1. Introduction to Global Positioning Systems (GPS) Prepared for USDA

2. Module Goals Uses for GPS GPS terminology GPS operation Differential correction Limitations of GPS

3. Uses for GPS Determine 3-Dimensional Positions Measure Lengths/Distances Measure Areas Navigation Precise Timing

4. Barn Location Latitude 39.5673 N Longitude 115.345 W The key function of GPS is to locate your position on the Earth

5. GPS can be used to measure distances Point to Point Distance = 200 ft Length of Berm = 350 ft

6. GPS can be used to measure areas Rectangular field measured using corner points A circular field would best be measured using a track

7. Navigation with GPS Straight line between two points Route between two points Finish Start

8. GPS Mapping The data collected using GPS can be used to make maps of natural resources, physical infrastructure or any other geographic features.

9. Precise time obtained from GPS The signal that the GPS satellites broadcast contains a very precise time signal that can be read at an accuracy of up to 40 billionths of a second. Uses of GPS timing: Financial Markets Telecommunications

10. Applications of GPS Precision Farming - Use GPS with yield monitors to map the productivity of fields - Use GPS with variable rate applicators to address variable fertility or weed densities in fields Digital Photography - Stamp photographs with the coordinates of the location where they were taken Navigation -Use GPS to show your position on a map and guide you to a destination point

11. GPS is funded by and controlled by the U. S. Department of Defense (DOD). The system is called NAVSTAR, which stands for “Navigational Satellite Timing and Ranging” GPS provides specially coded radio signals that can be processed in a GPS receiver, enabling the receiver to compute position, velocity and time. The signals are available world wide and the system is designed to function in all weather conditions What is GPS? GPS is a positioning system based on a network of satellites that continuously transmit coded information. The information transmitted from the satellites can be interpreted by receivers to precisely identify locations on earth by measuring distance from the satellites.

12. Three Components to GPS Space Segment User Segment Control Segment

13. The nominal GPS Operational Constellation consists of 24 satellites. Each satellite orbits the earth in about 12 hours. The satellite orbits repeat almost the same ground track once each day The GPS signal has information about the precise position of the satellite as well as precise time GPS Constellation Source: Peter H. Dana, The University of Colorado. http://www.colorado.edu/geography/gcraft/notes/gps/gps_f.html

14. GPS Satellite Signals Transmitted on the L1 radio frequency Almanac data Ephemeris data Pseudo-Random Code

15. DOD maintains five control stations around the world that monitor the satellites and update their orbital information Monitor stations track the position of the satellites and message that they are broadcasting The master control station in Colorado sends data back to the satellites to make their signal more correct Corrected information is received by the GPS unit carried by military and civilian users all over the world GPS Control Segment

16. Satellite Ranging The GPS receivers figure out how far they are from the satellite by calculating the difference between when the pseudo-random code was sent from the satellite and when it arrived at the receiver Distance = (Travel Time) * (Speed of Light) This distance is known as the range or pseudo-range because the distance is not exact due to receiver clock inaccuracy

17. Positioning Using the GPS Signal The GPS signal carries two basic pieces of information A ranging code allows the receiver to determine the time the signal was sent The position code tells the receiver where the satellite was when the signal was sent.

18. GPS Accuracy GPS receivers are subject to several sources of error that decrease the accuracy of their readings. These include: Ionosphere and troposphere delays - The satellite signal can be slowed or refracted as it passes through the atmosphere Signal multi-path - Occurs when the GPS signal is reflected off of objects such as tall buildings before it reaches the receiver Receiver clock errors - The clock built in to the receiver can have slight timing errors Orbital errors - Inaccuracies of the satellites reported position Number and geometry of satellites visible - The more satellites the receiver can “see” the better. Trees, buildings, and terrain can block the signal, decreasing accuracy

19. DGPS Differential Global Positioning Systems DGPS improves the accuracy and integrity of standard GPS DGPS works by placing GPS receivers at a known locations The reference station knows its exact location, and therefore can calculate the difference between the satellite derived positions and the true position. These “differential corrections” are used to correct the positions obtained by roving GPS units either in real time or through post- processing Typical DGPS accuracy is between 1-5 meters, depending on the distance between the roving receiver and the reference station. Differential corrections are useful up to 250 mile from the reference station

20. NDGPS Nationwide Differential Global Positioning System Known Position Coast Guard base station and differential transmitter Differential correction signal Mobile GPS unit

21. Wide Area Augmentation System (WAAS) Mobile GPS unit GPS Satellites WAAS Satellite Differential Correction Signal

22. GPS Error not Addressed by DGPS Poor Satellite Geometry Poor Satellite Visibility Multipath Interference

23. Expected Accuracy varies by type of GPS unit Standard GPS - 15 meters NDGPS - 5 meters WAAS - 3 meters Code Phase GPS - 10cm to 1meter Survey Grade - sub-centimeter

24. Bottom Line Keep an eye on your estimated accuracy and make sure that the data you are gathering meets program accuracy standards. Understand that sometimes GPS will work better than other times. Be prepared to use other tools if GPS is not appropriate.

25. A New Tool In The USDA Tool Box GPS Applications - USDA Uniform Implementation - Supporting Agency's Mission & Programs - Enabling Conservation Partners Unit 1 – Overview of GPS, DGPS, Equipment & Applications

26. GPS Applications – USDA Implementation USDA is committed to uniform implementation Geospatial capability for the Farm Service Agencies; FSA, NRCS, RD.

27. USDA GPS Equipment Contract Configuration 1 GPS / NDGPS 1 – 2 meter accuracy Configuration 2 GPS SPS accuracy, 6 – 13 meters

28. USDA Digital Camera Contract Olympus C-4000 Configuration 1 (for XP use) Configuration 2 (for non-XP use)

29. GPS Applications  Navigation Initial and Revisit  Positioning Point, Line, Area  Field Data Collection Assessing / Planning Mapping / Inventorying  Field Data Utilization Application Certification / Verification Monitoring

30. GPS Applications Conservation Planning District Conservationist, Manhattan, KS maps a field of canola using GPS.

31. GPS Applications Soil Mapping Soil Scientist, Washington Co. IA maps soils with GPS

32. GPS Applications NRI Collecting resource data for the National Resources Inventory program using GPS and a PDA

33. GPS Applications Cultural Resource Mapping Resource Conservationist, Shelly, MT measures diameter of a tepee ring (used in place of tent pegs before the use of steel). GPS can accurately position and record the site for prosperity.

34. GPS Applications Field Measurement NRCS Earth Team Volunteer, Lehi, UT, measures and area of pasture the old way. GPS can provide more accurate area measurements and a permanent record and map.

35. GPS Applications Inventorying & Monitoring Engineer, Cass Co. IA uses GPS and a PDA to record status of an in-stream conservation structure built with Emergency Conservation Program funds.

36. GPS Applications - Mobile Mapping Dual GPS / NDGPS External Antenna Notebook PC Running ArcView / ArcPad Mobile Communications GPS Map 76

37. The USDA “Tool Box” Has An Assortment of Tools. GPS Tools Configuration 1 & 2 Data Collection Tools Digital Camera / Mobile Devices Communication Tools Internet / Mobile phones Information Tools Desktop Computing / Servers