Chapter Menu Matter—Properties and Change Section 3.1Section 3.1Properties of Matter Section 3.2Section 3.2 Changes in Matter Section 3.3Section 3.3 Mixtures of Matter Section 3.4Section 3.4 Elements and Compounds Exit Click a hyperlink or folder tab to view the corresponding slides.
Section 3-1 Section 3.1 Properties of Matter Identify the characteristics of a substance. density: a ratio that compares the mass of an object to its volume Distinguish between physical and chemical properties. Differentiate among the physical states of matter.
Section 3-1 Section 3.1 Properties of Matter (cont.) states of matter solid liquid gas vapor Most common substances exist as solids, liquids, and gases, which have diverse physical and chemical properties. physical property extensive property intensive property chemical property
Section 3-1 Substances Matter is anything that has mass and takes up space. Matter is everything around us. Matter with a uniform and unchanging composition is a substance.
Section 3-1 States of Matter The physical forms of matter, either solid, liquid, or gas, are called the states of matter.states of matter Solids are a form of matter that have their own definite shape and volume.Solids Liquids are a form of matter that have a definite volume but take the shape of the container.Liquids
Section 3-1 States of Matter (cont.) Gases have no definite shape or volume. They expand to fill their container.Gases Vapor refers to the gaseous state of a substance that is a solid or liquid at room temperature.Vapor
Section 3-1 Physical Properties of Matter A physical property is a characteristic that can be observed or measured without changing the sample’s composition.physical property
Section 3-1 Physical Properties of Matter (cont.) Extensive properties are dependent on the amount of substance present, such as mass, length, or volume.Extensive properties Intensive properties are independent of the amount of substance present, such as density.Intensive properties
Section 3-1 Chemical Properties of Matter The ability of a substance to combine with or change into one or more other substances is called a chemical property.chemical property –Iron forming rust –Copper turning green in the air
Section 3-1 Observing Properties of Matter A substance can change form–an important concept in chemistry. Chemical properties can change with specific environmental conditions, such as temperature and pressure.
A.A B.B C.C D.D Section 3-1 Section 3.1 Assessment Density is what kind of property? A.atomic B.intensive C.extensive D.dependent
A.A B.B C.C D.D Section 3-1 Section 3.1 Assessment What defines a gas? A.Gases have a definite volume and shape. B.Gases have a definite volume but take the shape of their container. C.Gases have no definite volume or shape. D.Gases have a definite shape but no definite volume.
Section 3-2 Section 3.2 Changes in Matter Define physical change and list several common physical changes. observation: orderly, direct information gathering about a phenomenon Define chemical change and list several indications that a chemical change has taken place. Apply the law of conservation of mass to chemical reactions.
Section 3-2 Section 3.2 Changes in Matter (cont.) Matter can undergo physical and chemical changes. physical change phase change chemical change law of conservation of mass
Section 3-2 Physical Changes A change that alters a substance without changing its composition is known as a physical change. physical change A phase change is a transition of matter from one state to another.phase change Boiling, freezing, melting, and condensing all describe phase changes in chemistry.
Section 3-2 Chemical Changes A change that involves one or more substances turning into new substances is called a chemical change.chemical change Decomposing, rusting, exploding, burning, or oxidizing are all terms that describe chemical changes.
Section 3-2 Conservation of Mass The law of conservation of mass states that mass is neither created nor destroyed in a chemical reaction, it is conserved.law of conservation of mass The mass of the reactants equals the mass of the products. mass reactants = mass products
A.A B.B C.C D.D Section 3-2 Section 3.2 Assessment When one substances turns into another, what kind of change has taken place? A.chemical reaction B.physical reaction C.extensive reaction D.nuclear reaction
A.A B.B C.C D.D Section 3-2 Section 3.2 Assessment The law of conservation of mass states that: A.Matter can be created and destroyed. B.Matter can be created but not destroyed. C.The products of a reaction always have a greater mass than the reactants. D.The products of a reaction must have the same mass as the reactants.
Section 3-3 Section 3.3 Mixtures of Matter Contrast mixtures and substances. substance: a form of matter that has a uniform and unchanging composition; also known as a pure substance Classify mixtures as homogeneous or heterogeneous. List and describe several techniques used to separate mixtures.
