, are in apparent disagreement with the second law, but this is not the case. The metabolic processes that take place in living tissues produce far more disorder than the order present within the tissues. To maintain order, life requires a constant input of energy.

16. 6 Energy and Energy Conversions Anabolic reactions may make single products from many smaller units; such reactions consume energy. Catabolic reactions may reduce an organized substance (glucose) into smaller, more randomly distributed substances (CO 2 and H 2 O). Such reactions release energy. There is a direct relationship between the amount of energy released by a reaction (–  G), or the amount taken up (+  G), and the tendency of a reaction to run to completion without an input of energy.

17. 6 Energy and Energy Conversions A spontaneous reaction goes more than halfway to completion without input of energy, whereas a nonspontaneous reaction proceeds that far only with an input of energy. Spontaneous reactions are called exergonic and have negative  G values (they release energy). Nonspontaneous reactions are called endergonic and have positive  G values (they consume energy). If under certain conditions A  B is spontaneous (exergonic), then B  A must be nonspontaneous (endergonic).

18. Figure 6.3 Exergonic and Endergonic Reactions

19. 6 Energy and Energy Conversions In principle, all reactions are reversible (A  B). Adding more A speeds up the forward reaction, A  B; adding more B speeds up the reverse reaction, B  A. At the point of chemical equilibrium, the relative concentrations of A and B are such that forward and reverse reactions take place at the same rate. Although no further net change occurs at this point, reactions of individual molecules continue.

20. 6 Energy and Energy Conversions An example of equilibrium can be seen in the cellular conversion of glucose 1-phosphate to glucose 6-phosphate. At pH 7 and 25°C, the concentration of the product rises while the concentration of the reactant falls. Equilibrium is reached when the product-to- reactant ratio is 19:1. At this point the forward reaction has gone 95 percent to completion. The further a reaction goes toward completion in order to reach equilibrium, the greater the amount of free energy released.

21. Figure 6.4 Concentration at Equilibrium

22. 6 ATP: Transferring Energy in Cells All living cells use adenosine triphosphate (ATP) for capture, transfer, and storage of energy. Some of the free energy released by certain exergonic reactions is captured in ATP, which then can release free energy to drive endergonic reactions. ATP is not an unusual molecule and it has other uses as well; for example, it can be converted into a building block for DNA and RNA.

23. Figure 6.5 ATP (Part 1)

24. Figure 6.5 ATP (Part 2)

25. 6 ATP: Transferring Energy in Cells ATP can hydrolyze to yield ADP and an inorganic phosphate ion (P i ). ATP + H 2 O  ADP + P i + free energy The reaction is exergonic (  G = –12 kcal/mol). Free energy of the P–O bond is much higher than the H–O bond that forms after hydrolysis. Phosphates are negatively charged, so energy is required to get them near each other to bond (to add a phosphate to ADP).

26. 6 ATP: Transferring Energy in Cells The formation of ATP from ADP and P i, is endergonic and consumes as much free energy as is released by the breakdown of ATP: ADP + P i + free energy  ATP + H 2 O ATP shuttles energy from exergonic reactions to endergonic reactions. Each cell requires millions of molecules of ATP per second to drive its biochemical machinery. Each ATP molecule undergoes about 10,000 cycles of synthesis and hydrolysis every day.

27. Figure 6.6 The Energy-Coupling Cycle of ATP

28. Figure 6.7 Coupling ATP Hydrolysis to an Endergonic Reaction

29. 6 Enzymes: Biological Catalysts A catalyst is any substance that speeds up a chemical reaction without itself being used up. Living cells use biological catalysts to increase rates of chemical reactions. Most biological catalysts are proteins called enzymes. Certain RNA molecules called ribozymes are also catalysts.

30. 6 Enzymes: Biological Catalysts The direction of a reaction can be predicted if  G is known, but not the rate of the reaction. Some reactions are slow because there is an energy barrier between reactants and products. Exergonic reactions proceed only after the addition of a small amount of added energy, called the activation energy (E a ). In a chemical reaction, activation energy is the energy needed to put molecules into a transition state. Transition-state species have higher free energy than either reactants or products.

31. Figure 6.8 Activation Energy Initiates Reactions

32. 6 Enzymes: Biological Catalysts Exergonic reactions often are initiated by the addition of heat, which increases the average kinetic energy of the molecules. However, adding heat is not an appropriate way for biological systems to drive reactions. Enzymes solve this problem by lowering the energy barrier.

33. Figure 6.9 Over the Energy Barrier

34. 6 Enzymes: Biological Catalysts Enzymes bind specific reactant molecules called substrates. Substrates bind to a particular site on the enzyme surface called the active site, where catalysis takes place. Enzymes are highly specific: They bind specific substrates and catalyze particular reactions under certain conditions. The specificity of an enzyme results from the exact three-dimensional shape and structure of the active site.

