1. CCNA2 Routing Perrine modified by Brierley Page 18/6/2015 Module 11 Access Control 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

2. CCNA2 Routing Perrine modified by Brierley Page 28/6/2015 Module 11 Access Control 172.16.2.0172.16.4.0 e0e1 s0 172.16.4.3 Computer 172.16.3.2 172.16.2.2 172.16.3.1 s1 172.16.3.0 172.16.4.2 Server

3. CCNA2 Routing Perrine modified by Brierley Page 38/6/2015 Module 11 A HIGH LEVEL VIEW of ACLs High Level View

4. CCNA2 Routing Perrine modified by Brierley Page 48/6/2015 Module 11 Access Control Lists Standard Extended

5. CCNA2 Routing Perrine modified by Brierley Page 58/6/2015 Module 11 Standard: Interface Fa 0/0/0 ip access-group 1 out access-list 1 deny 172.16.4.13 0.0.0.0 access-list 1 permit any ________________________________________________________________ Extended: Interface Fa 0/0/0 ip access-group 101 in access-list 101 deny tcp 172.16.4.0 0.0.0.255 172.16.3.0 0.0.0.255 eq www access-list 101 permit ip any any High Level View

6. CCNA2 Routing Perrine modified by Brierley Page 68/6/2015 Module 11 Standard Access Control Lists ACLs are instructions that are applied to a router interfaces. The ACLs describe the kind of packets that are to be permitted or denied. Permitted or Denial testing can be based on: source address destination address port number ACLs are configured on the router Interfaces to control access to a network. ACLs must be defined separately for each protocol; Unique for IP, Unique for IPX; Unique for AppleTalk, etc. Some times ACLs are called packet filters.

7. CCNA2 Routing Perrine modified by Brierley Page 78/6/2015 Module 11 Standard Access Control Lists

8. CCNA2 Routing Perrine modified by Brierley Page 88/6/2015 Module 11 Extended ACLs

9. CCNA2 Routing Perrine modified by Brierley Page 98/6/2015 Module 11 Named ACLs

10. CCNA2 Routing Perrine modified by Brierley Page 108/6/2015 Module 11 Standard ACLs should be placed close to the destination. Extended ACLs should be placed close to the source. Placing ACLs

11. CCNA2 Routing Perrine modified by Brierley Page 118/6/2015 Module 11 A firewall is an architectural structure that exists between the user and the outside world to protect the internal network from intruders. Firewalls

12. CCNA2 Routing Perrine modified by Brierley Page 128/6/2015 Module 11 Restricting Virtual Terminal Access

13. CCNA2 Routing Perrine modified by Brierley Page 138/6/2015 Module 11 Summary

14. CCNA2 Routing Perrine modified by Brierley Page 148/6/2015 Module 11 Reasons to create ACLs : limit network traffic - hence increase network performance provide traffic flow - limit traffic through the network provide for security ACLs establish which traffic is blocked which traffic is not blocked ACL - Access Control Lists

15. CCNA2 Routing Perrine modified by Brierley Page 158/6/2015 Module 11 A MORE DETAILED VIEW of ACLs DETAIL

16. CCNA2 Routing Perrine modified by Brierley Page 168/6/2015 Module 11 Cisco IOS checks each packet for: 1. destination address 2. source address 3. protocol 4. port number Each ACL statement is checked in a sequential order (first to last) and when there is a match, no more statements are checked. If the results are no matches, then the packet (by default) is discarded. Adding addition ACL statements to the end of an existing list is just a matter of adding the new statement. BUT, if deleting an existing ACL statement causes the entire access list to be deleted. ACL - Access Control Lists access-list 1 deny 192.169.1.0 0.0.255.255 access-list 1 deny 192.168.1.9 0.0.0.0 access-list 1 deny 172.16.4.0 0.0.0.255 access-list 1 permit any

17. CCNA2 Routing Perrine modified by Brierley Page 178/6/2015 Module 11 When a packet enters a router’s interface: “IN” (inbound) checking is required. The packet: 1)Is checked against the ACL list (if one exists) 2)Here It can be interrogated to permit or deny. 3)If denied the packet is dropped else, 4)It is matched against the routing table and passed to an “OUT” (outbound interface) ACL - Access Control Lists “OUT” (outbound) checking is required. 1) Here It can be interrogated to permit or deny. 2) If denied the packet is dropped 3) If permitted then packet is allowed “OUT” (outbound). The Outbound interface’s ACL is a different list from the inbound)

