Presentation is loading. Please wait.

Presentation is loading. Please wait.

Low-GWP options for cascade systems for medium-sized and larger commercial refrigeration equipment Workshop on HFC management Bangkok 20 th April 2015.

Similar presentations


Presentation on theme: "Low-GWP options for cascade systems for medium-sized and larger commercial refrigeration equipment Workshop on HFC management Bangkok 20 th April 2015."— Presentation transcript:

1 Low-GWP options for cascade systems for medium-sized and larger commercial refrigeration equipment Workshop on HFC management Bangkok 20 th April 2015 Paul de Larminat

2 Benchmark in supermarkets: direct systems (« D-X ») The need: 2 temperature levels for goods: - « MT » 0 to +8°C for fresh goods  Evaporation -10 to -15°C - « LT » -18 to -25 for frozen food  Evaporation -35 to -38 Non toxic / non flammable (A1) fluids desired inside shop. Traditionally used fluids: - CFC’s: R12 for MT; R-502 for LT - Transition: HCFC R-22 for both stages - HFC: 404A dominant for both stages Usually single stage 75 to 80% of the charge in « MT » circuit. High leak rates + very high GWP = Large CO 2eq emissions

3 High pumping power + Additional heat exchangers = bad efficiency Indirect systems Unsatisfactory options Glide  poor efficiency in extended systems Still high GWP for A1 (about 2000) Same direct system With lower GWP blend Like R-407A etc  Poor TEWI In both cases

4 An possible alternative: cascade LT CO2 + MT chiller For LT: D-X CO2 system - Only CO2 (or brine) in sales area. - Excellent efficiency of CO2 at LT. - Moderate pressure for CO2 For MT: glycol chiller about -10°C. Glycol is used: - For fresh goods with indirect system, - For condensation of the LT CO2 circuit. Advantages: - The fluid of the chiller is easily optimized to the climate conditions; e.g. R-134a or equivalent HFO or blend in warm climate. - The chiller can be low cost, standard (or close to) A/C chillers. - Refrigerant charge and leak rate of chillers is low  low direct emissions (about 1% of « benchmark » D-X 404A). -A1 fluid not an obligation for the chiller (confined in machine room). -If retrofit is needed later, replacing the chiller only is limited damage. Other options for MT circuit are possible. The key is to use CO2 for LT.


Download ppt "Low-GWP options for cascade systems for medium-sized and larger commercial refrigeration equipment Workshop on HFC management Bangkok 20 th April 2015."

Similar presentations


Ads by Google