1. Version 1.0 digitaloffice.intel.com Intel ® vPro ™ Technology Intel ® Active Management Technology Setup and Configuration Toshiba Laptop –Tecra A9 Small Business Mode

2. Version 1.0 digitaloffice.intel.com 2 Legal Disclaimer Intel Confidential – Intel Internal Use Only Copyright © 2008 Intel Corporation. All rights reserved. Intel, the Intel logo, Intel. Leap ahead., the Intel. Leap ahead. logo, Intel vPro, Intel Active Management Technology, and Intel Core 2 Duo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other names and brands may be claimed as the property of their respective owners.

3. Version 1.0 digitaloffice.intel.com 3 Table of Contents Client Information Setup and Configuration

4. Version 1.0 digitaloffice.intel.com 4 Client Information The following Setup and Configuration instruction as based on an Intel® Laptop Board. Product Details –Toshiba Tecra A9 Depending on your motherboard manufacturer and firmware version, you may have a different interface or experience then what is listed in this presentation. Regardless, the following information should give you the basic steps for configuring any Intel® vPro™ client in Small Business mode.

5. Version 1.0 digitaloffice.intel.com 5 What is Setup and Configuration? Setup and Configuration is the process that makes Intel® Active Management Technology features accessible to management applications. Before management applications can access an Intel® Active Management Technology device, the device must be populated with various configuration settings such as usernames, passwords, network parameters, Transport Layer Security (TLS) certificates (applies to Enterprise Mode), and keys necessary for secure communications.

6. Version 1.0 digitaloffice.intel.com 6 Setup and Configuration

7. Version 1.0 digitaloffice.intel.com 7 Enter the BIOS by holding down the ESC key and F1 during power on. Navigate to page 3 by hitting Page Down twice. Enable the MEBx Setup by hitting the space bar once. Setup and Configuration

8. Version 1.0 digitaloffice.intel.com 8 Hit the End button once to save the changes and exit. When prompted as shown, hit the Y key once. Setup and Configuration

9. Version 1.0 digitaloffice.intel.com 9 When prompted during the boot process: Press CTRL-P Setup and Configuration

10. Version 1.0 digitaloffice.intel.com 10 Enter the password: admin Select: Change Intel® ME Password This is only required for initial setup and Configuration Password needs to be at least 8 characters, using upper and lower case letters, numbers, and symbols. Example: Acmec0rp! Type your password again to Verify. Setup and Configuration

11. Version 1.0 digitaloffice.intel.com 11 This is the Intel® Management Engine main screen where you can make changes to the: Intel® Management Engine Configuration Intel® Active Management Technology Configuration Change Intel® Management Engine Password Setup and Configuration

12. Version 1.0 digitaloffice.intel.com 12 Select: Intel® ME Configuration Setup and Configuration

13. Version 1.0 digitaloffice.intel.com 13 Press Y to Continue Setup and Configuration

14. Version 1.0 digitaloffice.intel.com 14 Select: Intel ME State Control Setup and Configuration

15. Version 1.0 digitaloffice.intel.com 15 Select: ENABLED Setup and Configuration

16. Version 1.0 digitaloffice.intel.com 16 Select: Intel® ME Firmware Local Update Setup and Configuration

17. Version 1.0 digitaloffice.intel.com 17 Set to: [*] ENABLED Setup and Configuration

18. Version 1.0 digitaloffice.intel.com 18 Select: Intel® ME Features Control Setup and Configuration

19. Version 1.0 digitaloffice.intel.com 19 Select: Manageability Feature Selection Setup and Configuration

20. Version 1.0 digitaloffice.intel.com 20 Set to: [*] Intel® AMT Setup and Configuration

21. Version 1.0 digitaloffice.intel.com 21 Select: Return to Previous Menu Setup and Configuration

22. Version 1.0 digitaloffice.intel.com 22 Select: Intel® ME Power Control Setup and Configuration

23. Version 1.0 digitaloffice.intel.com 23 Select: Intel® ME ON in Host Sleep States Setup and Configuration

24. Version 1.0 digitaloffice.intel.com 24 Set to: [*] Mobile: ON in xxx Select the desired mode Setup and Configuration

25. Version 1.0 digitaloffice.intel.com 25 Select: Return to Previous Menu Note:Note: Depending on the changes made, your system may restart.Depending on the changes made, your system may restart. If this occurs, please re-enter the setup by pressing when the system completes the restart.If this occurs, please re-enter the setup by pressing when the system completes the restart. Setup and Configuration

