1. © 2014 Cisco and Bob Vachon All rights reserved. 1 Chapter 1: Introduction to Switched Networks Switched Networks

2. © 2014 Cisco and Bob Vachon All rights reserved. 2 Chapter 1  1.1 LAN Design  1.2 The Switched Environment

3. © 2014 Cisco and Bob Vachon All rights reserved. 3 Chapter 1: Objectives  Describe the convergence of data, voice, and video in the context of switched networks.  Describe a switched network in a small-to-medium-sized business.  Explain the process of frame forwarding in a switched network.  Compare a collision domain to a broadcast domain.

4. © 2014 Cisco and Bob Vachon All rights reserved. 4 LAN Design

5. © 2014 Cisco and Bob Vachon All rights reserved. 5 Legacy Telephone Equipment

6. © 2014 Cisco and Bob Vachon All rights reserved. 6 Separate Networks Voice Network Video Network Data Network

7. © 2014 Cisco and Bob Vachon All rights reserved. 7 Converged Networks  Convergence combines voice and video communications on a data network.  The impact of moving a conventional company architecture to a completely converged network creates a shared infrastructure resulting in a single network to manage.  A primary benefit of a converged network is that there is just one physical network to install and manage. Results in substantial savings over the installation and management of separate voice, video, and data networks.

8. © 2014 Cisco and Bob Vachon All rights reserved. 8 Converged Networks  To support collaboration, business networks employ converged solutions using voice systems, IP phones, voice gateways, video support, and video conferencing.

9. © 2014 Cisco and Bob Vachon All rights reserved. 9 Converged Networks  The convergence of services onto the data network has resulted in an evolution in networks.  It’s gone from a traditional data transport role, to a super- highway for data, voice, and video communication.  Therefore, the converged network must be properly designed and implemented to allow the reliable handling of the various types of information that it must carry. A structured design is required to allow management of this complex environment.

10. © 2014 Cisco and Bob Vachon All rights reserved. 10 Borderless Networks  The Cisco Borderless Network provides an architectural approach that embeds intelligence, simplifies operations, and is scalable to meet demands of the converged network.  It can connect anyone, anywhere, anytime, on any device - securely, reliably, and seamlessly.  It provides the framework to unify wired and wireless access across many different device types.

11. © 2014 Cisco and Bob Vachon All rights reserved. 11 Borderless Networks  Borderless networks are built using following principles:  These are not independent principles, therefore, understanding how each principle fits in the context of the others is critical. Network Design Principles Explanation Hierarchy Facilitates understanding the role of each device at every tier, simplifies deployment, operation, and management, and reduces fault domains at every tier. Modularity Allows seamless network expansion and integrated service enablement on an on-demand basis. Resiliency Satisfies user expectations by keeping the network operational. Flexibility Allows intelligent traffic load sharing by using all network resources.

12. © 2014 Cisco and Bob Vachon All rights reserved. 12 Borderless Networks  Designing a borderless switched network in a hierarchical fashion allows network designers to overlay security, mobility, and unified communication features.  There are two time-tested and proven hierarchical design frameworks for campus networks. Three-tier hierarchical modelTwo-tier hierarchical model

13. © 2014 Cisco and Bob Vachon All rights reserved. 13 Borderless Networks  Introducing modularity into the campus hierarchical design further ensures that the campus network remains resilient and flexible enough to provide critical network services.  Modularity also helps to allow for growth and changes that occur over time.

14. © 2014 Cisco and Bob Vachon All rights reserved. 14 Switched Networks

15. © 2014 Cisco and Bob Vachon All rights reserved. 15 Role of Switched Networks  Switched networks incorporate the following features: Layer 3 functionality Quality of service IP telephony Security Wireless networking Mobility  Meeting the requirements of next generation networks: Secure Reliable and always available Support converged network traffic such as data, voice, video, security systems, and more

