1. Identifying Appropriate Hardware
Chapter 2

2. Introduction This presentation covers: Choosing input devices
Choosing output devices
Choosing storage devices

3. Choosing Input Devices
Remember: Input devices allow external data to be entered into a system.
There are far too many input devices to list in this presentation...
This will cover some of the more common input devices.
Choosing an input device requires some thought:
What is your budget?
How much data do you need to input?
Can you afford to make simple mistakes?
etc

4. Keyboards There are 3 main types of keyboard:
QWERTY (the most popular)
Alphabetical
Dvorak

5. Keyboards Keyboards are useful for inputting small amounts of data.
If you were asked to record large amounts of data then a keyboard probably isn’t the most suitable:
Mistakes are often made
There are more efficient tools you could use

6. Concept Keyboards Concept keyboards allow you to create your own keys.
A sheet or overlay is placed over a pad.
Software is used to program the positions of your keys and assign values to them.
You will often find concept keyboards in super markets and fast food restaurants.
Next time you are in a shop or a petrol station take a look at the keyboard they use.

7. Mouse There are many types of pointing device.
The most common being a mouse.
Some use a roller ball to track movement whilst others use optical sensors.
Either way, a mouse needs a surface to operate on.

8. Other pointing devices
If space is limited then sometimes touch pads, joysticks or tracker balls are used.

9. Scanners
Scanners translate information into a format that computers can understand.
There are many forms:
Barcode
Optical Mark Reader (OMR)
Magnetic Card Reader
Flatbed Scanners
Magnetic Ink Character Recognition (MICR)

10. Graphic Tablets
It is very difficult to draw images on a computer using a mouse.
We have been taught to draw holding a pencil or a paint brush.
Graphic tablets provide a surface on which a user can draw directly into a system.
The tablet picks up movements on the pad and translates them to the screen.

11. Digitiser
Essentially, any device which converts an analogue signal to a digital one:
Digital Camera
Scanner
Graphics tablet
Vinyl to MP3 dock

12. Take Note:
There are many types of input devices which have not been covered:
Digital Camera
Touch Screen
Microphone
Switch
Sensor
Research these devices and focus on their purpose and ergonomic features.
Investigate the use of biometric devices as input devices. Describe the device and list their advantages and disadvantages. Give examples of where they might be used.

13. Take Note:
Why are keyboards not suitable for inputting large amounts of data?
What are the advantages of concept keyboards?
Describe a digitiser.
Describe two different types of scanner and give examples of where they should be used.
What is the most efficient input device for a newspaper reporter and why?

14. Choosing Output Devices
Remember: Output devices display the result of processed data to the user.
There are lots of output devices, some of which produce hard copies and some of which that produce electronic copies.
This presentation covers some of the more common ones.

15. Output devices
You are more than likely using a monitor to look at this presentation.
Some people may have a print out of it and others may be viewing it through a projector.
These are just some ways that the information in this presentation can be outputted to a user.
Blind users may have the information read out to them using a screen reader.

16. Monitors
A monitor can come in different sizes and each type has it’s own benefits and negatives.
Larger monitors tend to have higher resolutions (the number of pixels on a screen).
The more pixels a monitor can display the more a user can see.

17. Monitors CRT: LCD: These were the common monitors a few years ago.
They used Cathode Ray Tubes which blasted colour at a glass panel to produce a picture.
They tended to have very good image quality.
LCD:
Liquid Crystal Diodes have no flicker and can potentially be better to use than CRT monitors in terms of health.
They are lighter and smaller but the image quality isn’t as good.

18. Printers Printers produce hard copy output.
Three types of printer which are useful to know about include:
Dot Matrix
Ink Jet
Laser

19. Dot Matrix These are known as impact printers.
An ink ribbon would be placed in front of paper.
Little hammers hit the ribbon onto the paper which causes ink to transfer across.
Quality tends to be poor but the advantage is that you can use carbon copy paper to make multiple copies of a document.
They are often used for invoices and shop receipts.

20. Ink Jet Ink jet printers squirt ink at the paper.
They are quite cheap to run as the only part which needs replacing is the ink cartridge.
The quality is better than dot matrix but they use more ink than laser printers.
They are cheaper to buy than laser printers but cost more in the long run.

