1. Chapter 10 Developing New Products
MR Marketing 2
Chapter 10 Developing New Products
MR2100
Marketing 2
4/21/2017
Prepared by Paul Tilley

2. In This chapter we will:
Learn Product oriented terms
Learn how to classify products
Define product “newness”
Learn about the contributing factors to a product’s success and a product’s failure.
Identify and learn the steps in the New Product Development Process.
4/21/2017

3. A Product is...
A good
a service
or an idea
4/21/2017

4. A Product Line vs. A Product Mix
A Product Line is a group of products that are closely related e.g.
Apple has Portable Music players (Ipods), Desktop Computers, Laptop Computers, a Tablet and phones (Iphones)
General Motors has the Chevy, Buick and Cadillac lines of vehicles.
A Product Mix is a combination of all of the product lines of a company. Bombardier offers a range of products from airplanes, to trains.
4/21/2017

5. Classifying Products
Products can be classified a number of ways. Two key ways are:
The Type of user. (Consumer or Industrial)
The Degree of tangibility of the product. (Can you touch it or not!)
4/21/2017

6. Classifying Consumer Goods
Convenience Goods - Goods that are available to the consumer almost everywhere, that are relatively low valued and bought with relatively high frequency - A can of Coke.
Shopping Goods - Goods that must be compared with other goods. Usually higher priced, higher risk goods - Clothes.
Speciality Goods - Goods that are unique, special and available in limited locations. Usually high priced prestigious goods - Tilley Hats
Unsought Goods - Goods that you had no intention on buying but bought anyway. Tend to be lower priced - All stores that surround mall food courts tend to sell “unsought” items.
4/21/2017

7. Classifying Industrial Goods
Production Goods - Raw materials used in the production process.
Support Goods - Supplies and services key to but not used directly in the production process:
Installations - factories
Accessory Equipment - tools and office equipment
Supplies - Paper
Services - Legal & tax
4/21/2017

8. What is a “New” Product? A product is considered new if:
MR Marketing 2
What is a “New” Product?
A product is considered new if:
it is new relative to existing products on the market.
It is new in legal terms ( e.g. it may have been around for years but just patented)
New from the company’s perspective – Honda started making pickup trucks, but the pickup truck itself is not a new vehicle concept – It does however constitute 40% of all vehicle sales in North America
New from the consumer perspective. (the product may have existed in some markets for some time but may be new to a given market. (
4/21/2017

9. Innovation of New Products
Continuous Innovation
new product but we use it in the same way
Dynamically Continuous Innovation -
This type of innovation entails an evolution in the product and its use. Very few changes in usage methods are required. Eg. If you can drive a modern vehicle you can also drive a vehicle from the 1940’s
Discontinuous Innovation -
Here new usage methods must be learned as the product changes. Eg. the use of DOS is different than the use of Windows. This is the more challenging method for consumers to learn and the riskier method for manufacturers to choose.
4/21/2017

10. Why New Products Fail in the Marketplace
Not enough potential buyers.
No real difference between the new product and existing products.
Poor product quality.
Not sold in enough places.
Poor timing in introducing the product.
4P’s not well executed.
4/21/2017

11. The New Product Process
What follows is an outline of the key sequence of steps necessary to help ensure a new products success when it is first introduced to the marketplace.
Before anything, a organization must be innovative and seek out new product ideas. (by being both proactive and reactive) Without this key element, none of of the following steps are relevant. (Six Sigma protocols)
4/21/2017

12. Step 1 - Idea Generation
Ideas for new products come about in a number of formal and informal ways. Key sources if ideas come from:
Customer suggestions
Employee/Co-Worker suggestions
Formal Research and Development (R&D)
Analyzing competitor’s products
4/21/2017
Prepared by Paul Tilley c 2004

13. Step 2 - Screening and Evaluation of New Products
Once new ideas have been generated, they must be assessed for their appropriateness and value.
This assessment can be either:
Internal Approach - using a formalized evaluation procedure.
External Approach - protesting the concept on focus groups & customers
4/21/2017

14. Step 3 - Business Analysis
Once a product or idea has made it through the initial assessment then an analysis of its financial feasibility is completed.
Key concerns at this level is, what features should it have? And considering this can it make money?
4/21/2017

15. Step 4 - Development
If a product idea makes it past the business analysis stage then initial development must take place.
This usually involves building Prototypes which are then evaluated for their functionality, ease of build and practicality.
4/21/2017

16. New Product Development in the real World:
See the Good: Summary of Boeing 787
First Flight The Boeing 787 Dreamliner
See the Bad: Delays and Production Problems
4/21/2017

17. Step 5 - Market Testing
Once the prototype is built it is market tested.
At this stage changes are made based on customer, supplier and manufacturers inputs.
Test marketing is a difficult stage because input may not be representative of the overall markets feelings, it is time and money consuming and plans can be revealed to the competition.
4/21/2017

18. Step 6 - Commercialization
Once a product has made it through the market testing stage it gets mass produced and sold commercially.
The time and expense getting to this stage is great and cost may be increased when some retailers charge for display space for the product (Slotting fee) . If the product does not sell as well as the product that occupied the shelf space previously the retailer often attempts to recoup the lost revenues in the from of a Failure Fee.
4/21/2017

19. Step 6 - Commercialization
MR Marketing 2
Step 6 - Commercialization
One way to speed up the road to commercialization of a complicated product is through Parallel Development.
With parallel development key components of the new product are designed, tested and built separately but simultaneously. Boeing does this by designing and building the new 787 jet liner ( while at the same time Roll Royce and Pratt & Witney design and build engines for the plane. Plane and engines are mated at the end of the process. See the Roll Royce Trent :
4/21/2017