16. © 2014 Cisco and Bob Vachon All rights reserved. 16 Switch Considerations  There are various types of enterprise switches and the following are features to consider when selecting them. ConsiderationExplanation Cost Cost of a switch depends on the number and speed of the interfaces, supported features, and expansion capability. Port Density Network switches must support the appropriate number of devices on the network. Power Some switches support Power over Ethernet (PoE). Some chassis-based switches support redundant power supplies. Reliability Switch should provide continuous access to the network. Port Speed Speed of the network connection. Frame Buffers Switch should be able to store frames for congested ports. Scalability Switch should provide the opportunity for growth

17. © 2014 Cisco and Bob Vachon All rights reserved. 17 Switch Form Factor  Switch form factor refers to the type of switch and the thickness of it when mounted in a rack.  The thickness of the switch is expressed in number of rack units (e.g., 1U, 2U, ….).  Network designers must choose between: Fixed configuration switch Modular configuration switch Stackable or non-stackable switch

18. © 2014 Cisco and Bob Vachon All rights reserved. 18 Fixed Configuration Switches  Fixed configuration switches are basically “what you see is what you get” and they do not support features or options beyond those that originally came with it. 1U

19. © 2014 Cisco and Bob Vachon All rights reserved. 19 Modular Switches  Modular configuration switches are more flexible and typically come with different sized chassis supporting various modular line cards that fit into the switch chassis.

20. © 2014 Cisco and Bob Vachon All rights reserved. 20 Stackable Switches  These switches can be interconnected using a special cable. They can be daisy-chained and effectively managed as one large switch using the Cisco StackWise technology.

21. © 2014 Cisco and Bob Vachon All rights reserved. 21 L2 and L3 Switches  Switches are also identified as either: Layer 2 Layer 3 (or multilayer switch)  L3 switches are typically deployed in the core and distribution layers of an organization's switched network. They can build a routing table, support a few routing protocols, and forward IP packets at a rate close to that of Layer 2 forwarding. Multilayer switches often support specialized hardware, such as application-specific integrated circuits (ASICs).

22. © 2014 Cisco and Bob Vachon All rights reserved. 22 L2 and L3 Switches  There is a trend in networking toward a pure Layer 3 switched environment. Access layer switches are usually L2 switches.  Most switches now support routing and it is likely that soon all switches will incorporate a route processor because the cost of doing so is decreasing relative to other constraints. Eventually the term multilayer switch will be redundant.

23. © 2014 Cisco and Bob Vachon All rights reserved. 23 Enterprise Level Switches  Characteristics of enterprise level switches include: Port Density High Forwarding Rates Support for Link Aggregation Supports higher throughput by combining multiple switch ports

24. © 2014 Cisco and Bob Vachon All rights reserved. 24 Port Density  This is the number of ports available on a single switch.  Remember, some of these ports will be used to interconnect the switch to the rest of the network!

25. © 2014 Cisco and Bob Vachon All rights reserved. 25 Forwarding Rate  Defines the processing capabilities of a switch by rating how much data the switch can process per second. Switch product lines are classified by forwarding rates. Entry-layer switches have lower forwarding rates than enterprise-layer switches.

26. © 2014 Cisco and Bob Vachon All rights reserved. 26 Forwarding Rate  Wire speed describes the theoretical maximum data transmission rate that each port on the switch is capable of attaining Because access layer switches are physically limited by their uplinks to the distribution layer they don’t need to operate at full wire speed.  Therefore use: Less expensive, lower performing switches at the access layer More expensive, higher performing switches at the distribution and core layers where forwarding rate makes a bigger impact.

27. © 2014 Cisco and Bob Vachon All rights reserved. 27 Link Aggregation  Are there enough ports on a switch to aggregate to support the required bandwidth?  A 24-port switch, with each port capable of running at gigabit speed could generate up to 24 Gb/s of network traffic. What if this switch is connected to the network with one 1 Gbps link? Bandwidth contention would occur. Each port would get 1/24 th of the available wire speed. Data would be forwarded more slowly.

28. © 2014 Cisco and Bob Vachon All rights reserved. 28 Link Aggregation  Link aggregation helps reduce traffic bottlenecks by allowing up to 8 switch ports to be bound together for data communications. Link aggregation supports higher throughput by combining multiple switch ports.

