1. Springs

2. Hooke’s Law Any spring has a natural length at which it exerts no net force on the mass m. This length, or position, is called the equilibrium position and is labeled x 0. If the mass is moved away from this position, in either the left or right direction, the spring will exert a force on the mass that will act in the direction of returning it to the equilibrium position. This force is called the restoring force. The magnitude of the restoring force is directly proportional to the distance that the spring has been stretched or compressed away from x 0. Thus the equation for the restoring force can be written as: m m

3. Spring Example A 5kg object is hung from a spring and stretches the spring 15cm from it’s equilibrium position. What is the spring constant (stiffness of the spring)? How far would a 7kg object stretch the spring? xx

4. Spring Example m x1x1 An block of mass m hangs from a spring with spring constant k. The spring is stretched to a length x 1 as shown in the figure. What would be the new length (call it x 3 ) of the spring if we added two more identical blocks?

5. Spring Example m x3x3 An block of mass m hangs from a spring with spring constant k. The spring is stretched to a length x 1 as shown in the figure. What would be the new length (call it x 3 ) of the spring if we added two more identical blocks? m m

6. Spring Example m x1x1 An block of mass m hangs from a spring with spring constant k. The spring is stretched to a length x 1 as shown in the figure. What would be the new length (call it x 3 ) of the spring if we added two more identical blocks? x0x0 x

7. Spring Example m x3x3 An block of mass m hangs from a spring with spring constant k. The spring is stretched to a length x 1 as shown in the figure. What would be the new length (call it x 3 ) of the spring if we added two more identical blocks? m m

8. Stretching Rigid objects like steel rods behave a lot like springs - Stretch them a just a little and after you release them, they’ll return to their original shape -If they’re very stiff, so you don’t notice much of a stretch -If you stretch them a lot, part or all of the stretch can become permanent, with potentially catastrophic results

9. View of Matter Matter can be viewed as a series of atoms connected by springs. The stiffer the springs the more tightly the atoms are held together in the material. The material can be stretched …as long as we don’t break the springs The material can be compressed …as long as we don’t smash the springs In both cases the material returns to its original shape

10. Young’s Modulus The “stress” applied to a material is the Force/Area. How much the material responds to that stress is called the “strain”  L/L. The two are related by Young’s Modulus Y. Y [Y] = N/m 2 = Pascal A

11. Example A car is suspended from the ceiling by a steel rod 1 cm in diameter and 2 m long. If the car has a mass of 1200kg, by how much does the steel rod stretch?

12. X0X0 m Where does Y come from?

13. X0X0 ΔX m Where does Y come from?

14. W L

15. W L ΔL

16. Block on the wall An 8 N horizontal force F pushes a block weighing 12.0 N against a vertical wall. The coefficient of static friction between the wall and the block is 0.69, and the coefficient of kinetic friction is 0.49. Assume that the block is not moving initially. Horizontally the forces add up to be zero (no motion in this direction) Therefore, N and F have the same magnitude but opposite directions Since the weight is larger than the static friction force then the block is sliding down the wall (kinetic).

17. Block on the wall An 8 N horizontal force F pushes a block weighing 12.0 N against a vertical wall. The coefficient of static friction between the wall and the block is 0.69, and the coefficient of kinetic friction is 0.49. Assume that the block is not moving initially. Vertically the forces don’t add up to be zero (acceleration)

18. Block on the wall (revisited) How much force must the person exert against the same block to hold it in place on the wall? The coefficient of static friction between the wall and the block is 0.69, and the coefficient of kinetic friction is 0.49. Assume that the block is not moving initially. Vertically the forces have to add up to be zero.

19. Reminders Reading: Chapter 5.1 – 5.4 HW 03 Due WEDNESDAY at 10 PM – Additional office hours Tuesday at 1:30 Midterm 1 is Friday during recitation time! – Held in Osmond 119 (next door) – Covers everything so far