1. Andy Blue Glasgow Update

2. Andy Blue WP3 Meeting UV Glue In November, I sent UV Glue, hybrid panel + jig to Anglo Production Process LTD –UK supplier of UV Glue valve for machine we have in Glasgow Wanted to see if machine we have could perform UV glue work with proposed new UV Valve Received results last week –Damage to glue machine delayed trials –They said UV Glue had cured Strange as glue was covered in tin foil and had been since arrival from DESY Used Humiseal UV Cure Acrylic Gel

3. Andy Blue WP3 Meeting UV Glue Platform ModelX1022 Axiom ValveEFD741 Dispense Station HeatN/A Parameters ValveEFD741 MaterialHumiseal Acrylic Gel NozzlePurple EFD Nozzle Nozzle TemperatureAmbient Fluid Pressure10.0 psi Valve PressureN/A Settling time0 Down Speed50mm/sec Down Acceleration7620 mm/sec2 Dispense Gap0.4mm Dwell0.003 Retract Speed50mm/sec Retract Acceleration7620mm/sec2 Retract Distance5.0mm

4. Andy Blue WP3 Meeting Questions How comparable is this glue to the ones we would use? Cost –New Valve + software upgrade = £4.4k –Craig aka Pixels willing to pay half of this cost

5. Andy Blue WP3 Meeting Shopping list Pt 2 I really don’t have any type of visual inspection system for strip gluing/wire bond checking etc. –High powered microscope –BATY system Was looking at Mikkrolite II from Vision Systems Guide price for the console version is £3,633 PC version (with pc) is approximately £5,400

6. Andy Blue WP3 Meeting Parts & Components Is there possibility we could get parts to trial wire bonding/gluing in the near future? –Quite keen to get as much experience as early as possible –Any use in wire bonding ABC130s to new hybrid panels? –Is there a plan for dummy modules for sensor wire bonding trials?