1. 192.168.0.1/24 Host Name :R1 Model : 1841 WIC-1T Serial 0/0/0 Basic Configuration

2. 192.168.0.1/24 Host Name :R1 Model : 1841 WIC-1T Serial 0/0/0 Basic Configuration #enable #conf ter #hostname R1 #interface s0/0/0 #ip address 192.168.0.1 255.255.255.0 #no shut

3. 192.168.0.1/24 Host Name :R1 Model : 1841 WIC-1T Serial 0/0/0 Password Recovery OLD Password : cisco New Password : router

4. 192.168.0.1/24 Host Name :R1 Model : 1841 WIC-1T Serial 0/0/0 Password Recovery OLD Password : cisco New Password : router Change configure-register to be 0x2142 #reload Ctrl+Break #confreg 0x2142 #reset Change to be new password #copy startup-configure running-configure #config terminal #enable secret ………. (new password) #configure-register 0x2102 #wr or copy run start #reload

5. 192.168.1.1/24 Host Name :R1 Model : 1841 FE 0/0 Open Telnet/ Console Password 192.168.1.2/24

6. 192.168.1.1/24 Host Name :R1 Model : 1841 WIC-1T FE 0/0 Open Telnet/ Console Password 192.168.1.2/24 Set password console #conf ter #line console 0 #password cisco #login Set password telnet #conf ter #line vty 0 4 #password cisco #login #enable #conf ter #hostname R1 #interface fa0/0/0 #ip address 192.168.1.1 255.255.255.0 #no shut Encrypt password #service password-encryption

7. FA 0/0 192.168.1.0/24.1.2 R1 TFTP Server Backing Up and Restoring to TFTP Server Copy flash tftp: Copy tftp: startup-configure

8. 192.168.0.0/24 Host Name : R1 Serial 0/0/0.1.2 Host Name : R2

9. 192.168.0.0/24 Serial 0/0/0.1.2 192.168.1.0/24 192.168.2.0/24.1.2 R1 R2 Static Route PC1 GW:192.168.1.1 PC2 GW:192.168.2.1 F0/0

10. 192.168.0.0/24 Serial 0/0/0.1.2 192.168.1.0/24 192.168.2.0/24.1.2 R1 R2 Load Sharing Static Route 192.168.3.0/24 Serial 0/1/0.1.2

11. 192.168.0.0/24 Host Name : R1 Serial 0/0/0.1.2 Host Name : R2 192.168.1.0/24 192.168.2.0/24.1.2 Serial 0/0/0.2 Host Name : R3 192.168.4.0/24.1.2 Serial 0/1/0 192.168.3.0/24.1 Static Route and Default Route F0/0 PC1 GW:192.168.1.1 PC2 GW:192.168.2.1 PC3 GW:192.168.4.1

12. 192.168.0.0/24 Host Name : R1 Serial 0/1/0.1.2 Host Name : R2 192.168.1.0/24 192.168.2.0/24.1.2 Serial 0/1/0.2 Host Name : R3 192.168.4.0/24.1.2 Serial 0/0/0 192.168.3.0/24.1 Dynamic Route [RIP] R1(config) router rip R1(config-router)# network 192.168.1.0 R1(config-router)# network 192.168.0.0 R2(config) router rip R2(config-router)# network 192.168.0.0 R2(config-router)# network 192.168.2.0 R2(config-router)# network 192.168.3.0 R3(config) router rip R3(config-router)# network 192.168.3.0 R3(config-router)# network 192.168.4.0

13. 192.168.0.0/24 Host Name : R1 Serial 0/1/0.1.2 Host Name : R2 192.168.1.0/24 192.168.2.0/24.1.2 Serial 0/1/0.2 Host Name : R3 192.168.4.0/24.1.2 Serial 0/0/0 192.168.3.0/24.1 Dynamic Route [OSPF] R1(config) router ospf 1 R1(config-router)# network 192.168.1.0 0.0.0.255 area 0 R1(config-router)# network 192.168.0.0 0.0.0.255 area 0 OSPF Area 0 R1(config) router ospf 1 R1(config-router)# network 192.168.4.0 0.0.0.255 area 0 R1(config-router)# network 192.168.3.0 0.0.0.255 area 0

14. 192.168.0.0/24 F0/2 F0/4F0/3 F0/1.1.2.3.4 2960 #int fast Ethernet 0/1 #switchport mode access

15. 10.1.30.0/24 Engineering VLAN 30 10.1.20.0/24 Accounting VLAN 20 10.1.10.0/24 Admin VLAN 10 10.1.1.0/24 Native VLAN 1 Catalyst 2960 Ports:1-8 Ports:9-15 Ports:16-24

16. Vlan 2 192.168.2.1 Vlan 2 192.168.2.2 F0/1 Gi1/1 F0/1 Gi1/1 Gi1/2 IEEE 802.1q Trunk Vlan 2 – sale Vlan3 - engineering Vlan 3 192.168.3.1 Vlan 3 192.168.3.2 F0/2 SW1 SW2 SW3

17. Server Client IEEE 802.1q Trunk Vlan 2 – sale Vlan3 – engineering Vlan4 – guest Transparent Client IEEE 802.1q Trunk Domain : Cyber Password : cisco SW4 SW2 SW3 SW1 SW5SW6

18. VLAN 3 VLAN 2 192.168.1.0/24 192.168.2.0/24.2 G1/2 F0/1.2 Vlan 3 :: 192.168.1.1 Vlan 2 :: 192.168.2.1 2960 G1/1 Trunk Line VTP Domain : PSU VTP Server : ws-c3560 VTP Client : ws-c2960 3560 2960 G1/1 F0/1 VLAN 2 192.168.2.0/24.3 F0/2 VLAN 3 192.168.1.0/24.3 F0/2

19. .1 R1 192.168.0.0/24 Cisco configuration of DHCP service on a Router or L3 Switch Network subnet : 192.168.0.0 255.255.255.0 Gateway Address : 192.168.0.1 DNS Server : 4.2.2.2 Excluded Addresses : 192.168.0.1 to 192.168.0.10

20. .1 R1 192.168.0.0/24 Cisco configuration of DHCP service on a Router or L3 Switch Network subnet : 192.168.0.0 255.255.255.0 Gateway Address : 192.168.0.1 DNS Server : 4.2.2.2 Excluded Addresses : 192.168.0.1 to 192.168.0.10 #ip dhcp pool mypool #network 192.168.0.0 255.255.255.0 #default-router 192.168.0.1 #dns-server 4.2.2.2 #exit #ip dhcp excluded-address 192.168.0.1 192.168.0.10

21. .1 R1 192.168.1.0/24 99.99.99.99/24 Internet NAT – Network Address Translation.8.7 FA0/0 FA0/1

22. .1 R1 192.168.1.0/24 99.99.99.99/24 Internet NAT – Network Address Translation.8.7 FA0/0 FA0/1 ip nat inside source list 1 interface FastEthernet0/1 overload access-list 1 permit 192.168.1.0 0.0.0.255 interface FastEthernet0/0 ip address 192.168.1.1 255.255.255.0 ip nat inside interface FastEthernet0/1 ip address 99.99.99.99 255.255.255.0 ip nat outside

23. 172.16.20.1/24 Edmonton Fa0/1 50.1 RedDeer 80.1 Calgary 10.1 30.130.2 60.1 40.1 60.2 70.1 50.7520.163 80.16 50.7 70.270.540.8910.5 ACL – Access Control List