18. CCNA2 Routing Perrine modified by Brierley Page 188/6/2015 Module 11 ACL statements operate in a logical, sequential order. When a match is made the rest of the statements are not checked. If none the ACL statements match, then there is an implicit deny any rule. access-list 10 { permit | deny } { test conditions } access-list 1 deny 192.169.1.0 0.0.255.255 access-list 1 deny 192.168.1.9 0.0.0.0 access-list 1 deny 172.16.4.0 0.0.0.255 access-list 1 permit any access-list 10 { permit | deny } { test conditions } access-list 10 deny any ACL - Access Control Lists

19. CCNA2 Routing Perrine modified by Brierley Page 198/6/2015 Module 11 Two types of IP ACL : standard - has access list value of 1- 99 extended - has access list value of 100 - 199 Must be configured in global configuration mode. Router (config) # Steps in creating ACLs: 1) create the ACL (in config mode) 2) apply the ACL to an interface ACLs are used to filter: inbound traffic, or outbound traffic ACL - Access Control Lists

20. CCNA2 Routing Perrine modified by Brierley Page 208/6/2015 Module 11 Where to place ACLs Standard ACLs are place as close as possible to the destination. Extended ACLs are place as close as possible to the source.

21. CCNA2 Routing Perrine modified by Brierley Page 218/6/2015 Module 11 Configuring an Access List: Router(config)# access-list { permit | deny } { test conditions } Router(config)# access-list 1 permit { test conditions } Router(config)# access-list 50 deny { test conditions } To delete all ACL statements of an access-list Router(config)# no access-list Applying the Access List: At an interface: Router(config)# int E0 Router(config-if)# { protocol } access-group [ IN | OUT ] Out is the default if not mentioned Router(config-if)# ip access-group 1 Router(config-if)# ip access-group 50 To delete an ACL group statement (this will not delete the associated list): Router(config)# no access-group Where to place ACLs

22. CCNA2 Routing Perrine modified by Brierley Page 228/6/2015 Module 11 A wildcard is matched with an IP address or protocol address. It is a 32 bit mask divided into 4 octet, each containing 8 bits. A 0 in the wildcard means to check the bit in the IP you are testing. A 1 in the wildcard means ignore the bit in the IP you are testing. NOTE!!! Do NOT think subnet mask – that is a totally different meaning not related to the WILDCARD Wildcard

23. CCNA2 Routing Perrine modified by Brierley Page 238/6/2015 Module 11 Abbreviations To permit or deny any address: 0.0.0.0 255.255.255.255 Address Wildcard Use the abbreviation any Router(config)# access-list 1 permit 0.0.0.0 255.255.255.255 Router(config)# access-list 1 permit any Router(config)# access-list 1 deny 0.0.0.0 255.255.255.255 Router(config)# access-list 1 deny any

24. CCNA2 Routing Perrine modified by Brierley Page 248/6/2015 Module 11 To match all the bits of IP address use host: EX: 172. 30.16. 29 0. 0. 0. 0 Router(config)# access-list 1 permit 172.30.16.29 0.0.0.0 Router(config)# access-list 1 permit host 172.30.16.29 Abbreviations

25. CCNA2 Routing Perrine modified by Brierley Page 258/6/2015 Module 11 Standard ACLs Criteria: block all traffic from a network allow all traffic from a network deny entire protocol suits Standard ACLs only check the source address. Router(config)# access-list { deny | permit } source [ source wildcard] [log]

26. CCNA2 Routing Perrine modified by Brierley Page 268/6/2015 Module 11 What does this statement accomplish? Access-list 33 permit 172.16.0.0 0.0.255.255 log Permits all traffic from 172.16.0.0 and sends messages to the console every time the access list is executed. Standard ACLs