21. Laser
These are high resolution printers that are very cost effective over time.
They work through a process of firing laser beams at a rotating drum which creates an electrical charge which in turn attracts the toner onto the drum.
Charged paper is then passed around the drum which transfers the toner to the paper.
Heat is then applied to set the toner.

22. Take Note: Complete the following table:
There are other types of printer. Research the following types:
Daisy wheel
Line
Thermal
Printer
Description
Advantages
Disadvantages
Dot-Matrix
Ink-Jet
Laser

23. Choosing a printer You should consider the following: How much output?
What speed is needed
Is heavy-duty equipment needed
Quality of output needed?
Letter quality
Near Letter quality
Draft
Location of printer?
Is noise level important
How much space do you have?
Multiple copies needed?
Colour print required?

24. Plotters There are two types of plotter to know about: Flat bed:
The paper lies flat and a pen moves across it in multiple directions.
Drum plotter:
Paper is stored as a roll of paper. As it unrolls a pen moves across it at right angles.

25. Take Note: Research into the following output devices:
Loud Speaker
Lights
For each, describe their purpose and provide and provide a suitable example of their use.
Research how a modem can be both an input and an output device.
Describe three criteria you should consider when buying a printer.

26. Take Note:
Identify two differences between a dot matrix and a laser printer.
Describe a monitor.
Describe two different types of plotter, noting the advantages and disadvantages of each.
Who might use the following device and how might they use them:
24” monitor
Flat-bed plotter
Colour laser printer
Loudspeaker
Is a CD-writer an output device? Give reasons for your view.

27. Choosing Storage Devices
Storage devices are used to store data an programs.
They are permanent forms of storage for data unlike RAM which doesn’t save data once a system is powered down.
Volatile memory – data is not kept permanently
Non-volatile memory – data is kept permanently.

28. Choosing Storage Devices
Storage capacity is measured in bytes.
Different storage devices have different storage capacities.
You need to choose a storage device which is suitable to your data storage needs.
Kilobyte (kB)
1024 bytes
Megabyte (MB)
1024 kilobytes
Gigabyte (GB)
1024 megabytes
Terabyte (TB)
1024 gigabytes

29. Floppy Disk Write-protect tab (open=protected) Hub Shutter
Plastic Housing
Paper Ring
Magnetic Disk
Disk Sector

30. Floppy Disk
These used to be the most common form of transferring data from one computer to another. They had a storage capacity of 1.44MB. They contained a floppy magnetic disk which used to wear out fairly quickly as the read/write needle used to have to be in contact with the actual disk. Modern storage devices (such as USB pen drives) are larger in capacity and lack moving parts which means they last longer.

31. Hard Disks
Hard disks are the main storage device for most computer systems.
Early hard drives used to be very large but hold a very small amount of data.
Modern hard disks can store terabytes of data.
They work similarly to floppy disks but contain more disks which can be written to from both sides.

32. Optical Disks Optical Disks (similar to CDs) are read only memory.
They hold about 700MB of data.
They are written to and read from using a laser which passes over sectors on a CD.
Some CDs are write once whilst others are re-writable.

33. DVD A CD has one layer to write to. A DVD has many layers to write to.
The average storage size is 4.7GB.
They are great for storing large files, which is why they are used for films and as backup mediums.

34. Tape Drive Tapes are excellent at storing large quantities of data.
They aren’t very good for reading from because data is stored serially.
This means that to find a file you have to start at the beginning of the tape and play it until you get to the data you require.
Unlike CD’s which have table of contents and can be read from very quickly because a laser can move to the correct position and read from sectors.
They are often used for backing up large amounts of data such as on a server.

35. Memory Stick
These have replaced the floppy disk and now are very common.
They have a large storage capacity for their size and work very quickly.
They are more robust than a floppy disk due to the hard shell and lack of moving parts.

36. Take Note: Media Description Use Capacity Transfer Speed
Cost per Megabyte
Floppy Disk
Hard Disk CD
DVD
Tape
USB Stick
Complete the following table.
Once you have done that....
Describe five characteristics that you should be looking for in order to make a comparison between devices when choosing a storage device.

37. Take Note: Describe the different types of CD and explain their uses.
Describe three different criteria to be used to compare memory sticks.
What is a tape suitable to use for backing up data?
How is a removable hard disk different from a portable hard disk?