35. Figure 6.10 Enzyme and Substrate

36. 6 Enzymes: Biological Catalysts The names of enzymes reflect their function:  RNA polymerase catalyzes formation of RNA but not DNA.  RNA nuclease hydrolyzes RNA polymers.  Hexokinase accelerates phosphorylation of hexose.  All kinases add phosphates. All phosphatases remove phosphates.

37. 6 Enzymes: Biological Catalysts Binding a substrate to the active site produces an enzyme–substrate complex (ES). Hydrogen bonding, ionic attraction, or covalent bonding acting individually or together hold these complexes together. The enzyme–substrate complex (ES) generates the product (P) and free enzyme (E): E + S  ES  E + P

38. 6 Enzymes: Biological Catalysts Enzymes lower activation energy requirements and thus speed up the overall reaction, but they do not change the difference in free energy (  G) between the reactants and the products. Thus they do not affect the final equilibrium. Enzymes can have a profound effect on reaction rates. Reactions that might take years to happen can occur in a fraction of a second.

39. Figure 6.11 Enzymes Lower the Energy Barrier

40. 6 Enzymes: Biological Catalysts At the active sites, enzymes and substrates interact by breaking old bonds and forming new ones. Enzymes catalyze reactions using one or more of the following mechanisms:  Orienting substrates  Adding charges to substrates  Inducing strain in the substrates

41. Figure 6.12 Life at the Active Site

42. 6 Enzymes: Biological Catalysts Enzymes orient substrates. While free in solution, substrates tumble and collide. The probability of collision at the angle necessary to change chemical interactions is low. When bound to enzymes, two substrates can be oriented such that a reaction is more likely to occur.

43. 6 Enzymes: Biological Catalysts The R groups of an enzyme’s amino acids can make substrates more chemically reactive. In acid-base catalysis, acidic or basic R groups form the active site and transfer H + to or from the substrate, destabilizing a covalent bond in a substrate. In covalent catalysis, a functional group side chain forms a temporary covalent bond with the substrate. In metal ion catalysis, metal ions gain or lose electrons without detaching from the protein, making them important participants in redox reactions.

44. 6 Enzymes: Biological Catalysts Some enzymes induce strain in the substrate. For example, the carbohydrate substrate for the enzyme lysozyme enters the active site in a flat- ringed “chair” shape. The active site causes it to flatten out into a “sofa” shape. The stretching of the bonds decreases their stability, making them more reactive to water.

45. Figure 6.13 Tertiary Structure of Lysozyme

46. 6 Molecular Structure Determines Enzyme Function Most enzymes are much larger than their substrate. The active site of most enzymes is only a small region of the whole protein. The specificity of an enzyme for a particular substrate depends on a precise interlock. In 1894, Emil Fischer compared the fit to that of a lock and key. In 1965, using X-ray crystallography, David Phillips observed a pocket in the enzyme lysozyme that neatly fit its substrate.

47. 6 Molecular Structure Determines Enzyme Function The change in enzyme shape caused by substrate binding is called induced fit. Induced fit at least partly explains why enzymes are so large. The rest of the macromolecule may have two functions:  To provide a framework so that the amino acids of the active site are properly positioned  To participate in the small changes in protein shape that allow induced fit

48. Figure 6.14 Some Enzymes Change Shape When Substrate Binds to Them

49. 6 Molecular Structure Determines Enzyme Function Some enzymes require other molecules in order to function: Cofactors are metal ions (e.g., copper, zinc, iron) that bind temporarily to certain enzymes and are essential to their function. Coenzymes are small molecules that act like substrates. They bind to the active site and change chemically during the reaction, then separate to participate in other reactions. Prosthetic groups are permanently bound to enzymes. They include the heme groups that are attached to hemoglobin.

50. Figure 6.15 An Enzyme with a Coenzyme

51. 6 Molecular Structure Determines Enzyme Function The rate of an uncatalyzed reaction is directly proportional to the concentration of reactants. This is true up to a point with catalyzed reactions, but then the rate levels off. This is due to saturation of the enzyme, when all the enzyme molecules are bound to substrate. Turnover number is the number of substrate molecules converted to product per unit time. The turnover number ranges from 1 molecule every 2 seconds for lysozyme, to 40 million per second for the liver enzyme catalase.

52. Figure 6.16 Catalyzed Reactions Reach a Maximum Rate

53. 6 Metabolism and the Regulation of Enzymes A major characteristic of life is homeostasis, the maintenance of stable internal conditions. Regulation of enzyme activity contributes to metabolic homeostasis.

