Presentation on theme: "December 16 20081 Extraction of exclusive neutral pions electro-production cross sections in Hall Jefferson Laboratory. Eric FUCHEY Ph.D"— Presentation transcript:
December Extraction of exclusive neutral pions electro-production cross sections in Hall Jefferson Laboratory. Eric FUCHEY Ph.D Laboratoire de Physique Corpusculaire UMR 6533 CNRS/IN2P3 Université Blaise Pascal Clermont-Ferrand
December Kinematic variables Virtuality: Momentum fraction: Quadri transfert to proton: *- azimuthal angle: *-p CM energy: Transverse momentum:
December Formalismes Drechsel-Tiator (Nucl.Part.Phys.18(1992) ): with and More « intuitive » formalisme
December Formalismes Levelt-Mulders (Phys.Rev.D.49(1994)96-113) : Show an explicit dependence in transverse momentum
December Formalismes: comparison Interest: Being able to get easily cross sections from Drechsel- Tiator as function of pion transverse momentum: With :
December Outline 1– Motivations 2– 0 electroproduction formalismes –Kinematical variables –Formalismes 3- Experimental layout 4– Extraction des section efficaces –Calibration –Extraction method –Selection cuts 5– Conclusion and perspectives
December DVCS experiment Incident beam : E = 6 GeV, L ~ cm -2 s -1 during experiment –Scattered electron measured by HRS –2 photons issued from 0 measured by 132 PbF 2 blocks calorimeter –Recoil proton detected by proton array -> not used
December Calibration Goal : searching coefficients to apply to calorimeter blocks in order to: –bring their reconstructed missing mass squared value to the proton missing mass squared. –Bring then simulated missing mass mean and resolution to real ones Mp2Mp2
December Calibration Calibration has been performed for set of Kin3 0 data and our set of Kin3 0 simulated.
December Extraction method Kinematical domains : –Kin2: x Bj = 0.36, Q 2 = 1.9 GeV 2 –Kin3: x Bj = 0.36, Q 2 = 2.3 GeV 2 Analysis made according to t min -t. Fitting real data with simulated to take into account of acceptance effect.
December Extraction method Principle: compare expected number of counts for data to expected number of counts for simulated No access What we want to extract
December Selection cuts Missing mass cut to ensure exclusivity Each photon is in a calibrated block, and E > 1.0 GeV k = pHRS +/- 4.5% ; r-function > cm < z vtx < 7.5 cm.
December Fit results Fit has been performed for helicity-independent cross section and helicity-dependent cross section However, still not able to extract cross sections (debugging…) 2 /NDF = /NDF = 0.76
December – Conclusion / perspectives 0 electroproduction cross section extraction in Hall A is in progress. Calibration has been performed (see talk on calibration this afternoon) Once first results obtained: –Optimizing some selection cuts –Study evolution in other variables: x Bj, Q 2, W