1. 1 Cheetah-UTK collaboration Outline Potential topics for collaboration Cheetah goals with implications on network design CDN applications Collaboration with HOPI Three-domain network: UTK, Cheetah, HOPI Data plane Control plane Tao Li & Malathi Veeraraghavan University of Virginia May 3, 2007

2. Potential topics for UTK-Cheetah collaboration Applications CDN DVTS Control-plane Internetworking with cheetah control-plane solution Virtualizer For Force10 switches: need this to enable HOPI to serve as a testbed for simultaneous networking experiments

3. Proposed Three-Domain Network (UTK, Cheetah, HOPI)

4. 4 Cheetah goals Original goals: Support eScience applications primarily the Terascale Supernova Initiative (TSI) Connect scientist's cluster at NCSU to ORNL Cray TSI project is now complete 2007 refocus Design and demonstrate use of an internetworking architecture consisting of a core circuit-switched network with control-plane support for dynamic call-by-call bandwidth sharing with connectionless packet-switched regional/enterprise networks quantifiable benefits to applications

5. Motivation Bottom-up: Circuit switches, being position-based, are cheaper for higher-rate interfaces and larger switching capacities than packet switches Core network switches need higher link rates and switching capacities Therefore, use circuit switches in the core 5

6. Motivation contd. Today’s Internet & Internet2 do use circuit switches in the core e.g., OC192 links between Abilene routers traverse a SONET circuit-switched network However, circuits are provisioned; leased lines held for long durations (years); PVCs in ATM lingo For a network of circuit switches to qualify as a "network" as opposed to a set of "wires," bandwidth sharing must be implemented: Control-plane call-by-call sharing SVCs in ATM lingo. 6

7. Top-down motivation Are there any applications for a "core" circuit- switched network with SVC capability? Without these, it is a technology-driven solution without a problem Technology: control-plane protocols Data-plane aspect of circuit switches already in use in the form of PVCs 7

8. Applications for circuit-switched networks with SVC capability eScience applications: focus is on providing high-bandwidth per call circuit/virtual circuit (VC) capability required enterprise-to- enterprise, not just in the core network General file-transfer applications: need to focus on mode of bandwidth sharing due to scale request and obtain dedicated bandwidth and use temporarily in contrast with TCP bandwidth sharing on connectionless packet-switched networks, where the amount of bandwidth a flow receives can vary within a flow's duration has value even if the circuit/VC is just a core network

9. Host Packet switch Packet switch Enterprise/regional Internetworking architecture for connectionless packet-switched enterprise/regional networks and core circuit-switched network with SVC capability e.g. roadways network e.g. airport e.g. airlines network Core network e.g. roadways network Host Packet switch Packet switch Enterprise/regional Circuit switch Circuit switch e.g. airport Key point: gateways need to be connection-oriented packet switches Analogy: Airline passenger calls ahead, makes reservation for flight before driving on roadways network to reach the airport (gateway) Gateway Call ahead before sending flow that needs its own circuit

10. Explanation If gateways are IP routers, and they are operated in connectionless mode (which means no "connection setup" phase prior to data transfer), there is no simple solution to trigger SVC set up and teardown Hence PVC usage of core circuit-switched network IP-over-ATM efforts suggested automatic flow classification: if X packets for a flow are detected in Y sec, assume it is a long-lived flow and initiate SVC setup Didn't work. Why?  Technology problem: guessing game to identify long-lived flows  More importantly: no value  End-to-end bandwidth sharing is still TCP based

11. What is a "connection-oriented" gateway? Example: squid web proxy (caching) server When http request arrives, think of it as as a data-plane packet with an implicit signaling call setup request If web proxy's secondary NIC (into the circuit- switched) network is tied up in circuits to other web proxy servers distinct from the one identified as best parent for this request, call is effectively rejected Falls back to primary NIC path and uses connectionless IP path between squid servers

12. Is there any value? Clear value to the service provider Cheaper circuit switches at higher rates implies cheaper core-network connectivity services Pass some of the savings to users Value to the user: Different mode of bandwidth sharing Allows for user to pay for and obtain differentiated services on a per-flow basis Pricing model can capture temporal fairness

