1. ® 2011 Generation Brands LED PAR 20 @ a Glance 50W Halogen PAR 20 equiv. SGL P/N97311S Light output (lumens)350 Power8W Efficacy43 lpw CRI85 Color Temp*3000K Beam angle40 Life (hours)50K DimmableYes ListingWet Where to Use Any SGL 4” recessed housings and trims qualified for 50W halogen PAR 20 Transitions rail mount directional, track kits Wet listed, can be used outdoor in just a par holder Good performer vs. halogen equivalents LRG, new catalog and website will list upgrade options with all compatible fixtures LED 1

2. ® 2011 Generation Brands LED LED PAR 20 @ a Glance 2

3. ® 2011 Generation Brands Dimmer Compatibility – LED PAR 20 97311S, 97411S MakeModels Lutron ADRIANI AY600; Commercial Systems QSG-6P, LP-RPM-4A-120; Diva DV-600, DVCL-153P; Interfaces PHPM-WBX; Homeworks HW-RPM-4A120, HxD-6ND; Radio Ra RRD-10ND; Stanza SZ- 6ND; Lutron SZ-6ND, HxD-6ND, S-600PR-WH, DV-600PR-WH, TG-600PR-WH, AY-600P, Q600P, GL-600, CN-600PWH, DV-603PG, S-600, S-600P, LG-600P, D-600PH, TT-300NLH, TG-603PG, DV- 600PR-WH OthersAce 34050, 3027596; Leviton 6633-PL, 6684, 6631, IPI06-1LX, Legrand DrRD4W * Note – Dimmer listing is subject to change. Dimmer compatibility list indicates those dimmers that have been tested and operate properly under normal conditions. In certain cases, approved dimmers are offered in higher wattage varieties that are also compliant and allow for further installation of additional lamps if kept within the maximum in-rush current equivalent noted in the table above. Each application is unique and various factors such as load, common neutrals and other electrical products on the circuit may cause variance in performance. Consult dimming system manufacturer for additional support in operation. Dimmable down to 5% of light output 1 SGL LED LampIn-Rush Current Equivalent Max # of Lamps per 600 watt Dimmer LED PAR 20 8W, 973111S, 974111s 80 Watts7 Recommended Number of Lamps per 600W Dimmer* While an LED lamp may draws as few as 8 watts continuously, it could have an in-rush current spike and should therefore be treated as a 80W load when sizing dimmers. The recommended number of 97308S that should be used on a typical approved dimmers is as follows.