Presentation on theme: "OSD MANUAL FOR 700TVL CAMERA. ■ LENS You can select AUTO or MANUAL mode, depending on the connected lens type. AUTO(TYPE, MODE, SPEED) : Select Auto Iris."— Presentation transcript:
■ LENS You can select AUTO or MANUAL mode, depending on the connected lens type. AUTO(TYPE, MODE, SPEED) : Select Auto Iris Lens. If you select the ‘AUTO’ mode, you can set up Auto Iris type, this mode of the lens and adjust iris speed. *TYPE (DC / VIDEO) : Sets the type of the Auto Iris Lens. *MODE (OPEN / CLOSE / AUTO) - OPEN : The lens iris is fixed to open. - CLOSE : The lens is fixed to close. - AUTO : The lens is controlled automatically. *SPEED ( 0 – 255) : Select the convergence speed of the lens iris. If the value is too high, the iris can operate improperly. *MANUAL : Set the manual iris lens or the fixed iris lens. ■ SHUTTER/AGC Used to control the light exposure in according to Auto Iris lens and Manual Iris lens. AUTO SETUP : Select for the Auto Iris type. You can set up the shutter value and the brightness level depending on the lighting conditions. *HIGH LUMINANCE : Select to the auto exposure mode under the middle/high-bright lighting conditions. 1.MODE (AUTO IRIS / SHUT+AUTO IRIS) 1)AUTO IRIS(Shutter fixed + Mechanical Auto Iris) : The electronic shutter value is fixed, the exposure is controlled using the mechanical iris. 2)SHUT+AUTO IRIS(Auto Electronic Shutter + Mechanical Auto Iris) : The auto exposure is controlled using the electronic shutter in the middle-bright lighting conditions and using mechanical iris in the high-bright lighting conditions. 2.BRIGHTNESS (0 ~ 255) : Adjusts the video brightness. As the value increases, the screen get brighter. *LOW LUMINANCE : Select the auto exposure mode under the low-bright lighting conditions. 1.MODE (AGC / OFF) : The auto exposure is controlled using Auto Gain Control. 2.BRIGHTNESS (x0.25 / x0.50 / x0.75/ x1.00) : Adjusts the video brightness. As the value increases, the screen gets brighter. MANUAL SETUP : Select for the Manual Iris type. You can set up the shutter value and the AGC value manually. *MODE (SHUT+ AGC ): Shttuer is fixed mode. *SHUTTER : Select the shutter speed (1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 : NTSC) *AGC : As the AGC gain value(6, 12, 18, 24, 30, 36, 42, 44.8dB) increases, the overall screen gets brighter but the level of noise is increased.
■ White Balance Use the White Balance function to adjust the screen color temperature under different lighting conditions. ATW (Auto Trace White balance) : This mode automatically tracks the changes of the color temperature(1,800˚K ~ 10,500˚K) and adjusts the white balanace in according to this ambient conditions. *SPEED (0~255) : Select the speed of ATW operations. *DELAY CNT(Count) (0~255) : Select the time-based hysteresis of ATW operations. *ATW FRAME (X0.5/X1/X1.5/X2) : Select the range of color temperature for AWT Frame operations. *ENVIROMENT (at Indoor/Outdoor) : Preset for either indoor or outdoor applications of the ATW operations - Indoor : It is fitted for the indoor lighting conditions(mainly sodium vapor lamp or indoor lighting) - Outdoor : It is fitted for the outdoor lighting conditions(mainly sunlight, clear sky or sunset) PUSH : Adjusts the white balance automatically under all conditions. Wide range Auto White Balance mode (AWB) USER1 : This mode is outdoor fixed gain mode and is fitted for outdoor lighting conditions. It can be controlled by B-GAIN/R-GAIN level(0~255). USER2 : This mode is fluorescent light fixed gain mode and is fitted for indoor lighting conditions. It can be controlled by B-GAIN/R-GAIN level(0~255). *Note : B-GAIN : BLUE GAIN / R-GAIN : RED GAIN ■ ANTI CR (Color Rolling Suppression ) This mode can minimize the problems related to color rolling caused by differences between the flicker of fluorescent lights and frequency of the camera. MANUAL (Manual White balance, 0~255) : This mode allows the white balance to be adjusted manually. Increased level makes strong blue tone on the screen and decreased level makes strong red tone on the screen. PUSH LOCK : This mode is set to the current white balance conditions and keep its value, so it can used all conditions, but if there is a change on location or light source, reset this mode. It is selected and press SET UP key.