27. CCNA2 Routing Perrine modified by Brierley Page 278/6/2015 Module 11 What does this statement accomplish? Access-list 44 deny 172.16.13.7 0.0.0.0 log Denies traffic from host 172.16.13.7 and sends message to the console every time the access list is hit. Standard ACLs

28. CCNA2 Routing Perrine modified by Brierley Page 288/6/2015 Module 11 What does this statement accomplish? Access-list 55 deny 172.16.64.3 0.0.0.255 Denies all traffic from network 172.16.64.0 Standard ACLs

29. CCNA2 Routing Perrine modified by Brierley Page 298/6/2015 Module 11 The log command: Prints messages to the console which includes the ACL number, whether the packet was permitted or denied, the source address, and the number of packets. The message is generated for the first packet that matches, and then at five-minute intervals, including the number of packets permitted or denied in the prior five-minute interval. Log is used for debugging only not to be left active on live networks. Standard ACLs

30. CCNA2 Routing Perrine modified by Brierley Page 308/6/2015 Module 11 Example of applying the access-list : Router(config-if)# ip access-group 33 in Router(config-if)# ip access-group 44 out Standard ACLs

31. CCNA2 Routing Perrine modified by Brierley Page 318/6/2015 Module 11 To monitor IP access list: (in EXEC mode) show access-list Displays all access lists & their parameters configured on the router. (Does not show you which interface the list is set on.) show access-list Shows only the parameters for the access list. (Does not show you the interface the list is set on.) show ip access-list Shows only the IP access lists configured on the router show ip interface Shows which interfaces have access lists set (containing an access- group). show running-config Shows the routers entire configuration Standard ACLs

32. CCNA2 Routing Perrine modified by Brierley Page 328/6/2015 Module 11 R(config)# Interface e0 R(config-if)# ip access-group 1 out R(config)# Interface e1 R(config-if)# ip access-group 1 out R(config)# access-list 1 permit 172.16.0.0 0.0.255.255 What does it do? Standard ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

33. CCNA2 Routing Perrine modified by Brierley Page 338/6/2015 Module 11 R(config)# Interface e0 R(config-if)# ip access-group 1 out R(config)# Interface e1 R(config-if)# ip access-group 1 out R(config)# access-list 1 permit 172.16.0.0 0.0.255.255 Allows only traffic from source network 172.16.0.0 to be forwarded & and non-172.16.0.0 traffic is blocked. Standard ACLs One Access list used by multiple Interfaces 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

34. CCNA2 Routing Perrine modified by Brierley Page 348/6/2015 Module 11 R(config)# Interface e0 R(config-if)# ip access-group 1 out R(config)# access-list 1 deny 172.16.4.13 0.0.0.0 R(config)# access-list 1 permit any What does this do? Standard ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

35. CCNA2 Routing Perrine modified by Brierley Page 358/6/2015 Module 11 R(config)# Interface e0 R(config-if)# ip access-group 1 out R(config)# access-list 1 deny 172.16.4.13 0.0.0.0 R(config)# access-list 1 permit any Denies traffic from a specific device, 172.16.4.13 & allows all other traffic thru e0 to network 172.16.3.0. Standard ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

36. CCNA2 Routing Perrine modified by Brierley Page 368/6/2015 Module 11 Interface e0 ip access-group 1 out access-list 1 deny 172.16.4.0 0.0.0.255 access-list 1 permit any What does this do? Standard ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

37. CCNA2 Routing Perrine modified by Brierley Page 378/6/2015 Module 11 Interface e0 ip access-group 1 out access-list 1 deny 172.16.4.0 0.0.0.255 access-list 1 permit any Denies traffic from the subnet, 172.16.4.0 & allows all other traffic thru e0 to network 172.16.3.0. Standard ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

38. CCNA2 Routing Perrine modified by Brierley Page 388/6/2015 Module 11 Criteria: checks both the packet’s source & destination addresses check for specific protocol check for specific port numbers permit or denied applications – pings, telnets, FTP, etc. ACL values range between 100 – 199 (for IP) Extended ACLs

39. CCNA2 Routing Perrine modified by Brierley Page 398/6/2015 Module 11 Port Numbers (decimal)IP Protocol 20FTP data [TCP] 21FTP program (control) [TCP] 23Telnet [TCP] 25Simple Mail Transport Protocol [TCP] (SMTP) 53DNS [TCP, UDP] 69TFTP [UDP] 80HTTP [TCP] Extended ACLs