13. Implications of goals on network design Data-plane: Circuit granularity should be moderate/small, e.g., OC1 Control-plane Fast call setup delay: if 1-sec call setup delay, holding time should be at least n times this number, e.g., n=10. Call handling throughput should be high e.g., 160Gbps switching capacity; per-call rate: 300Mbps; number of concurrent calls = 533 if call holding time = 10 sec, switch controller should handle 53 calls/sec Distributed call controller

14. Control-plane implications of goals General-purpose file transfer applications Moderate bandwidth per call Short call holding times Control-plane solution only needs to support immediate- request mode of bandwidth sharing eScience applications High bandwidth per call Long (hours) holding time Control-plane solution should support book-ahead mode of bandwidth sharing

15. 15 Book-ahead (BA) vs. immediate request (IR) modes of bandwidth sharing Call blocking probability is low when m is high; IR mode works Mean waiting time is proportional to mean call holding time Can afford to use IR mode when m is small if calls are short Implement some form of call queueuing But if circuit rates are high and holding times are large, need to support book-ahead mode Large m Moderate-rate circuits Small m Short callsLong calls Bank tellerDoctor's office High-rate circuits immediate-request book-ahead m is the link capacity expressed in channels e.g., if 1Gbps circuits are assigned on a 10Gbps link, m = 10 Bandwidth sharing modes

16. 16 Examples representative of the two classes of applications Applications Metric Video telephony (IR application) Video conferencing (BA application) Call arrival rateHigh (many endpoints) Low (one or two endpoints per enterprise) Call holding timeShort (~3 mins)Long (~1 hr) Bandwidth required per call LowHigher Mode of requestImmediate usageCan plan ahead and reserve bandwidth

17. 17 Outline check Outline Potential topics for collaboration Cheetah goals with implications on network design  CDN applications Collaboration with HOPI Three-domain network Data plane Control plane

18. 18 Open-source CDN software OpenCDN Globule CDN CoralCDN CoDeeN

19. 19 OpenCDN OpenCDN is an application-level content delivery network (CDN), suitable for live and recorded multimedia content distribution Creates an application-level multicast-relay tree because IP multicast routing is not widely enabled in routers Architecture: Data-plane: A tree of streaming servers forming a chain from origin server to client; New clients join the tree at closest server Control-plane: Request Routing and Distribution Manager (RRDM) origin and relay nodes register their streaming protocol capabilities relay nodes registers the IP address space they are willing to serve Currently supported streaming servers: Darwin Streaming Server by Apple Helix Universal Server by Real

20. Architecture Portal : Web site that shows meta data for the content stored on origin servers available for streaming. Nodes  Relay servers; Runs streaming clients on one side and servers on the other side

21. 21 Fit of OpenCDN with Cheetah Is Cheetah appropriate to carry concatenated streams of data with relay nodes located at the Cheetah PoPs? Circuit granularity: OC1 too high for one stream Could set up one OC1 between two relay nodes and carry multiple streams across this OC1 Holding time: Could be large, for popular TV stations, if held "all-the-time" leased circuits are better Alternative solution: Use file transfers to copy video files between origin nodes and CDN servers at Cheetah PoPs Add streaming servers to the CDN servers for serving local clients Keep the RRDM registration and software for identifying ideal relay node for client. Relay  CDN server

22. 22 Globule CDN Globule is a collaborative content delivery network, where content providers (origins) share each other’s server resources (an enterprise uses another enterprise's servers as replicas) in contrast to using a commercial CDN service Each origin server maintains some backup servers and some replica servers Clients are redirected to their closest replica servers using a redirector (http or DNS) Need to upgrade Apache Web Server with a Globule module

23. 23 Fit of Globule CDN with Cheetah Deploy replica servers at Cheetah PoPs Use Cheetah for copying files between replica servers if origin server is on enterprise/regional network after initial copy from origin server to closest replica server between origin server and replicas if the origin server is itself located at a PoP Are the updates to replicas automatic? If pre-configured, what criteria are used to determine which replica servers to use? Paper mentions that only partial copies are maintained in replicas See IEEE Comm. Mag. Aug. 2006 paper

