1. 1 Simulation of Compressible Flow around the Bullet Trains Project Members: Tatiya SameeyaiB5212828 Cheerawan Thetchanda B5228591 Project Advisor: Assist.Prof.Dr.Keerati Suluksna School of Aeronautical Engineering, Institute of Engineering, Suranaree University of Technology P R O J E C T Engineering EP-255X-X-XX

2. 2 Background P R O J E C T Engineering Fig.1 The original model of bullet train head is usually encountered with shock effect during it run through the tunnel because of rapidly change in density of air between outside-to-inside zone of tunnel. Fig.2 New model of bullet train head is designed like the king fisher bird to resolve the effect of shock.

3. 3 Objective P R O J E C T Engineering  To Simulate the aerodynamics behavior around the two model of bullet trains, original and kingfisher models, under the condition of compressible flow.

4. 4 Scopes P R O J E C T Engineering  Two models of bullet train heads, original and king fisher model, are determined in the project activities.  Three flow speed of 250, 270, 300 km/hr have been investigated in the simulation.  The simulation will be investigated under the condition of turbulence compressible flow by means of CFD method with ANSYS Fluent 12.0  Tunnel bore size of 6.4 m will be considered here.

5. 5 Expectation  The behaviors of air flow around the two models of bullet train head, the original and king fisher models, under the conditions of viscous and incompressible flow based on turbulence model prediction.  Comparison results of wall shear stress of two those models due to the skin friction. P R O J E C T Engineering

6. 6 P R O J E C T Engineering Activities CAD Files Creation Fig.3 Bullet train geometries created from computer program for the original model (top) and new model (bottom)

7. 7 Original Model: Simulation results under the condition of (upper) incompressible flow and (lower) compressible flow New Model (King fisher model): Simulation results under the condition of (upper) incompressible flow and (lower) compressible flow P R O J E C T Engineering Activities Simulation Results: Wall Shear Stress Fig.4 Comparison of predicted wall shear stress for the two considered models: (left) Original model and (right) New model (King fisher model)

8. 8 P R O J E C T Engineering Project Plan Activities Week 1Week 2Week 3Week 4Week 5Week 6Week 7Week 8Week 9Week 10Week 11 1Survey the project information 2Practice on software and validation 3Create CAD models 4Simulate the air flow 5Conclusion and Report writing

9. 9 THANK YOU Q & A P R O J E C T Engineering