Section 3-3 Section 3.3 Mixtures of Matter (cont.) Most everyday matter occurs as mixtures—combinations of two or more substances. mixture heterogeneous mixture homogeneous mixture solution filtration distillation crystallization sublimation chromatography
Section 3-3 Mixtures A mixture is a combination of two or more pure substances in which each pure substance retains its individual chemical properties.mixture A homogenous mixture is a mixture where the composition is constant throughout.homogenous mixture
Section 3-3 Mixtures (cont.) Homogeneous mixtures are also called solutions. solutions A heterogeneous mixture is a mixture where the individual substances remain distinct.heterogeneous mixture
Section 3-3 Separating Mixtures Filtration is a technique that uses a porous barrier to separate a solid from a liquid in a heterogeneous mixture.Filtration Distillation is a separation technique for homogeneous mixtures that is based on the differences in boiling points of substances.Distillation Crystallization is a separation technique for homogenous mixtures that results in the formation of pure solid particles from a solution containing the dissolved substance.Crystallization
Section 3-3 Separating Mixtures (cont.) Sublimation is the process of a solid changing directly to a gas, which can be used to separate mixtures of solids when one sublimates and the other does not.Sublimation Chromatography is a technique that separates the components of a mixture on the basis of tendency of each to travel across the surface of another material.Chromatography
A.A B.B C.C D.D Section 3-3 Section 3.3 Assessment Which is NOT a technique for separating a homogenous mixture? A.crystallization B.distillation C.filtration D.chromatography
A.A B.B C.C D.D Section 3-3 Section 3.3 Assessment Which of the following is a heterogeneous mixture? A.seawater B.silver mercury amalgam C.atmosphere D.salad dressing
Section 3-4 Section 3.4 Elements and Compounds Distinguish between elements and compounds. proportion: the relation of one part to another or to the whole with respect to quantity Describe the organization of elements in the periodic table. Explain how all compounds obey the laws of definite and multiple proportions.
Section 3-4 Section 3.4 Elements and Compounds (cont.) A compound is a combination of two or more elements. element periodic table compound law of definite proportions percent by mass law of multiple proportions
Section 3-4 Elements An element is a pure substance that cannot be separated into simpler substances by physical or chemical means.element 92 elements occur naturally on Earth. Each element has a unique name and a one, two, or three-letter symbol. The periodic table organizes the elements into a grid of horizontal rows called periods and vertical columns called groups.periodic table
Section 3-4 Compounds A compound is a made up of two or more elements combined chemically.compound Most of the matter in the universe exists as compounds. Table salt, NaCl, and water, H 2 O, are compounds.
Section 3-4 Compounds (cont.) Elements can never be separated. Compounds can be broken into components by chemical means.
Section 3-4 Compounds (cont.) This figure shows electrolysis of water to form hydrogen and oxygen.
Section 3-4 Compounds (cont.) The properties of a compound are different from its component elements.
Section 3-4 Law of Definite Proportions The law of definite proportions states that a compound is always composed of the same elements in the same proportion by mass, no matter how large or small the sample.law of definite proportions
Section 3-4 Law of Definite Proportions (cont.) The relative amounts are expressed as percent by mass, the ratio of the mass of each element to the total mass of the compound expressed as a percentage. percent by mass
Section 3-4 Law of Definite Proportions (cont.) This table demonstrates that the percentages of elements in sucrose remain the same despite differences in sample amount.
Section 3-4 Law of Multiple Proportions The law of multiple proportions states that when different compounds are formed by a combination of the same elements, different masses of one element combine with the same relative mass of the other element in whole number ratios.law of multiple proportions –H 2 O 2 and H 2 O –Copper(I) chloride and copper(II) chloride
Section 3-4 Law of Multiple Proportions (cont.)
A.A B.B C.C D.D Section 3-4 Section 3.4 Assessment What is a period on the periodic table of the elements? A.a vertical columns B.even numbered elements only C.horizontal rows D.the last vertical column only
A.A B.B C.C D.D Section 3-4 Section 3.4 Assessment An element is a substance that cannot be A.divided into simpler substances. B.combined to form a mixture. C.combined to form an element. D.different phases.