40. CCNA2 Routing Perrine modified by Brierley Page 408/6/2015 Module 11 Router(config)# access-list { permit | deny } protocol source source-mask destination destination-mask operator operand {established} ACL number 100 – 199 permit | deny Packet is allowed or blocked protocol IP, TCP, UDP, ICMP, GRE or IGRP source -- Source address source- wildcard mask destination -- Destination address destination-w ildcard mask Extended ACLs Continued 

41. CCNA2 Routing Perrine modified by Brierley Page 418/6/2015 Module 11 Router(config)# access-list { permit | deny } protocol source source-mask destination destination-mask operator operand {established} operator lt, gt, eq, neq Operand Port number established Allows TCP traffic to pass if the packet uses an established connection ( for example, has ACK bits set ). access-list 101 permit tcp 172.16.4.0 0.0.0.255 any eq 25 Extended ACLs

42. CCNA2 Routing Perrine modified by Brierley Page 428/6/2015 Module 11 Configuring an extended ACL to an interface: Router(config-if)# ip access-group { in | out } Router(config)# int E0 Router(config-if)# ip access-group 101 in Extended ACLs

43. CCNA2 Routing Perrine modified by Brierley Page 438/6/2015 Module 11 Interface e0 ip access-group 101 access-list 101 deny tcp 172.16.4.0 0.0.0.255 172.16.3.0 0.0.0.255 eq 21 access-list 101 permit ip any any What does this do? Extended ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

44. CCNA2 Routing Perrine modified by Brierley Page 448/6/2015 Module 11 Interface e0 ip access-group 101 access-list 101 deny tcp 172.16.4.0 0.0.0.255 172.16.3.0 0.0.0.255 eq 21 access-list 101 permit ip any any Blocks FTP traffic from all hosts on 172.16.4.0 to any device on 172.16.3.0 & allows all other traffic. Extended ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

45. CCNA2 Routing Perrine modified by Brierley Page 458/6/2015 Module 11 Interface e0 ip access-group 101 access-list 101 deny tcp 172.16.4.0 0.0.0.255 172.16.3.0 0.0.0.255 eq 23 access-list 101 permit ip any any What does this do? Extended ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

46. CCNA2 Routing Perrine modified by Brierley Page 468/6/2015 Module 11 Interface e0 ip access-group 101 access-list 101 deny tcp 172.16.4.0 0.0.0.255 172.16.3.0 0.0.0.255 eq 23 access-list 101 permit ip any any Denies only telnet traffic from 172.16.4.0 to 172.16.3.0 network, and permits all other traffic thru e0 to any address. Extended ACLs 172.16.3.0172.16.4.0 Non-172.16.0.0 e0e1 s0 172.16.4.13 server

47. CCNA2 Routing Perrine modified by Brierley Page 478/6/2015 Module 11Extended/Standard ACL numbers for IP NOTE: Standard ACL numbers: 1-99; 1300-1999 Extended ACL numbers: 100-199; 2000-2699

48. CCNA2 Routing Perrine modified by Brierley Page 488/6/2015 Module 11 Standard/Extended ACL You can not add ACL statements into the body of the access-list (ONLY at the end of the list). Otherwise the access list must be deleted first, and then rewritten. Therefore it is prudent to write your access-list in text format using “notepad”, and then transfer it to your router.

49. CCNA2 Routing Perrine modified by Brierley Page 498/6/2015 Module 11 Configuring Named ACLs NOTE: A NAMED ACL is an alphanumeric string instead of the ACL number (1 - 199 ) NAMED ACLs are not compatible with Cisco IOS release prior to Release 11.2 Named ACLs can be used for either standard & extended You cannot configure the same name for multiple ACLs. use Name ACL when you want to intuitively identify ACLs use Name ACL when you have more than 99 standard & 100 extended ACLs have been configured on a router for a given protocol

50. CCNA2 Routing Perrine modified by Brierley Page 508/6/2015 Module 11 Configuring Named ACLs Router(config)# ip access-list { standard | extended } name { deny | permit } { commands } ip access-list standard internetfilter deny 172.10.15.0 0.0.0.255 permit 128.88.0.0 0.0.255.255 permit 36.0.0.0 0.0.255.255 ip access-list extended marketing-group permit tcp any 171.69.0.0 0.255.255.255 eq telnet deny udp any 171.69.0.0 0.255.255.255 lt 1024

51. CCNA2 Routing Perrine modified by Brierley Page 518/6/2015 Module 11 Named ACL A named ACL will allow the deletion of statements, but will only allow for the statements to be inserted a the end of the list.

