1. Department of the Environment The State Implementation Plan Process – Our Next Steps Brian Hug Division Chief, Air Quality Planning and Policy Division Air Quality Planning and Monitoring Program

2. Maryland’s Air Quality We have problems with long term ozone exposure Fine particulate levels are generally very close to the federal standard Regional Haze issues Air pollution contributes significantly to Bay pollution

3. A Quick Primer on How Ground Level Ozone is Formed

4. Maryland’s 8-Hour Ozone NAA’s Baltimore Region Washington County EAC Cecil County (Part of Phil. NAA) Kent and Queen Anne’s County Region Washington DC Region

5. What is Fine Particulate Matter? Particulate matter, or PM, is the term for particles found in the air, including dust, dirt, soot, smoke, and liquid droplets. These small particles can be suspended in the air for long periods of time. Some particles are large or dark enough to be seen as soot or smoke. Others are so small that individually they can only be detected with an electron microscope.

6. Why is PM2.5 different from ozone? Source: EPA

7. What do our PM2.5 nonattainment areas look like? Baltimore Region Washington Region Washington County Nonattainment Area

8. The Role of Pollution Transport New science now confirms that a large mass of ozone covers our region and float in mass from one state to the next over large parts of the East MDE/University of Maryland airplanes routinely measure the “incoming” ozone cloud at 100 to 110 parts per billion (ppb) –New standard = 85 ppb On any given day, well over half of MD’s ozone originates in upwind states. –On some days the upwind contribution may be 70% or more

9. What is a SIP? A nice neat report A large file of information Filing cabinets full of documentation All of the above Multiple Choice:

10. 2005 – A Transition Period Ozone  1-hour standard recently revoked  Planning for the 8-hour standard has been initiated Fine Particulate Matter (PM fine or PM 2.5)  Slightly behind the 8-hour ozone standard, but planning process begins this year Regional Haze  Clearly linked to PM fine, but with slightly different planning requirements Other SIP pollutants  Nitrogen Dioxide, Sulfur Dioxide, Carbon Monoxide, Lead

11. Key Dates - Ozone April 2004 –EPA finalizes designations for new 8-hour ozone nonattainment areas –Becomes effective on June 15, 2004 June 2005 – 1-hour standard revoked Fall/ Winter 2005(?) – EPA issues final pieces of regulatory guidance for implementing the new ozone standard June 2007 – SIPS due –Modeling, Demonstrations, Control Programs, more later June 2010 – Attainment date for moderate areas –Summer of 2009 becomes very important

12. Key Dates – PM Fine and Haze December 2004 – EPA finalizes designations for PM fine standard (effective April 5, 2005) PM fine designations trigger Regional Haze planning requirements Fall/ Winter 2005(?) – EPA issues draft regulatory guidance for implementing new PM fine standard (final in 2006?) April 5, 2008 SIPS due –Modeling –Demonstrations (other corroborating evidence) –Control programs Early 2010 - Attainment date for PM fine nonattainment areas

13. Technical Work Monitoring –Monitoring for ozone, PM fine and regional haze –Driven by regulatory requirements, but also plays an important role in public outreach efforts –An area is designated nonattainment if it consistently measures air quality with concentrations of one of the criteria pollutants greater than the national standards –Attainment of a standard is based on several years of monitored air quality measurements

14. Inventories –For ozone, PM fine and Regional Haze Direct and indirect/precursor emissions –Used to quantify the sources and extent of emissions in an area –Provide a baseline from which reductions may be measured –Used in the modeling demonstration Need inventories from other states Technical Work (2)

15. Air Quality Modeling –Ozone, PM fine and regional Haze –A number of air quality models are used to predict the air quality benefits resulting from emission reduction strategies “Screening” models and regulatory models –“Grounded” with monitored data –Modeling “domains” now cover most of the U.S. A very large regional process Technical Work (3)

16. Basic Requirements SIPS are due in 2007/2008 Must include: –Control programs/regulations –An attainment demonstration Modeling or other technical analysis that shows control programs will reduce emissions enough to meet standards in 2010 –A Rate-of-Progress (ROP) demonstration Demonstration that control programs will reduce emissions by specific increments (I.e. 3% per year) over time –Maintenance Plan Once an area has demonstrated three years of air quality that meets a NAAQS, it is required to ensure that the area will continue to meet the standard into the future (allowing for growth) –Numerous other SIP elements

17. Timeline

18. Thanks….. Brian Hug Air Quality Planning and Monitoring Program 410-537-4125