1. © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Importing Foreign Data and Maintaining Associativity Marilyn Tomlin CAE COE March 2009

2. Page 2 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Associativity for Imported Data 1.Create a new part 2.Import IGES/ProE/STEP data 3.Switch to Advanced Simulation and create and Idealized part, FEM and SIM. 4.Switch to the Idealized part.  Insert/Associated Copy/Wave Link  Select all bodies 5.In the FEM and SIM files, create the mesh, properties and boundary conditions. Solve the model. 6.SAVE ALL files. 7.Create a new part. 8.Import the revised geometry in the same format. Green lettering indicates the steps required to maintain associativity.

3. Page 3 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Associativity for Imported Data 9.Switch to the Idealized part and the Modeling application. 10.Open the assembly tab, highlight the original part.  Under the 3 rd MB, Select “Replace Component”  When prompted select the revised part 11.Switch to the Part Navigator, highlight the Linked Part.  Under the 3 rd MB, Select “Update Link”  Select the replacement part  Select the Replacement Assistant  Select the geometric update

4. Page 4 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Associativity for Imported Data 13.Switch to the FEM and update the Mesh.  If any modifications were done on the FE entity level, they will need to be repeated. 14.In the SIM, create a clone of the original solution. Solve the new model. Both results files are available to compare.

5. Page 5 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Setting Defaults Verify that the defaults shown have been set. File  Options  Customer Defaults These are required for the idealized geometry.

6. Page 6 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Create a New Part A new part must be created before importing data.

7. Page 7 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Importing Data Select the import file type desired. Fill out the required data on the form.

8. Page 8 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Create FEA Files Switch to the Advanced Simulation application. Create a new FEM and SIM. Make sure that “Create Idealized Part” option is checked. To make geometry selection easier, change the use bodies to ‘Select Bodies’ and do not select any bodies.

9. Page 9 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Create Wave Link Switch to the Idealized part. Create a wave link of the geometry.  All bodies can be selected.  Turn on the “Hide Original” option.

10. Page 10 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Create FEA Model If the “Select Bodies” option was chosen, you need to add geometry to the FEM. Highlight the FEM  Under the 3 rd Mouse button, select Edit Select all bodies.  Only the linked bodies should be displayed

11. Page 11 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Create FEA Model Create the required mesh in the FEM. Create the desired boundary conditions in the SIM.

12. Page 12 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Solve Review Results SAVE ALL files

13. Page 13 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Revised Part Create a new file and import the revised data.

14. Page 14 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Using the Revised Part Switch to the idealized part. Select the Assembly Navigator.  Highlight the part  Under 3 rd Mouse Button, select When prompted select the revised part. This part can be loaded into NX or can be selected from the O/S.

15. Page 15 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software JT Update For JT files, a new revised part does not need to be created. Replace the original JT file on the O/S with the revised JT.  Use the same name Make the part the displayed part. Select: File/Properties Select: Update Part File Switch to the idealized part.

16. Page 16 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Updating the Part Switch to the Part Navigator Highlight the Linked Body  Under the 3 rd Mouse Button select Edit Parameters  Select the new body. Select the Replacement Assistant

17. Page 17 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Updating the Part Select the Geometric matching algorithm Select the Find Geometric Matches

18. Page 18 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Updating the Part To verify matches, each match can be highlighted. The total number of matches will be shown in the lower right corner.

19. Page 19 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Updating FEM Switch to the FEM. Select the Update Mesh icon.

20. Page 20 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Clone the Solution Highlight Solution 1  Under 3 rd Mouse Button select Clone  Rename the new Solution

21. Page 21 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Compare Solutions Solve the new solution. Both solutions can be displayed in the Post Navigator.

22. Page 22 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Weld Example Original part is shown. There are 2 bodies. The weld was added to the idealized part.

23. Page 23 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software FEM and SIM The mesh and boundary conditions were applied. The model was solved.

24. Page 24 © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software Updated Part The model was updated. The new FEM is shown.

25. © 2008. Siemens Product Lifecycle Management Software Inc. All rights reserved Siemens PLM Software THANK YOU!