52. CCNA2 Routing Perrine modified by Brierley Page 528/6/2015 Module 11 More Details access-list 1 permit 172.16.0.0 0.0.255.255 10101100.00010000.00000000.00000000 00000000.00000000.xxxxxxxx. xxxxxxxx 10101100.00010000.xxxxxxxx. xxxxxxxx Matched value Incoming packet with address of 172.18.4.2. Will it be permitted? Source : 10101100.00010010.00000100.00000010 Wildcard mask: 00000000.00000000.xxxxxxxx. xxxxxxxx 10101100.00010010.xxxxxxxx. xxxxxxxx Result

53. CCNA2 Routing Perrine modified by Brierley Page 538/6/2015 Module 11 access-list 1 permit 172.16.0.0 0.0.255.255 10101100.00010000.00000000.00000000 00000000.00000000.xxxxxxxx. xxxxxxxx 10101100.00010000.xxxxxxxx. xxxxxxxx Match value Incoming packet with address of 172.18.4.2. Will it be permitted? Source : 10101100.00010010.00000100.00000010 Wildcard mask: 00000000.00000000.xxxxxxxx. xxxxxxxx 10101100.00010010.xxxxxxxx. xxxxxxxx Result Does the result equal the match value? No! Hence the incoming packet will not be permitted.

54. CCNA2 Routing Perrine modified by Brierley Page 548/6/2015 Module 11 access-list 1 permit 172.16.0.0 0.0.255.255 10101100.00010000.00000000.00000000 00000000.00000000.xxxxxxxx. xxxxxxxx 10101100.00010000.xxxxxxxx. xxxxxxxx Match value Incoming packet with address of 172.16.4.2. Will it be permitted? Source : 10101100.00010000.00000100.00000010 Wildcard mask: 00000000.00000000.xxxxxxxx. xxxxxxxx 10101100.00010000.xxxxxxxx. xxxxxxxx Result Does the result equal the match value? Yes! Hence the incoming packet will be permitted.

55. CCNA2 Routing Perrine modified by Brierley Page 558/6/2015 Module 11 access-list 1 permit 172.16.0.0 0.0.255.254 10101100.00010000.00000000.00000000 00000000.00000000.xxxxxxxx. xxxxxxx0 10101100.00010000.xxxxxxxx. xxxxxxx0 Matched value Incoming packet with address of 172.16.4.1. Will it be permitted? Source : 10101100.00010000.00000100.00000001 Wildcard mask: 00000000.00000000. xxxxxxxx. xxxxxxx0 10101100.00010000.xxxxxxxx. xxxxxxx1 Result Incoming packet with address of 172.16.4.4. Will it be permitted? Source : 10101100.00010000.00000100.00000100 Wildcard mask: 00000000.00000000. xxxxxxxx. xxxxxxx0 10101100.00010000. xxxxxxxx. xxxxxxx0 Result

56. CCNA2 Routing Perrine modified by Brierley Page 568/6/2015 Module 11 access-list 1 permit 172.16.0.0 0.0.255.254 10101100.00010000.00000000.00000000 00000000.00000000.xxxxxxxx. xxxxxxx0 10101100.00010000.xxxxxxxx. xxxxxxx0 Matched value Incoming packet with address of 172.16.4.5. Will it be permitted? Source : 10101100.00010000.00000100.00000101 Wildcard mask: 00000000.00000000.xxxxxxxx. xxxxxxx0 10101100.00010000.xxxxxxxx. xxxxxxx1 Result So the access list perform what operation? Permits 172.16.4.4, and denies 172.16.4.1 and 172.16.4.5 Permits all even addresses from the network 172.16.0.0

57. CCNA2 Routing Perrine modified by Brierley Page 578/6/2015 Module 11 Permit/Deny BLOCKS of addresses One can permit or deny a block of addresses. However, the blocks must be a power of 2! (Example, 2, 4, 8, 16, 32, 64, 128, etc.) When you need to specify a range of addresses, you choose the closet block size for your needs. You want to block access to part of network that is in the range from 198.16.99.0 through 198.16.99.7. This is a block size of 8. Hence: 198.16.99.0 0.0.0.7 Also in this case for a block of 8, the beginning address must either start at 0, 8, 16, etc.