■ BACK LIGHT It delivers a distinctive subject and background at the same time, even when the subject is in backlight. BLC (Back Light Compensation) : Enables a user to select a desired area on a picture and view that area more clearly. HLC (High Light Compensation) : If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the on-screen detail. ■ PICT ADJUST (OFF / BLC / HLC) MIRROR (ON/OFF) : Select to flip the picture horizontally on the screen. BRIGHTNESS : Adjusts the brightness of the displayed picture(Level : 0~255). CONTRAST : Adjusts the contrast of the difference between bright and dark areas on the screen(Level : 0~255). SHARPNESS : Adjusts the sharpness of the displayed picture(Level : 0~255). HUE : Adjusts the color tone of the displayed picture(Level : 0~255). GAIN : Adjusts the saturation of the displayed picture(Level : 0~255). ■ ATR(Adaptive Tone Reproduction) This mode allows adjustment of the picture to improve the visibility with widely contrasting scenes with different illumination levels between high-luminance(bright) and low-luminance(dark) areas in the same picture. LUMINANCE (LOW/ MID/ HIGH) : Select the extent of the luminance compression. CONTRAST (LOW/ MIDLOW/ MID/ MIDHIGH/ HIGH) : Select the extent of the contrast enhancement.
■ MOTION DET(Motion Detection) This product has a feature that allows you to observe movement of objects in 4 different areas on the screen, and the words 'MOTION' appear on the screen when movement is detected. You can monitor activity more efficient. DETECT SENSE (0~127) : Adjust the motion detection sensitivity level. BLOCK DISP (OFF / ON / ENABLE) : Select the status of Motion Detection Block display. *OFF/ON : Select on/off the function. *ENABLE : Select the block not to be displayed motion detection status. To define the area, select “ENABLE” and push SETUP button. MOTION AREA : Select on/off the function. AREA SEL : Select one of 4 zones. TOP/BOTTOM : Adjust the area to be enhanced (Level : 0~244). LEFT/RIGHT : Adjust the area to be enhanced (Level : 0~474). ■ PRAVACY Mask 8 different areas you want to hide on the screen. AREA SEL : Select one of 8 zones. TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced (Level : 0~244). COLOR (1~8) : Change one of 8 colors on the selected privacy zones. TRANSP (0.00/0.50/0.75/1.00) : Select the transparency ratio of the privacy zone area if color is selected. MOSAIC : Select on/off the function. ■ DAY&NIGHT AUTO : The mode is switched to ’Color‘ in a normal environment, but switches to ’B/W‘ mode when ambient illumination is low. To set up the switching time for AUTO mode, press the SET button. *BURST : Select on/off the function on B/W mode. *DELAY CNT(Count) (0~255) : Adjust the delay time about changing Color B/W mode(Level : 1~30sec). *DAY NIGHT : Adjust the illumination threshold about changing Day Night mode(Level : 0~255). COLOR : The picture is always displayed in color. B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. *BURST : Select on/off the function.
■ NR (2D-NR) Select the Digital Noise Reduction in low light conditions. NR MODE : Select the 2D NR filter mode. *Y : Select on the Y filter(Luminance). *C : Select on the C filter(Chrominance). *Y/C : Select on the Y/C filter. Y LEVEL(0~15) : Adjust the Y filter(Luminance) strength. C LEVEL(0~15) : Adjust the C filter(Chrominance) strength. ■ CAMERA ID Select the camera ID to display ON/OFF. Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET button. Repeat this to enter multiple letters. You can enter up to 26 letters per a line. Enter a title, move the cursor to ‘POS’ and press the SET button. Select the position to display the ID on the screen by using the 4 direction buttons and press the SET button. ■ LANGUAGE : Select OSD language among ENGLISH, JAPANESE, DEUTSCH, FRANCAIS, РУССКИЙ, PORTUGUÊS and ESPAÑOL
■ CAMERA RESET : Select to return the camera to the factory default settings. ■ SAVE ALL : Save all the current changed menu. ■ NEXT/BACK NEXT : Go to the next page of menu. BACK : Return the previous page of menu. ■ EXIT : Exit the OSD menu without saving. ■ CAMERA RESET : Select to return the camera to the factory default settings. ■ SAVE ALL : Save all the current changed menu.