24. Akamai model Steps in looking up a URL when a CDN is used. Courtesy: Tanenbaum's Fourth Edition slides from Prentice Hall

25. Content Delivery Networks (a) Original Web page. (b) Same page after transformation. Courtesy: Tanenbaum's Fourth Edition slides from Prentice Hall

26. DNS or http redirection HTTP supports a Location header, which can be included in the response with the URL of the CDN server to which the http request is redirected DNS redirection: appears that the DNS server serving the origin server needs to be modified to provide the IP address of an appropriate CDN server based on the client location Which is appropriate for our deployment? See our goals for deploying applications Understand sclabaility of call-by-call dynamic bandwidth sharing Need to sign on web servers for this application unlike in squid where we need to sign on web clients

27. 27 Outline check Outline Potential topics for collaboration Cheetah goals with implications on network design CDN applications  Collaboration with HOPI Applications Control-plane Virtualizer Three-domain network Data plane Control plane

28. 28 Application testing Applications Selected to show-case advantages of high-speed dedicated virtual circuits (VCs) between PCs located at HOPI PoPs Mostly file transfer applications Examples: Web proxy (caching) servers: allows users not directly connected to HOPI to nevertheless use it (use HOPI VCs for inter-proxy file transfers) CDN and web mirroring: locate these servers at HOPI PoPs, and use VCs for file movement between CDN servers/mirrors IPTV: move video files between IPTV servers located at PoPs that serve local audiences Email servers: SMTP-to-SMTP server file transfers Storage and disaster recovery CDN: Content Delivery network; SMTP: Simple Mail Transfer Protocol

29. 29 Process for application testing End hosts on which to run applications: Use existing "support" PCs at HOPI PoPs, or Collocate UVa-provided PCs at HOPI PoPs Obtain virtual circuits from HOPI TSC as required for the experiments, and run tests Goal of deploying applications: Actively solicit and sign-on users Need to generate sufficient traffic to understand bandwidth sharing aspects of circuit-switched network Quite different from running bbcp on two servers in an experiment to obtain throughput of one flow

30. 30 Control-plane testing Cheetah Control-Plane Module (CCPM) Implements distributed bandwidth management One CCPM per HOPI Force10 switch to manage the bandwidth for all the interfaces on that particular switch Dynamic virtual-circuit service for calls with  high call arrival rates  short durations  moderate bandwidth  immediate-request type

31. Virtualizing HOPI PCs and Force10 switches Virtualizing PCs: Invite contributions of PCs from researchers, to locate at HOPI PoPs Slice these PCs and offer usage to the whole community Virtual Force10 switch To support multiple control-plane and management-plane projects

32. 32 Outline check Outline Potential topics for collaboration Cheetah goals with implications on network design CDN applications Collaboration with HOPI Applications Control-plane Virtualizer  Three-domain network Data plane Control plane

33. Proposed HOPI-CHEETAH-UTK Three- Domain Network: Data plane

34. Cheetah control-plane solution Developed a software program called circuit- requestor for CHEETAH end hosts Use built-in GMPLS control-plane software in Sycamore switch controllers Current solution: supports only port-mapped GbE-STS3-7v-GbE circuits Planned upgrades: support VLAN mapped to sub-Gbps SONET circuits

35. Based on the RSVP-TE code from KOM/DRAGON About 40K lines of C++ code What we changed: Modified the code to inter-operate with the Sycamore SN16000 Added admission control, session management, user interface, etc. Integrated code for DNS lookup from our partner CUNY Designed and implemented APIs for general applications About 4K lines of new code CHEETAH architecture Application DNS client RSVP-TE module TCP/IP C-TCP/IP NIC 1 NIC 2 End Host CHEETAH software Internet SONET circuit- switched network Circuit Gateway Circuit Gateway Application DNS client RSVP-TE module TCP/IP C-TCP/IP NIC 1 NIC 2 End Host CHEETAH software

