Presentation is loading. Please wait.

Presentation is loading. Please wait.

DMSMS: Counterfeits and the Industrial Base Brad Botwin Director, Industrial Base Studies Office of Technology Evaluation September 23, 2008.

Similar presentations


Presentation on theme: "DMSMS: Counterfeits and the Industrial Base Brad Botwin Director, Industrial Base Studies Office of Technology Evaluation September 23, 2008."— Presentation transcript:

1 DMSMS: Counterfeits and the Industrial Base Brad Botwin Director, Industrial Base Studies Office of Technology Evaluation September 23, 2008

2 Bureau of Industry & Security (BIS) MISSION: Advance U.S. national security, foreign policy and economic interests. BIS develops export control policies, issues export licenses, prosecutes violators, as well as monitors the capabilities of the defense industrial base.

3 OTE Industry Assessments - Background Under the Defense Production Act of 1950, ability to assess:  Economic health and competitiveness  Defense capabilities and readiness Enable industry and government agencies to:  Monitor trends and benchmark industry performance  Raise awareness of diminishing manufacturing and technological capabilities More than 50 industry studies & 125+ surveys

4 Counterfeit Electronics Study - Goals Assess the impact of counterfeit electronics on U.S. supply chain integrity, critical infrastructure, and industrial capabilities Recommend best practices to mitigate risk to U.S. supply chain Study sponsored by Naval Air Systems Command with support from Semiconductor Industry Association (SIA)

5 Counterfeit Electronics - Broad Definition An electronic part that is not genuine because:  An unauthorized copy  Does not conform to original OCM design, model, and/or performance standards  Not produced by the OCM or is produced by unauthorized contractors  An off-specification, defective, or used OCM product sold as "new" or working  Has incorrect or false markings and/or documentation

6 Counterfeit Electronics Study -OTE s urveys distributed 5 separate but related surveys targeting:  Microchip & discrete electronic manufacturers – 106  Electronic board producers/assemblers – 37  Distributors and brokers of electronic parts – 144  Prime contractors and subcontractors – 147  DOD arsenals, depots, and DLA – 48 482 total survey participants

7 Counterfeit Electronics Study -Survey Objectives Each survey contained approx. 80 questions  Scale and scope  Past problems and impact  Internal procurement policies and protocols  Testing, inspection, and inventory management  Post-identification procedures  Industry and government best practices Tried to keep questions uniform across surveys.

8 Type of Company Encountered Counterfeits No Counterfeit Incidents Total OCMs Discrete Electronic Components 91726 Microcircuits131528 Distributors Authorized Distributors 61925 Independent Distributors 25833 Brokers718 Board Assemblers 51924 Total6579144 BIS Counterfeit Electronics Survey – Preliminary Data

9 Total Counterfeit Incidents: OCMs, Distributors, Board Assemblers 2005 - 2008

10 Counterfeit Incidents by Product Resale Value: Overall (2007)

11 Counterfeit Incidents by Product Resale Value: Distributors (2007)

12 Counterfeit Incidents by Type (2007)

13 Percent of Counterfeit Incidents Involving In/Out of Production Products 2005 - 2008

14 How Companies Are Uncovering Counterfeits (2007)

15 How Companies Are Uncovering Counterfeits: OCMs (2007)

16 How Companies Are Uncovering Counterfeits: Distributors (2007)

17 Percent of Companies With Documented Cases of Counterfeits Sold by Specific Entities

18 * Each company was asked to provide their top five suspected countries Top Countries Suspected/Confirmed to be Sources of Counterfeits*

19 Counterfeits Damaging a Company’s Reputation OCM Comment: “With counterfeit goods in the market, purchasers are not sure if they received genuine or fake goods, so they tend to avoid the brand entirely.” Distributor Comment: “When distributors or brokers trade in counterfeit parts the entire industry’s reputation is tarnished with a ‘guilty by association’ mentality.” Percent of Companies Indicating Counterfeits Have Negatively Effected Their Image or Reputation Discrete Electronic Component Manufacturers 12% Microcircuit Manufacturers 36% Authorized Distributors 8% Independent Distributors 45% Brokers63%

20 Top 10 Reasons Identified by All Companies for Counterfeits Entering the U.S. Supply Chain Reason Number of Companies Less Stringent Inventory Management by Parts Brokers75 Greater Reliance on Gray Market Parts by Brokers72 Greater Reliance on Gray Market Parts by Independent Distributors 62 Insufficient Chain of Accountability58 Less Stringent Inventory Management by Independent Distributors 56 Inadequate Purchase Planning by OEMs50 Insufficient Buying Procedures49 Purchase of Excess Inventory on Open Market48 Greater Reliance on Gray Market by Contract Manufacturers44 Inadequate Production by OCMs42

21 Pre-Stock Testing By Type of Supplier (Distributors and Board Assemblers Only) Only 56% of Distributors and Board Assemblers test products they purchase before placing them in inventory. Average Percent of Incoming Parts Tested by Type of Supplier OCMs52% OEMs44% Authorized Distributors 52% Independent Distributors 58% Brokers62% Internet-Exclusive Sources 38%

22 Percent of Distributors Conducting Pre-Stock Testing

23 Percent of Board Assemblers Conducting Pre- Stock Testing

24 Percent of Companies Performing Inventory Audits for Counterfeits

25 Contractor Testing Problems Four companies had problems with Non-U.S. contractors concerning improper management or theft of electronic scrap after testing. 17 companies, 41% of those employing testing contractors, had problems with U.S.-based firems concerning faulty or forged testing.  The parts were cleared by the testing house, but were later found to be counterfeit by the customer. This is an area that deserves further analysis.

