1. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 1 Danfoss Bauer GmbH Installation Notes MC-CAT Version 6.0

2. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 2 Danfoss Bauer GmbH Contents Installation Notes MC-Cat Version 6.0 Installation MC-Cat Version 6.0 Installation CAD Software2 1 Update of CAD Software 3 Update of MC-Cat Version 6.0 4 Download MC-Cat Version 6.0 in Internet 5

3. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 3 Danfoss Bauer GmbH MC-CAT Wenn the CD is put in the drive and AUTOPLAY is activated, the above screen appears. If not, then please start SETUP.EXE on the CD-ROM. Select the language for the installation and press OK. zurück Installation Notes MC-Cat Version 6.0

4. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 4 Danfoss Bauer GmbH MC-CAT The CD-ROM can be started here„Start from CD…“, (without installation) the CAD Software installed „Install CAD Software“ or the CD Software installed with „WEITER >“ zurück Installation Notes MC-Cat Version 6.0

5. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 5 Danfoss Bauer GmbH MC-CAT The target directory can be selected here, the installation goes further with WEITER >. zurück Installation Notes MC-Cat Version 6.0

6. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 6 Danfoss Bauer GmbH MC-CAT The name for the Start Menu can be given here, then further with WEITER >. zurück Installation Notes MC-Cat Version 6.0

7. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 7 Danfoss Bauer GmbH MC-CAT Is a start symbol required for the desktop? Then click here and then WEITER > zurück Installation Notes MC-Cat Version 6.0

8. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 8 Danfoss Bauer GmbH MC-CAT Click INSTALLIEREN to complete the installation. zurück Installation Notes MC-Cat Version 6.0

9. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 9 Danfoss Bauer GmbH Contents Installation Notes MC-Cat Version 6.0 Installation MC-Cat Version 6.0 Installation CAD Software2 1 Update of CAD Software 3 Update of MC-Cat Version 6.0 4 Download MC-Cat Version 6.0 in Internet 5

10. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 10 Danfoss Bauer GmbH CAD Software Click on „Install CAD-Software…“. CAUTION! Installations- or Administrator Rights are needed. zurück Installation Notes MC-Cat Version 6.0

11. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 11 Danfoss Bauer GmbH CAD Software Do you want to install? Click on OK. A click on Abbrechen will terminate the installation. zurück Installation Notes MC-Cat Version 6.0

12. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 12 Danfoss Bauer GmbH CAD Software Information over the further installation… No input is necessary. zurück Installation Notes MC-Cat Version 6.0

13. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 13 Danfoss Bauer GmbH CAD Software Please read the notes carefully and then click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

14. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 14 Danfoss Bauer GmbH CAD Software Select here the components to install. Danfoss and WorldCAT- CIF must be installed. The other componets are tools to measure the geometries generated in case no CAD system is available. Then click WEITER>. zurück Installation Notes MC-Cat Version 6.0

15. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 15 Danfoss Bauer GmbH CAD Software The installation of the single components now begins. Please read the notes carefully. Click WEITER> to carry on with the installation. zurück Installation Notes MC-Cat Version 6.0

16. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 16 Danfoss Bauer GmbH CAD Software Select here the 2D CAD system to which the WORLDCAT- CIF will connect to on the same computer. If no system is available leave all selections open. The click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

17. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 17 Danfoss Bauer GmbH CAD Software The installation of WORLDCAT-CIF now takes place. Click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

18. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 18 Danfoss Bauer GmbH CAD Software Select here the 3D CAD system to which the WORLDCAT- CIF will connect to on the same computer. If no system is available leave all selections open. The click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

19. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 19 Danfoss Bauer GmbH CAD Software The installation of WORLDCAT-CIF 3D now takes place. Click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

20. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 20 Danfoss Bauer GmbH CAD Software Click on Fertigstellen> to complete the installation of the WorldCAT-CIF. zurück Installation Notes MC-Cat Version 6.0

21. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 21 Danfoss Bauer GmbH CAD Software Now all CAD Information will be installed. Click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

22. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 22 Danfoss Bauer GmbH CAD Software The Installation is now ready. Continue by clicking on WEITER>. zurück Installation Notes MC-Cat Version 6.0

23. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 23 Danfoss Bauer GmbH CAD Software All components are now installed. Click on WEITER> to complete the installation. zurück Installation Notes MC-Cat Version 6.0

24. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 24 Danfoss Bauer GmbH CAD Software Please read the notes carefully and finally click on OK to re-start the computer. zurück Installation Notes MC-Cat Version 6.0

25. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 25 Danfoss Bauer GmbH Contents Installation Notes MC-Cat Version 6.0 Installation MC-Cat Version 6.0 Installation CAD Software2 1 Update of CAD Software 3 Update of MC-Cat Version 6.0 4 Download MC-Cat Version 6.0 in Internet 5

26. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 26 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet Click on the Symbol to reach the update page. Should one of the lines be RED, the MC-Cat update button will be active. Click here to start the UPDATES … zurück Installation Notes MC-Cat Version 6.0

27. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 27 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet Max. 3 updates will be started. Should only 1 be started, then the file must be downloaded, MC-Cat closed down, the update started and MC-Cat started again. Then further downloads can be started. zurück Installation Notes MC-Cat Version 6.0

28. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 28 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet Select the installation language and click OK. zurück Installation Notes MC-Cat Version 6.0

29. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 29 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet Read carefully and click WEITER>. zurück Installation Notes MC-Cat Version 6.0

30. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 30 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet The EXACT directory of the MC-Cat should be shown here. Please check carefully. Further with click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

31. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 31 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet Click Ja. zurück Installation Notes MC-Cat Version 6.0

32. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 32 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet Which Start Menu name should be used?? Then click WEITER>. zurück Installation Notes MC-Cat Version 6.0

33. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 33 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet Should another desktop symbol be created? (Not necessary) The click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

34. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 34 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet The selection can be seen here. Should the details be incorrect then click on <ZURÜCK otherwise Installieren. zurück Installation Notes MC-Cat Version 6.0

35. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 35 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet The installation progress is shown…… zurück Installation Notes MC-Cat Version 6.0

36. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 36 Danfoss Bauer GmbH Update MC-Cat Version 6.0 in Internet The installation is now finished. Click on Fertigstellen to complete the installation. MC-Cat is then re-started. If necessary, further updates can now ne started. zurück Installation Notes MC-Cat Version 6.0

37. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 37 Danfoss Bauer GmbH Contents Installation Notes MC-Cat Version 6.0 Installation MC-Cat Version 6.0 Installation CAD Software2 1 Update of CAD Software 3 Update of MC-Cat Version 6.0 4 Download MC-Cat Version 6.0 in Internet 5

38. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 38 Danfoss Bauer GmbH CAD Software UPDATE After downloading the UPDATE, and click on the EXE file, the given message appears. Click OK to continue. zurück Installation Notes MC-Cat Version 6.0

39. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 39 Danfoss Bauer GmbH CAD Software UPDATE Should no user inouts be required, the given screen appears after a short time. Click on OK. zurück Installation Notes MC-Cat Version 6.0

40. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 40 Danfoss Bauer GmbH CAD Software UPDATE Should user input be required, the following screen appears after clicking OK on the previous screen. Read carefully and click WEITER>. zurück Installation Notes MC-Cat Version 6.0

41. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 41 Danfoss Bauer GmbH CAD Software UPDATE In this example the CAD system (if present) needs to be selected. Should no system be present, all points should be de-selected and then click on WEITER>. zurück Installation Notes MC-Cat Version 6.0

42. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 42 Danfoss Bauer GmbH CAD Software UPDATE Click on Fertigstellen> to complete the installation. zurück Installation Notes MC-Cat Version 6.0

43. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 43 Danfoss Bauer GmbH Contents Installation Notes MC-Cat Version 6.0 Installation MC-Cat Version 6.0 Installation CAD Software2 1 Update of CAD Software 3 Update of MC-Cat Version 6.0 4 Download MC-Cat Version 6.0 in Internet 5

44. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 44 Danfoss Bauer GmbH Download MC-Cat Version 6.0 in Internet www.bauergear.info zurück Click hier to reach the downloads. Installation Notes MC-Cat Version 6.0

45. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 45 Danfoss Bauer GmbH Download MC-Cat Version 6.0 in Internet Firstly 1) MC-Cat and then 2) CAD Files should be downloaded. The CAD Files can be downloaded as 1 file or smaller 10MB files…. zurück Click here for MC-Cat…. Click here for CAD Files (1 File)…. Click here for CAD Files (7 Files)…. Installation Notes MC-Cat Version 6.0

46. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 46 Danfoss Bauer GmbH Download MC-Cat Version 6.0 in Internet The download will be started. The ZIP archive should be saved and extracted in a temporary directory and the file SETUP.EXE started. zurück Installation Notes MC-Cat Version 6.0

47. Confidential / Property of Danfoss Bauer GmbH 23 June 2006 47 Danfoss Bauer GmbH Contents Installation Notes MC-Cat Version 6.0 Installation MC-Cat Version 6.0 Installation CAD Software2 1 Update of CAD Software 3 Update of MC-Cat Version 6.0 4 Download MC-Cat Version 6.0 in Internet 5