29. © 2014 Cisco and Bob Vachon All rights reserved. 29 Power over Ethernet (PoE)  Allows the switch to deliver power to a device over the existing Ethernet cabling. Can provide power to IP phones and wireless access points.

30. © 2014 Cisco and Bob Vachon All rights reserved. 30 PoE Pass-Through Switches  Some switches such as the Cisco Catalyst 2960-C and 3560- C Series compact switches support PoE pass-through.  PoE pass-through allows a network administrator to power PoE devices connected to the switch, as well as the switch itself, by drawing power from certain upstream switches.

31. © 2014 Cisco and Bob Vachon All rights reserved. 31 Enterprise Switches  There is no one switch to “switch them all”.  An enterprise would require the services of many different switches based on its function as a core, distribution, and access layer. Cisco Switches

32. © 2014 Cisco and Bob Vachon All rights reserved. 32 Access Layer Switches  Cisco Catalyst 2960 Series  Cisco Catalyst 2960 and 2960-C Series Compact Switches

33. © 2014 Cisco and Bob Vachon All rights reserved. 33 Catalyst 2960  Entry-layer enterprise, medium-sized, and branch office network switch  Forwarding rates from 16 Gb/s to 32 Gb/s  Multilayered switching  QoS features to support IP communications  Access control lists (ACLs)  Fast Ethernet and Gigabit Ethernet connectivity  Up to 48 10/100 ports or 10/100/1000 ports with additional dual purpose gigabit uplinks  No PoE support  CLI, Web management, Network Assistant, console, AUX access

34. © 2014 Cisco and Bob Vachon All rights reserved. 34 Catalyst 2960

35. © 2014 Cisco and Bob Vachon All rights reserved. 35 Distribution and Access Layer Switches  Cisco Catalyst 3560-X Series  Cisco Catalyst 3750-X Series  Cisco Catalyst 4500E Series

36. © 2014 Cisco and Bob Vachon All rights reserved. 36 Catalyst 3560  Enterprise-class switch supports PoE, QoS, and advanced security features (ACLs)  Small enterprise LAN access or branch-office converged network environments.  Different fixed configurations: Fast Ethernet and Gigabit Ethernet connectivity Up to 48 10/100/1000 ports, plus four small form-factor pluggable (SFP) ports Optional 10 Gigabit Ethernet connectivity in the Catalyst 3560-E models Optional Integrated PoE (Cisco pre-standard and IEEE 802.3af); up to 24 ports with 15.4 watts or 48 ports with 7.3 watts

37. © 2014 Cisco and Bob Vachon All rights reserved. 37 Catalyst 3560

38. © 2014 Cisco and Bob Vachon All rights reserved. 38 Catalyst 3750  Access layer switches in midsize organizations and enterprise branch offices Forwarding rates from 32 Gb/s to 128 Gb/s  Supports Cisco StackWise technology StackWise technology allows up to 9 switches to be interconnected via the use of a fully redundant backplane.  Different stackable fixed configurations: Fast Ethernet and Gigabit Ethernet connectivity Up to 48 10/100/1000 ports, plus four SFP ports Optional 10 Gigabit Ethernet connectivity in the Catalyst 3750-E models Optional Integrated PoE (Cisco pre-standard and IEEE 802.3af); up to 24 ports with 15.4 watts or 48 ports with 7.3 watts

39. © 2014 Cisco and Bob Vachon All rights reserved. 39 Catalyst 3750

40. © 2014 Cisco and Bob Vachon All rights reserved. 40 Catalyst 4500  Distribution Layer switch that provides multilayer switching for enterprises, small- to medium-sized businesses, and service providers. Forwarding rates up to 136 Gb/s  Different modular configurations: Modular 3, 6, 7, and 10 slot chassis offering different layers of scalability High port density: up to 384 Fast Ethernet or Gigabit Ethernet ports available in copper or fiber with 10 Gigabit uplinks PoE (Cisco pre-standard and IEEE 802.3af) Dual, hot-swappable internal AC or DC power supplies Advanced hardware-assisted IP routing capabilities