58. CCNA2 Routing Perrine modified by Brierley Page 588/6/2015 Module 11 One has a subnet whose addresses range from 200.17.2.128 to 200.17.2.191. One wants to divide this network so the top half are permitted and the bottom half is denied to any other network. What is the access lists? The block range is: 64 What is the access-list for the bottom? access-list 101 deny ip 200.17.2.128 0.0.0.31 any What is the access-list for the top? access-list 101 permit ip 200.17.2.160 0.0.0.31 any Permit/Deny BLOCKS of addresses

59. CCNA2 Routing Perrine modified by Brierley Page 598/6/2015 Module 11 What does this do? access-list 10 deny 200.16.88.64 0.0.0.63 Denies a block of 64 address starting at 200.16.88.64 Permit/Deny BLOCKS of addresses

60. CCNA2 Routing Perrine modified by Brierley Page 608/6/2015 Module 11 Virtual Terminal ACL You can control access via the VTY ports controlling telnet sessions coming into the router. You write the ACL as usual, but use access-class to apply it. As an example: Router(config t)# access-list 1 permit 172.16.1.0 0.0.0.255 Router(config t)# line vty 0 4 Router(config-line)# login Router(config-line)# password cisco Router(config-line)# access-class 1 in Note: only numbered access lists can be applied to VTY virtual lines!

61. CCNA2 Routing Perrine modified by Brierley Page 618/6/2015 Module 11 Established option The ‘establish’ option in an access-list used only with TCP datagrams. There are cases when you want to stop host B from initiating a connection with a host A while permitting A to initiate connections with B. establish response establish A B

62. CCNA2 Routing Perrine modified by Brierley Page 628/6/2015 Module 11 Allow host 172.16.3.13 with Internet connection, but don’t allow the internet to initialize any sessions. 172.16.3.0 172.16.4.0 e0 e1 172.16.3.13 INTERNET As a practical example: Established option

63. CCNA2 Routing Perrine modified by Brierley Page 638/6/2015 Module 11 Router(config)# int e1 Router(config-if)# ip access-group 101 in Router(config)# access-list 101 permit tcp any 172.16.3.0 0.0.255.255 established Established option 172.16.3.0 172.16.4.0 e0 e1 172.16.3.13 INTERNET

64. CCNA2 Routing Perrine modified by Brierley Page 648/6/2015 Module 11 Router(config)# int e1 Router(config-if)# ip access-group 101 in Router(config)# access-list 101 permit tcp any host 172.16.3.13 eq www established Established option 172.16.3.0 172.16.4.0 e0 e1 172.16.3.13 INTERNET

65. CCNA2 Routing Perrine modified by Brierley Page 658/6/2015 Module 11 Router(config)# int e1 Router(config-if)# ip access-group 101 in Router(config)# access-list 101 permit tcp any 172.16.3.0 0.0.0.255 eq www established Router(config)# access-list 101 permit icmp any any Router(config)# access-list 101 permit udp any any eq 53 Note: established argument is limited to tcp which means UDP, ICMP and all other IP protocols will not match, and will be denied, unless specifically allowed. Hence Established option 172.16.3.0 172.16.4.0 e0 e1 172.16.3.13 INTERNET

66. CCNA2 Routing Perrine modified by Brierley Page 668/6/2015 Module 11 Where to Place ACLs? ACL Rules: Standard ACL Place the ACL as near the destination as possible. Extended ACL Put the ACL as close as possible to the source

67. CCNA2 Routing Perrine modified by Brierley Page 678/6/2015 Module 11 Access Lists Standard Extended End of Session