1. Electrical Energy - Moving electrons in a path is electricity
Electrical Potential Difference (v) is measured in Volts
The rate of moving electric charges, Electric Current (I), is measured in Amperes
Resistance or opposition to the movement of the energy is called Resistance (R).

2. Circuits – 2 types Series circuits are the most simple.
One (1) path for the current to travel.
Contains an energy source, a path, and a load (something for it to do, like a lamp)

3. Circuits – 2 types
Parallel circuits provide more than one path for the current to travel.
Most circuits are parallel, since if one lamp goes out, the others can stay lit.

4. cause the light bulb to stop glowing?
Which switches, if opened, will
cause the light bulb to stop glowing? Q R
H. S
J. T
It is the only switch in series to both the battery and light.

5. USE THE FORMULA SHEET!! V = I R so, 9V = I x 2 ohms or 4.5 amps
What is the current in a copper wire that has a resistance of 2 ohms and is connected to a 9 volt electrical source?
A amp
B amps
C amps
D amps
V = I R so,
9V = I x 2 ohms or 4.5 amps