Presentation is loading. Please wait.

Presentation is loading. Please wait.

Foundations of Network and Computer Security J J ohn Black Lecture #16 Oct 5 th 2007 CSCI 6268/TLEN 5831, Fall 2007.

Similar presentations


Presentation on theme: "Foundations of Network and Computer Security J J ohn Black Lecture #16 Oct 5 th 2007 CSCI 6268/TLEN 5831, Fall 2007."— Presentation transcript:

1 Foundations of Network and Computer Security J J ohn Black Lecture #16 Oct 5 th 2007 CSCI 6268/TLEN 5831, Fall 2007

2 Announcements Martin has Quiz #2 graded and available No further quizzes before the midterm Project #0 is on the web page –Should have enough info by today to get started on it

3 OpenSSL enc command openssl enc -ciphername [-in filename] [-out filename] [-pass arg] [-e] [-d] [-a] [-K key] [-iv IV] [-p] [-P] -ciphername can be –des-ecb (yuk!), des-cbc (hmm), des (same as des- cbc), des-ede3-cbc, des3 (same), aes-128-cbc, bf, cast, idea, rc5 –Can omit the ‘enc’ command if specifying these… –Encrypt with –e –Decrypt with –d –K and IV are obvious

4 Passphrase-Based enc Passphras e hash function AES-128- CBC iv, key (128 bits each) salt ciphertext Things to think about: How to decrypt? Is the IV needed in the ciphertext? Is the passphrase safe even though the salt and iv are known? plaintext

5 So How to Encrypt Let’s encrypt the file ‘test’ % cat test hi there % openssl aes-128-cbc -in test enter aes-128-cbc encryption password: Verifying - enter aes-128-cbc encryption password: Salted__mTR&Qi¦¹K¯¿Óàg&5&kE What’s up with the garbage? –Of course the AES outputs aren’t ASCII! –Use –base64 option

6 base64 This is an encoding scheme (not cryptographic) –Translates each set of 6 bits into a subset of ASCII which is printable –Makes ‘garbage’ binary into printable ASCII Kind of like uuencode –Of course this mapping is invertible –For encryption we want to do this after we encrypt –For decryption, we undo this before we decrypt –This is the –a flag for ‘enc’ but –base64 works as well and is preferable

7 Example: base64 Let’s encrypt file ‘test’ again, but output readable ciphertext % openssl aes-128-cbc -in test -base64 enter aes-128-cbc encryption password: Verifying - enter aes-128-cbc encryption password: U2FsdGVkX1/tdjfZnPrD+mSjBBO7InU8Mo4ttzTk8eY= We’ll always use this option when dealing with portability issues –Like sending ciphertext over email

8 Decrypting The command to decrypt is once again ‘enc’ –This makes no sense; get used to it –Use the –d flag to tell enc to decrypt –Let’s decrypt the string U2FsdGVkX1/tdjfZnPrD+mSjBBO7InU8Mo4ttzTk8eY= which I’ve placed into a file called ‘test.enc’ % openssl enc -d -in test.enc U2FsdGVkX18FZENOZFZdYvLoqPdpRTgZw2CZIQs6bMQ=

9 Hunh? It just gave back the ciphertext?! –We didn’t specify an encryption algorithm –Default is the identity map (get used to it) –Let’s try again % openssl aes-128-cbc -d -in test.enc enter aes-128-cbc decryption password: bad magic number Ok, now what’s wrong?

10 Error messages not useful We forgot to undo the –base64 –The error msg didn’t tell us that (get used to it) –One more try: % openssl aes-128-cbc -d -in test.enc -base64 enter aes-128-cbc decryption password: hi there –It was all worth it, right? –Now it’s your turn

11 Project #0 I’ll give you a ciphertext, you find the password –Password is a three-letter lowercase alpha string –Main purpose is to get you to figure out where openssl lives on your computer(s) –Don’t do it by hand –Full description on our web page Due Oct 19 th, in class

12 Back to SSL/TLS SSL –Secure Socket Layer Designed by Paul Kocher, consulting for Netscape TLS –Transport Layer Security New version of SSL, and probably what we should call it (but I’m used to SSL) Used for web applications (https) –But also used many other places that aren’t as well-known