Resources Menu Chemistry Online Study Guide Chapter Assessment Standardized Test Practice Image Bank Concepts in Motion
Study Guide 1 Section 3.1 Properties of Matter Key Concepts The three common states of matter are solid, liquid, and gas. Physical properties can be observed without altering a substance’s composition. Chemical properties describe a substance’s ability to combine with or change into one or more new substances. External conditions can affect both physical and chemical properties.
Study Guide 2 Section 3.2 Changes in Matter Key Concepts A physical change alters the physical properties of a substance without changing its composition. A chemical change, also known as a chemical reaction, involves a change in a substance’s composition. In a chemical reaction, reactants form products. The law of conservation of mass states that mass is neither created nor destroyed during a chemical reaction; it is conserved. mass reactants = mass products
Study Guide 3 Section 3.3 Mixtures of Matter Key Concepts A mixture is a physical blend of two or more pure substances in any proportion. Solutions are homogeneous mixtures. Mixtures can be separated by physical means. Common separation techniques include filtration, distillation, crystallization, sublimation, and chromatography.
Study Guide 4 Section 3.4 Elements and Compounds Key Concepts Elements cannot be broken down into simpler substances. Elements are organized in the periodic table of the elements. Compounds are chemical combinations of two or more elements and their properties differ from the properties of their component elements.
Study Guide 4 Section 3.4 Elements and Compounds (cont.) Key Concepts The law of definite proportions states that a compound is always composed of the same elements in the same proportions. The law of multiple proportions states that if elements form more than one compound, those compounds will have compositions that are whole-number multiples of each other.
A.A B.B C.C D.D Chapter Assessment 1 Which of the following is NOT a physical property of water? A.Ice melts at 0°C. B.Water boils at 100. C.Water reacts violently with pure sodium. D.Water is a liquid at room temperature.
A.A B.B C.C D.D Chapter Assessment 2 28.0 grams of nitrogen gas reacts completely with 6.0 grams of hydrogen to form 34.0 grams of ammonia. What does this demonstrate? A.the law of conservation of energy B.sublimation C.distillation D.the law of conservation of mass
A.A B.B C.C D.D Chapter Assessment 3 What is the best way to separate salt dissolved in water? A.sublimation B.crystallization C.freezing D.filtration
A.A B.B C.C D.D Chapter Assessment 4 Two or more elements chemically joined form what? A.substance B.heterogeneous mixture C.homogenous solution D.compound
A.A B.B C.C D.D Chapter Assessment 5 What is the ratio of oxygen to carbon in carbon dioxide (CO 2 )? A.2:1 B.1:2 C.1:1 D.1:3
A.A B.B C.C D.D STP 1 Which is NOT a chemical reaction? A.a car rusting B.dissolving sugar in water C.wood burning D.a banana ripening
A.A B.B C.C D.D STP 2 Which describes a substance that is in the liquid state? A.It has a definite shape. B.It has no definite volume. C.It can be compressed into a smaller volume. D.It has a definite volume.
A.A B.B C.C D.D STP 3 Elements in the same period are likely to have similar ____. A.physical properties B.densities C.chemical properties D.melting points
A.A B.B C.C D.D STP 4 Filtration is an easy way to separate what? A.heterogeneous mixture B.homogeneous mixture C.compounds D.solutions
A.A B.B C.C D.D STP 5 Compounds can be broken into their component elements by which of the following? A.crystallization B.distillation C.filtration D.chemical reaction
CIM Figure 3.4 Three Common States of Matter Figure 3.10 Conservation of Mass Table 3.3 Types of Solution Systems
Help Click any of the background top tabs to display the respective folder. Within the Chapter Outline, clicking a section tab on the right side of the screen will bring you to the first slide in each respective section. Simple navigation buttons will allow you to progress to the next slide or the previous slide. The “Return” button will allow you to return to the slide that you were viewing when you clicked either the Resources or Help tab. The Chapter Resources Menu will allow you to access chapter specific resources from the Chapter Menu or any Chapter Outline slide. From within any feature, click the Resources tab to return to this slide. To exit the presentation, click the Exit button on the Chapter Menu slide or hit Escape [Esc] on your keyboards while viewing any Chapter Outline slide.
End of Custom Shows This slide is intentionally blank.