26. Version 1.0 digitaloffice.intel.com 26 Select again: Return to Previous Menu Setup and Configuration

27. Version 1.0 digitaloffice.intel.com 27 Select: Intel® AMT Configuration Setup and Configuration

28. Version 1.0 digitaloffice.intel.com 28 Select: Host Name Setup and Configuration

29. Version 1.0 digitaloffice.intel.com 29 Insert Windows computer name. Our example is: vpro-pc1 set computer name as desired Important Note:Important Note: In DHCP mode: The computer name must match the computer name in Windows In Static IP mode: The computer name must be different than the computer name in Windows. TCP/IP Configuration will be discussed in the upcoming slides. Setup and Configuration

30. Version 1.0 digitaloffice.intel.com 30 Select: TCP/IP Setup and Configuration

31. Version 1.0 digitaloffice.intel.com 31 The Network Interface should be Enabled by default Press N to NOT Disable Network Interface Setup and Configuration

32. Version 1.0 digitaloffice.intel.com 32 DHCP should be Enabled by default Press N to NOT Disable DHCP Setup and Configuration

33. Version 1.0 digitaloffice.intel.com 33 Set the Domain name. Our example is: vprodemo.com Setup and Configuration

34. Version 1.0 digitaloffice.intel.com 34 Select: Provision Model Setup and Configuration

35. Version 1.0 digitaloffice.intel.com 35 By Default should be set to: Intel® AMT 2.5 Mode Press Y to change to Small Business Setup and Configuration

36. Version 1.0 digitaloffice.intel.com 36 After Provisioning to Small Business the Intel® AMT Configuration menu will change Setup and Configuration

37. Version 1.0 digitaloffice.intel.com 37 Select: SOL/IDE-R Setup and Configuration

38. Version 1.0 digitaloffice.intel.com 38 Press Y to Continue Setup and Configuration

39. Version 1.0 digitaloffice.intel.com 39 Set Username & Password to: [*] Enabled Setup and Configuration

40. Version 1.0 digitaloffice.intel.com 40 Set Serial Over LAN to: [*] Enabled Setup and Configuration

41. Version 1.0 digitaloffice.intel.com 41 Set IDE Redirection to: [*] Enabled Setup and Configuration

42. Version 1.0 digitaloffice.intel.com 42 Select: Secure Firmware Update Setup and Configuration

43. Version 1.0 digitaloffice.intel.com 43 Set to: [*] ENABLED Setup and Configuration

44. Version 1.0 digitaloffice.intel.com 44 Select: PRTC Setup and Configuration

45. Version 1.0 digitaloffice.intel.com 45 Can usually leave blank but if different then shown, change PRTC to: YYYY:MM:DD:HH:MM:SS Setup and Configuration

46. Version 1.0 digitaloffice.intel.com 46 Select: Idle Timeout Setup and Configuration

47. Version 1.0 digitaloffice.intel.com 47 Normally leave unchanged but if not 0 change to: 0 Setup and Configuration

48. Version 1.0 digitaloffice.intel.com 48 Scroll Down and Select: Return to Previous Menu At this point, you are done configuring the machine. If it restarts, you can let it boot normally, if not, continue with the slides. Setup and Configuration

49. Version 1.0 digitaloffice.intel.com 49 To Exit the Main Menu Select: Exit Setup and Configuration

50. Version 1.0 digitaloffice.intel.com 50 Press Y to Confirm Exit Once you Confirm Exit the system will restart and your settings will be in effect. Setup and Configuration