Presentation is loading. Please wait.

Presentation is loading. Please wait.

THE COOLING SYSTEM. Purpose To regulate the engines internal temperature To remove excess heat from the engine To provide heat to the passenger compartment.

Similar presentations


Presentation on theme: "THE COOLING SYSTEM. Purpose To regulate the engines internal temperature To remove excess heat from the engine To provide heat to the passenger compartment."— Presentation transcript:

1 THE COOLING SYSTEM

2 Purpose To regulate the engines internal temperature To remove excess heat from the engine To provide heat to the passenger compartment

3 The Water Pump Centrifugal-type, rotates faster than crank, up to 10,000 gal. per hour Pulley driven, belt, chain drive or direct drive

4 The Cooling Fan Provides air flow with vehicle stopped Provides increased air flow at low RPM or vehicle speeds Belt driven or Electric

5 Belt Driven Cooling Fan Clutch Limits actual fan speed no more than 2000 rpm Engaged at low speeds Disengaged at high speeds Thermostatic (temp. sensitive)

6 Flex Blade Fan Fan blades flatten out at high speeds, reducing noise, increasing horse power

7 Electric Cooling Fan Electric – 12v DC motor driven fan Controlled in several ways –Engine coolant temp (ECT) switch –A/C select switch –PCM controlled based on various inputs Fan turns on/off at specific temps.

8 Electro-Viscous Fan Clutch PCM Controlled fan speed Sensors monitored to control speed: –ECT, A/C request, VSS, IAT, Trans Fluid Temp, AAT Solenoid controls fluid flow, regulating fan speed Internal hall effect sensor monitors fan speed

9 The Radiator Transfers heat from coolant to the atmosphere Two types – Vertical & cross flow Aluminum, brass, copper core; brass, copper or plastic tanks Air movement through radiator created by a mechanical fan or by vehicle movement (ram air) dissipates heat

10 How a Radiator Works

11 Radiator Pressure Cap Regulates pressure in the cooling system Rated in psi – always replace with same rating Pressure valve – allows liquid or vapor to escape Vacuum valve – as system cools, coolant can reenter the system

12

13 The Thermostat Regulates engine coolant temperature Rated in degrees – 195 degrees most common Solid Expansion design – wax pellet expands as temp increases, valve begins opening at rating & is completely open within 20 degrees

14

15 Coolant Provides freeze & boil over protection, corrosion prevention & good heat transfer Ethylene Glycol based – recommended 50/50 mixture with water, poisonous Dex-Cool – used by GM, 5 year 150,000 mile protection, doesn’t contain silicate & phosphate additives

16 The Heater Core Small size radiator located in the dash, coolant circulates through it. A blower motor passes fresh air over it, heat transfers to the cooler air and into the cabin Many vans & SUV have rear heating units

17

18 OLD NEW

19 Overview


Download ppt "THE COOLING SYSTEM. Purpose To regulate the engines internal temperature To remove excess heat from the engine To provide heat to the passenger compartment."

Similar presentations


Ads by Google