36. CHEETAH end-host software – includes circuit-requestor + daemons DNS client RSVPD API DNS server RSVP-TE Daemon (RSVPD) DNS lookup CHEETAH Daemon (CD) socket Application CD API socket User space Kernel space C-TCP C-TCP API End host Circuit-requestor RSVP-TE messages Steps: DNS lookup (to support our scalability goal) Circuit setup signaling procedure (RSVP-TE)

37. Cheetah control-plane solution Usage: User logins to a CHEETAH end host Option 1:  Uses circuit-requestor program to request the setup of a dedicated 1Gb/s Ethernet-SONET-Ethernet circuit to another CHEETAH end host  Runs application, such as file transfer  Uses circuit-requestor program to release circuit Option 2:  User starts file-transfer application and unbeknownst to the user, the software decides whether it is appropriate to use a circuit and if so, sets it up, transfers the file and releases the circuit

38. Circuit-requestor usage To setup a new circuit: circuit-requestor setup domain-name-of-called-host bandwidth [holding-time] Default holding-time: 10 mins Max holding time: 1 hour Limit call holding time for fair bandwidth sharing To renew an existing circuit: circuit-requestor renew session-id [new-holding-time] Release unused circuits if there is no renewal To release an existing circuit: circuit-requestor release session-id To check the status of the CHEETAH trunk: circuit-requestor status

39. Option 2 Modified squid software to have the squid server automatically initiate circuit setup when it receives an http request that requires it to obtain the file from another squid server (parent) located at cheetah/HOPI PoP Release circuit if less than 10 packets seen on secondary NIC with 60sec (ICP packets do appear between squid servers)

40. Measurements Circuit typeEnd-tend circuit setup delay (s) Processing delay for Path message(s) at sn16k-nc Processing delay for Resv message(s) at the sn16k-nc OC-10.1661030.0911190.008689 OC-30.1654500.0908520.008650 1Gb/s EoS1.6456731.5669320.008697 Round-trip signaling message propagation plus emission delay between sn16k-atl and sn16k- nc: 0.025s Signaling delays incurred in setting up a circuit between zelda1 and wuneng across the CHEETAH network.

41. Why the initial DNS lookup? Verify called end host is on CHEETAH network and to obtain MAC address of the second (CHEETAH) NIC Why is MAC address necessary? Need to program ARP table to avoid wide-area ARP lookups

42. IP and MAC addressing issues Our completed Control-Plane Network Design document describes Why we chose static public IP addresses for the second (CHEETAH) NICs at end hosts Choose addresses based on CHEETAH host’s location – i.e., allocate address from enterprise’s public IP address space allocation (e.g., UVA hosts: 128.143.x.x) Reason: Scalability Impact: After dedicated circuit is setup: far end NIC has IP address from a different subnet Default setting of IP routing table entries will indicate that such an address is only reachable through the default gateway

43. Our solution: automatically update IP routing and ARP tables Update IP routing and ARP tables at both end hosts as last step of circuit setup Analogous to switch fabric configuration Routing table update Add an entry indicating the remote host is directly reachable through the second (CHEETAH) NIC ARP table update Add an entry for the MAC address of the remote CHEETAH NIC

44. Addressing in the CHEETAH network Whether private and/or dynamic IP addresses can be assigned to the data-plane and control-plane interfaces in GMPLS networks? Data-plane Addresses Static  Need to be “called” by other clients Public  Globally unique  Scalable to multiple autonomous-systems  Private IP addresses sufficient if goal for CHEETAH is to create a small eScience network Control-plane Addresses Static  Configured in Traffic-Engineered (TE) link Public  Same scalability reason

45. Control-plane security IPsec based Use Juniper NS-5 devices on SN16000 control ports Use Openswam IPsec software on Linux end hosts IPsec tunnels created between primary NICs of hosts and NS-5 devices of switches IPsec tunnels created between switch NS-5 devices for switch-to-switch control-plane exchanges

46. CCPM for HOPI Force10 Apply same approach as in cheetah network Since Force10 does not have a built-in GMPLS control-plane, we implemented CCPM Run one CCPM per host