1. SAE Brake Friction Materials Chemical Analysis Methodology Taskforce Update to BMC Greg Vyletel Meritor, Inc.

2. 2 Charter Propose the simplest analysis technique / methodology that can accurately and repeatedly quantify the targeted chemical species in brake friction materials

3. 3 Team Members Steve Bell, ABS Friction Dan Berard, Federal-Mogul Corporation Dr. Peter Filip – Southern Illinois University Stuart Magoon – Washington State Ecology Dr. Mark Phipps – Bosch Brake Components Dr. John Quinn – California DTSC Dr. Paul Sanders – Michigan Tech. University Chris Shepley – Affinia Ryan Vicary – ITT Motion Technologies Dr. Greg Vyletel – Meritor (Chair) Kevin Wolford – AMECA

4. 4 “Public Domain” Formulations 4 suppliers have submitted samples, 4 still pending Samples from one supplier have been prepared for analysis in cooperation with Washington Ecology California and Washington scheduled to have test results and feedback on methods by week 24 (Oregon has dropped out of testing) Outside laboratories will then be scheduled (2-4 weeks for results) Results will not be published until all laboratories data is received Materials (1-6) and laboratories (A-E) are both “blind”

5. 5 SAE J2975 - Measurement of Copper and other elements in Brake Friction Materials Sample Generation / Collection Process description and guidelines for sampling Sample Preparation Acid Digestion via EPA Method 3050B (Cu, Pb, Sb, Ni, Zn, Cr, Cd) Analysis Inductively Coupled Plasma – Atomic Emission Spectroscopy via EPA Method 6010C Note: Hex Cr, Hg and asbestiform fibers will follow other appropriate EPA methods

6. 6 Next Steps Results will be statistically analyzed and discussed among the taskforce Conduct necessary testing to verify any differences between suppliers Finalize and put up for ballot SAE J procedure Publish analytical results / methodology in “refereed” journal Explore establishment of NIST standard