26 Steps Taken After Notification of a Counterfeit Incident: OCMs Notify Internal Company Authorities74% Trace Supply Chain70% Inform Authorized Distributors41% Locate Select Inventory39% Pull Back Inventory31% Perform Random Testing20% Notify Industry Associations19% Notify Federal Authorities19% Other17% Wait for Additional Complaints17% No Steps Are Taken6%

27 Steps Taken After Notification of a Counterfeit Incident: Distributors Pull Back Inventory61% Notify Internal Company Authorities56% Notify Industry Associations52% Locate Select Inventory50% Trace Supply Chain48% Perform Random Testing35% Inform Authorized Distributors30% Inform OCMs30% Notify Federal Authorities11% No Steps Are Taken9% Other8% Wait for Additional Complaints5%

28 Steps Taken After Notification of a Counterfeit Incident: Circuit Board Assemblers Pull Back Inventory63% Notify Internal Company Authorities58% Locate Select Inventory58% Inform Authorized Distributors54% Inform OCMs50% Trace Supply Chain46% Perform Random Testing29% Notify Industry Associations8% Notify Federal Authorities8% Other8% Wait for Additional Complaints8% No Steps Are Taken8%

29 Steps Taken After Possession of a Counterfeit Part Action TakenOCMsDistributors Circuit Board Assemblers Enter into USG or Industry Database11%41%4% Retain Samples for Reference63%33%13% Test Part56%50%46% Enter into Company Database50%59%42% Quarantine Parts26%33%21% Leave Disposal to Party Filing Complaint 26%9%8% Random Inventory Testing19%38%42% Disposal of Parts Immediately17%36%13% Issue Credit15%64%58% Turn Over to Law Enforcement Authorities for Analysis 15%7%29% Check USG or Industry Database11%47%13% Other11%14%8% Turn Over to Law Enforcement Authorities After Analysis 11%6%17% Return to OCM or Distributor11%33%25%

30 Who Ya Gonna Call? 56% of OCMs, 65% of Distributors, and 75% of Board Assemblers DO NOT KNOW what authorities to contact when they encounter counterfeits. 71% of distributors tell customers to contact their firm if they encounter a counterfeit product. Top Authorities Contacted (As a Percent of Total Companies) None at all35% GIDEP10% FBI8% Customs and Border Protection 6% ERAI6% IDEA6% DLA6% State/Local Authorities 6%

31 “Fun” Facts Only 38% of surveyed companies maintain a database to keep track of counterfeit incidents.  63% of these companies are distributors. 67% of Circuit Board Assemblers co-mingle identical parts from multiple suppliers in the same bin.  Only 14% of distributors do the same. 40% of companies stated that they find it difficult to identify counterfeits.  However, 61% of companies find it easier to identify counterfeits today than they did five years ago.

32 Industry Best Practices – 500! From OCMs: Ensure proper disposal of all scrap – crush all defective/unused products to prevent re-circulation. Train all employees on how to identify and handle counterfeit parts. Tighten contractual obligations with contract manufacturers regarding disposal of unused product. From Circuit Board Assemblers: Audit OCMs/OEMs to ensure that the purchased part is made within their facility and not contracted out. Perform destructive testing if a part cannot be verified by other means. Establish qualifications for supplier purchases. Most common responses – Don’t buy from China – Be wary of Brokers

33 Industry Best Practices (cont.) From Authorized Distributors: Ask for Certificates of Compliance for all products purchased. Educate your sales team regarding the risk of parts brokers. Create a central database for identifying counterfeit suppliers. Do not approve returns in greater quantities than the original purchase. From Independent Distributors/Brokers: Always purchase parts via escrow payments – Suppliers that believe in their product will not mind waiting for their money. Audit all inventory purchased before anti-counterfeiting measures were put in place. Follow IDEA 1010 for incoming inspections. Use www.icphotos.org for visual verification of parts.www.icphotos.org

34 Company Comments “It is encouraging that the U.S. government has finally recognized the scope of the problem and seems to be taking meaningful steps to counteract the counterfeiting plague.” - Independent distributor “Our participation in this Assessment has heightened our level of attention and understanding concerning the importance of being proactive in combating counterfeit products … We appreciate the information that was presented within this Assessment and plan to implement appropriate internal/external actions necessary to mitigate the potential for a counterfeit incident to occur within our operation.” - Authorized distributor

35 Depot/DLA Unique Questions Parts acquisition criteria  Government/industry, low bid/best value, foreign sourcing  Direct shipping to field Commercial supplier criteria Platforms/subsystems affected by counterfeits (2005-2008) Parts acquisition training Impact of DFAR Quality assurance and testing Record keeping

36 Next Steps Continue compliance on the 5 surveys Verify and begin analysis of data Draft report and release public document in early 2009 Work with industry and government to develop and implement best practices

37 BIS/OTE Contacts Brad Botwin  Director, Industrial Studies  Office of Technology Evaluation  202-482-4060  bbotwin@bis.doc.gov Teresa Telesco  Industry Analyst  202-482-4959  ttelesco@bis.doc.gov www.bis.doc.gov Come see us in Booth #212


Download ppt "DMSMS: Counterfeits and the Industrial Base Brad Botwin Director, Industrial Base Studies Office of Technology Evaluation September 23, 2008."

Similar presentations


Ads by Google