1. QUALITATIVE CHEMICAL ANALYSIS

2. Qualitative vs. Quantitative A qualitative characteristic is a description of something that does not involve numbers or units of measurement. If number and units are used then we are using a quantitative method of describing the object. How could you describe a fire truck both qualitatively and quantitatively? How could you describe a substance both qualitatively and quantitatively?

3. CHEMISTRY CSI You can use the solubility rules to determine the presence of certain ions in a solution by conducting double displacement reactions. All you need to do is mix your water sample that contains the suspected ion with a solution that contains the ions that form a precipitate with your suspect ion.

4. EXAMPLE 1 Lets say you suspect your water sample has acetate in it. What could you do? If you combine your water sample with a solution that contains silver ions (Ag + ) then you can detect the presence of acetate because silver acetate will form which is insoluble – meaning it will form a precipitate. Ag + (aq) + C 2 H 3 O 2 - (aq)  AgC 2 H 3 O 2 (s)

5. THE BIG PROBLEM The major issue that has to be dealt with is that most solutions or samples contain more than one type of ion so chemists must design test procedures to identify and remove any suspected ions one at a time… You need to find a solution that will react (form a precipitate) with only one of the ions at a time.

6. EXAMPLE 2 Lets say we suspect a solution has both iron (Fe 2+ ) and strontium (Sr 2+ ) ions in it. Solubility rules say that hydroxide ions (OH - ) will react with the iron ions (Fe 2+ ) and form a precipitate but will not have the same reaction with strontium ions. So we can simply add a solution of sodium hydroxide (NaOH). This will dissociate and the hydroxide ions (OH - ) will form a precipitate with the iron ions (Fe 2+ ) in the solution. Fe 2+ (aq) + OH - (aq)  Fe(OH) 2(s)

7. EXAMPLE 2…Part 2 To remove the iron out of the solution we will centrifuge the solution with the precipitate. The rapid spinning will force the more dense precipitate to the bottom of the test tube and the liquid with the strontium ions in it will remain on top. The solution containing the strontium ions is called the supernate. We keep this for further testing.

8. EXAMPLE 2…Part 3 Now we have the supernate with the strontium ions in it…how do we test for the strontium ions? Sulfates (SO 4 2- ) will form precipitates with strontium…so we need to add an aqueous solution that contains sulfate ions…like sodium sulfate (Na 2 SO 4 ). The precipitate that forms will contain the precipitate called strontium sulfate. Sr 2+ (aq) + SO 4 2- (aq)  SrSO 4 (s)

9. That’s All I Got