41. © 2014 Cisco and Bob Vachon All rights reserved. 41 Catalyst 4500

42. © 2014 Cisco and Bob Vachon All rights reserved. 42 Core and Distribution Layer Switches  Cisco Catalyst 6500 Series  Cisco Catalyst 4500E Series  Cisco Catalyst 4500-X Series  Cisco Catalyst 3750-X Series

43. © 2014 Cisco and Bob Vachon All rights reserved. 43 Catalyst 6500  Optimized for secure, converged voice, video, and data networks.  Can manage traffic at the distribution and core layers.  Highest performing Cisco switch Supports forwarding rates up to 720 Gb/s.  Very large network environments found in enterprises, medium-sized businesses, and service providers.

44. © 2014 Cisco and Bob Vachon All rights reserved. 44 Core Layer: Catalyst 6500

45. © 2014 Cisco and Bob Vachon All rights reserved. 45 Catalyst 6500  Different modular configurations: Modular 3, 4, 6, 9, and 13 slot chassis LAN/WAN service modules PoE up to 420 IEEE 802.3af Class 3 (15.4W) PoE devices Up to 1152 10/100 ports, 577 10/100/1000 ports, 410 SFP Gigabit Ethernet ports, or 64 10 Gigabit Ethernet ports Dual, hot-swappable internal AC or DC power supplies Advanced hardware-assisted IP routing capabilities

46. © 2014 Cisco and Bob Vachon All rights reserved. 46 The Switched Environment

47. © 2014 Cisco and Bob Vachon All rights reserved. 47 Switching as a General Concept  The fundamental concept of switching refers to a device making a decision based on two criteria: Ingress port Destination address  A LAN switch maintains a MAC Address Table that it uses to determine how to forward traffic through the switch

48. © 2014 Cisco and Bob Vachon All rights reserved. 48 Dynamically Populating a MAC Address Table  As the switch learns the relationship of ports to devices, it builds a table called a MAC address, or content addressable memory (CAM) table.

49. © 2014 Cisco and Bob Vachon All rights reserved. 49 Switch Forwarding Methods  Application-specific-integrated circuits (ASICs) reduce the packet-handling time, and allow the device to handle an increased number of ports without degrading performance.  Two Methods of forwarding frames: Store-and-Forward - makes a forwarding decision on a frame after it has received the entire frame and checked the frame for errors. Cut-Through - begins the forwarding process after the destination MAC address of an incoming frame and the egress port has been determined.  NOTE: Cisco switches now all use Store and Forward

50. © 2014 Cisco and Bob Vachon All rights reserved. 50 Selective Forwarding Cut-Through Lowest Latency No error checking FragmentFree Fragment Free Low Latency Checks for collisions (Filters most errors) StoreandForward Store-and-Forward Highest Latency All errors filtered Lowest LatencyHighest Latency Less Error CheckingMore Error Checking

51. © 2014 Cisco and Bob Vachon All rights reserved. 51 1.2.1.7

52. © 2014 Cisco and Bob Vachon All rights reserved. 52 Collision Domains  Each port on the switch represents a new segment.  Each new segment is a collision domain.

53. © 2014 Cisco and Bob Vachon All rights reserved. 53 Broadcast Domains  Switches do not filter broadcast frames therefore a collection of interconnected switches forms a single broadcast domain.  Routers are used to segment both collision and broadcast domains

54. © 2014 Cisco and Bob Vachon All rights reserved. 54 Alleviating Network Congestion  Characteristics of switches that contribute to alleviating network congestion: CharacteristicsExplanation High port density Large enterprise switches may support many hundreds of ports. Large frame buffers The ability to store many received frames. Port speed Depending on the cost of a switch, it may be possible to support a mixture of speeds. Ports of 100 Mb/s, and 1 or 10 Gb/s are common (100 Gb/s is also possible). Fast internal switching Having fast internal forwarding capabilities allows high performance. Low per-port cost Switches provide high-port density at a lower cost and can accommodate network designs featuring fewer users per segment, therefore, increasing the average available bandwidth per user.

55. © 2014 Cisco and Bob Vachon All rights reserved. 55