54. 6 Metabolism and the Regulation of Enzymes An organism’s metabolism is the total of all biochemical reactions taking place within it. Metabolism is organized into sequences of enzyme-catalyzed chemical reactions called pathways. In these sequences, the product of one reaction is the substrate for the next. A B C D enzyme

55. 6 Metabolism and the Regulation of Enzymes Some metabolic pathways are anabolic and synthesize the building blocks of macromolecules. Some are catabolic and break down macro- molecules and fuel molecules. The balance among these pathways can change depending on the cell’s needs, so a cell must regulate its metabolic pathways constantly.

56. 6 Metabolism and the Regulation of Enzymes Enzyme activity can be inhibited by natural and artificial binders. Naturally occurring inhibitors regulate metabolism. Irreversible inhibition occurs when the inhibitor destroys the enzyme’s ability to interact with its normal substrate(s). DIPF, a nerve gas, irreversibly inhibits acetylcholinesterase, an enzyme necessary for propagation of nerve impulses.

57. Figure 6.17 Irreversible Inhibition

58. 6 Metabolism and the Regulation of Enzymes Not all inhibition is irreversible. When an inhibitor binds reversibly to an enzyme’s active site, it competes with the substrate for the binding site and is called a competitive inhibitor. When the concentration of the competitive inhibitor is reduced, it no longer binds to the active site, and the enzyme can function again.

59. Figure 6.18 (a) Reversible Inhibition (Part 1)

60. Figure 6.18 (a) Reversible Inhibition (Part 2)

61. 6 Metabolism and the Regulation of Enzymes When an inhibitor binds reversibly to a site distinct from the active site, it is called a noncompetitive inhibitor. Noncompetitive inhibitors act by changing the shape of the enzyme in such a way that the active site no longer binds the substrate. Noncompetitive inhibitors can unbind from the enzyme, making the effects reversible.

62. Figure 6.18 (b) Reversible Inhibition (Part 1)

63. Figure 6.18 (b) Reversible Inhibition (Part 2)

64. 6 Metabolism and the Regulation of Enzymes The change in enzyme shape due to noncompetitive inhibitor binding is an example of allostery. Allosteric enzymes are controlled by allosteric regulators. Allosteric regulators bind to an allosteric site, which is separate from the active site, and this changes the structure and function of the enzyme. Allosteric regulators work in two ways:  Positive regulators stabilize the active form.  Negative regulators stabilize the inactive form.

65. Figure 6.19 Allosteric Regulation of Enzymes

66. 6 Metabolism and the Regulation of Enzymes Allosteric enzymes usually have more than one type of subunit (quaternary structure). A catalytic subunit has an active site that binds the enzyme’s substrate. A regulatory subunit has one or more allosteric sites that bind specific regulators. In the active state, the active sites on the catalytic subunits can bind substrate. In the inactive state, the allosteric sites on the regulatory subunits can bind inhibitor.

67. 6 Metabolism and the Regulation of Enzymes Some allosteric enzymes have multiple active sites. When one binding site is occupied, it changes the other(s) so that they bind additional substrate molecules more readily. How the rate of a reaction changes with increasing substrate concentration depends on whether the enzyme is allosterically regulated. The enzyme’s catalytic rate becomes concentration-sensitive and concentration- responsive.

68. Figure 6.20 Allostery and Reaction Rate

69. 6 Metabolism and the Regulation of Enzymes Metabolic pathways typically involve a starting material, intermediates, and an end product. The first step in the pathway is called the start up or commitment step. Once this step occurs, other enzyme-catalyzed reactions follow until the product of the series builds up. One way to control the whole pathway is to have the end product inhibit the first step in the pathway. This is called end-product inhibition or feedback inhibition.

70. Figure 6.21 Inhibition of Metabolic Pathways

71. 6 Metabolism and the Regulation of Enzymes Rates of most enzyme-catalyzed reaction depend on the pH of the medium. Each enzyme is most active at a particular pH. pH can change the charges of the carboxyl and amino groups of amino acids. This affects the interactions of the amino acids and can change the structure of the protein.

72. Figure 6.22 pH Affects Enzyme Activity

73. 6 Metabolism and the Regulation of Enzymes Temperature also affects enzyme activity. High temperature can inactivate enzymes by breaking non-covalent bonds. If the tertiary structure is disrupted the enzyme is called denatured. Some organisms that can live at different temperatures generate different forms of an enzyme, called isozymes. Enzymes adapted to warm temperatures usually have a tertiary structure of covalent bonds, such as disulfide bridges.

74. Figure 6.23 Temperature Affects Enzyme Activity