Presentation is loading. Please wait.

Presentation is loading. Please wait.

Work Package 2 / 3 TECHNOLOGIAL & PROCEDURAL HARMONISATION FixO3 General Assembly 14 th to the 16 th October 2014, Heraklion-CRETE Maureen Pagnani, BODC/NOC,

Similar presentations


Presentation on theme: "Work Package 2 / 3 TECHNOLOGIAL & PROCEDURAL HARMONISATION FixO3 General Assembly 14 th to the 16 th October 2014, Heraklion-CRETE Maureen Pagnani, BODC/NOC,"— Presentation transcript:

1 Work Package 2 / 3 TECHNOLOGIAL & PROCEDURAL HARMONISATION FixO3 General Assembly 14 th to the 16 th October 2014, Heraklion-CRETE Maureen Pagnani, BODC/NOC, M.Pagnani@bodc.ac.uk

2 WP 2 / WP3 – Technological & Procedural Harmonisation Task 2.1:Review of the current status of all fixed observing sites Task 3.1: Assessment of procedures Current status of the PAP Observatory (October 2014) Position: 49 o N 16.5 o W Type moorings and bathysnap on seafloor PAP12 Meteorological sensors, wave sensors, Sea temperature, Salinity, Pressure, Oxygen, CO 2, Nitrate+Nitrite, Alkalinity, Irradiance PAP3 Sediment traps, current meters and deep microcat PIs Richard Lampitt and Henry Ruhl Sue Hartman, Mark Hartman, Corinne Pebody Jon Campbell, Miguel Charcos Llorens Mooring Team and Ship’s company

3 WP 2 / WP3 – Technological & Procedural Harmonisation Task 2.1:Review of the current status of all fixed observing sites Task 3.1: Assessment of procedures Current status of the Observatory (October 2014) Positions:PAP349 o N 16.5 o W NOG23.77 o N 41.1 o W SOG 18.53 o S 25.1 o W Type Sub-surface mooring Sediment traps, current meters and deep microcat PI Richard Lampitt Corinne Pebody Mooring Team and Ship’s Company

4 Significant results/highlights during the first year project Recently published data (Hartman et al, 2014) shows an increase in seawater pCO 2 from earlier data published by Kortzinger et al, 2008). There was no significant change in CO 2 flux between the two time periods shown (-1.52 ± 0.7 mmol m -2 d -1 for the 2003-2005 period and -1.36 ± 0.6 mmol m -2 d -1 for the 2010-2012 period). Hartman, S., et al., 2014. Biogeosciences Discuss., 11, 12415-12439, 2014 Körtzinger, A. et al., 2008. Journal of Geophysical Research: Oceans 113 Data Management and Data Access Real-Time: Meteorological variables, wave sensors, Sea temperature, Salinity, Pressure, Oxygen, CO 2, Nitrate+Nitrite, Alkalinity, Irradiance Delayed Mode: Temperature, Salinity, Pressure, Oxygen coded so far, rest to be completed when resources availble Maureen Pagnani & BODC staff WP 2 / WP3 – Technological & Procedural Harmonisation Task 2.1:Review of the current status of all fixed observing sites Task 3.1: Assessment of procedures

5 WP 2 / WP3 – Technological & Procedural Harmonisation Task 2.1:Review of the current status of all fixed observing sites Task 3.1: Assessment of procedures

6

7 Training of personnel Documentation ( cruise reports, meta data) is important however A ‘How to’ document is not enough on its own Personnel training ensures continuity of methods Each cruise take lots of pictures – they are a really useful tool WP 3 – Procedural Harmonisation Task 3.1: Assessment of procedures

8 Laboratory calibration Instruments calibrated against primary standards where possible Figure 1: Lab Calibration of the SUNA nitrate sensor in the ultra-pure (Milli-Q/DI) water. WP 3 – Procedural Harmonisation Task 3.1: Assessment of procedures

9 Instrumentation pre and post calibration Mooring Instrumentation mounted on CTD cast Biofouling WP 3 – Procedural Harmonisation Task 3.1: Assessment of procedures

10 Data Inspection Regular visual Inspection of the telemetered data is important E.g. GPS notifies of possible mooring drift Graphical data output allows instruments with problems to be identified prior to mooring turnaround Identification of fouling effects Can provide clues to technical problems. Changes in environmental parameters can be identified and acted upon ( e.g. by a change in sampling strategy or instrument range) WP 3 – Procedural Harmonisation Task 3.1: Assessment of procedures

11 FixO3 PAP Delayed-Mode Processing Stream 1 Decode from download format eg SBEDataProcessing Create OceanSITES post-deployment files 2 PIs for each data type apply calibration coefficients and assess quality 3 Generate graphs for website Create OceanSITES v1.3 Delayed-mode file and place on FTP Pass data to British Oceanographic Data Centre BODC ftp://ftp.ifremer.fr/ifremer/oceansites/DATA/PAP/ ftp://data.ndbc.noaa.gov/data/oceansites/DATA/PAP/ http://www.emodnet-physics.eu http://emecodata.net/ noc.ac.uk/pap/data www.seadatanet.org/Data-Access

12 FixO3 PAP Real-time Processing Stream C Decode from transmission format secure and share onto file system (C code) Perl Decode each sensor type write to MySQL tables visible on the internet Matlab QC and generate graphs for website Nightly create OceanSITES v1.3 file and place on FTP and ingested by OceanSITES and EMECO noc.ac.uk/pap/data ftp://ftp.ifremer.fr/ifremer/oceansites/DATA/PAP/ ftp://data.ndbc.noaa.gov/data/oceansites/DATA/PAP/ Global Telecommunications System http://www.emodnet-physics.eu http://www.emecodata.net/


Download ppt "Work Package 2 / 3 TECHNOLOGIAL & PROCEDURAL HARMONISATION FixO3 General Assembly 14 th to the 16 th October 2014, Heraklion-CRETE Maureen Pagnani, BODC/NOC,"

Similar presentations


Ads by Google