13 TLS – Sketch Let’s start by trying to design TLS ourselves and see what else we’ll need –This will end up being only a sketch of the very complex protocol TLS actually is We want: –Privacy, authentication –Protection against passive and active adversaries We have: –Symmetric/asymmetric encryption and authentication –Collision-resistant hash functions

14 A First Stab First we need a model –Client/Server is the usual one –Client and Server trust each other –No shared keys between client and server Assuming a shared key is not realistic in most settings –Adversary is active (but won’t try DoS) Server generates RSA key pair for encryption –pk S, sk S –S subscript stands for “Server”

15 A First Stab (cont) Now client C comes along and wants to communicate with server S –C sends SSL HELLO to initiate session –S responds by sending pk S –C sends credit card number encrypted with pk S –S decrypts credit card number with sk S and charges the purchase What’s wrong here?

16 Our First Protocol: Problems There are tons of problems here –We don’t know how to encrypt {0,1} *, only how to encrypt elements of Z n * Ok, say we solve that problem (there are ways) –It’s really SLOW to use RSA on big messages Ok, we mentioned this before… let’s use symmetric cryptography to help us –There is no authentication going on here! Adversary could alter pk S on the way to the client We’d better add some authentication too Let’s try again…

17 Second Stab C says Hello S sends pk S to C C generates two 128-bit session keys –K enc, K mac, used for encryption and MACing C encrypts (K enc, K mac ) with pk S and sends to S S recovers (K enc, K mac ) using sk S and both parties use these “session keys” to encrypt and MAC all further communication

18 Second Stab (cont) Problems? –Good news: we’re a lot more efficient now since most crypto is done with symmetric key –Good news: we’re doing some authentication now –Bad news: Man-in-the-Middle attack still possible –Frustratingly close If we could get pk S to the client, we’d be happy

19 Man in the Middle Let’s concretely state the problem –Suppose an adversary A generates pk A and sk A –Now S sends pk S to C, but A intercepts and sends pk A to C instead –C responds with (K enc, K mac ) encrypted under pk A and sends to S –A intercepts, decrypts (K enc, K mac ) using sk A and re- encrypts with pk S then sends on to S A doesn’t have to use (K enc, K mac ) here… any keys would do –Idea is that A proxies the connection between C and S and reads/alters any traffic he wishes

20 MitM Attack C AS hello pk S pk A (K enc, K mac ) under pk A (K enc, K mac ) under pk S “Welcome” under (K enc, K mac ) CC# under (K enc, K mac ) “Welcome” under (K enc, K mac ) CC# under (K enc, K mac )

21 How do we Stop This? Idea: –Embed pk S in the browser A cannot impersonate S if the public key of S is already held by C Problems: –Scalability (100,000 public keys in your browser?) –Key freshening (if a key got compromised and it were already embedding in your browser, how would S update?) –New keys (how do you get new keys? A new browser?) –Your crypto is only as reliable as the state of your browser (what if someone gets you to install a bogus browser?) (Partial) Solution: Certificates

22 Certificates: Basic Idea Enter the “Certification Authority” (CA) –Some trusted entity who signs S’s public key Well-known ones are Verisign, RSA Let’s assume the entity is called “CA” CA generates keys vk CA and sk CA CA signs pk S using sk CA CA’s vk S is embedded in all browsers –Same problem with corrupted browsers as before, but the scaling problem is gone

23 New Protocol C sends Hello S sends pk S and the signature of CA on pk S –These two objects together are called a “certificate” C verifies signature using vk CA which is built in to his browser C generates (K enc, K mac ), encrypts with pk S and sends to S S decrypts (K enc, K mac ) with sk S Session proceeds with symmetric cryptography

24 SSH (A Different Model) SSH (Secure SHell) –Replacement for telnet –Allows secure remote logins Different model –Too many hosts and too many clients –How to distribute pk of host? –Can be done physically –Can pay a CA to sign your keys (not likely) –Can run your own CA More reasonable, but still we have a bootstrapping problem

25 SSH: Typical Solution The most common “solution” is to accept initial exposure –When you connect to a host for the first time you get a warning: “Warning: host key xxxxxx with fingerprint xx:xx:xx is not in the.ssh_hosts file; do you wish to continue? Saying yes may allow a man-in-the-middle attack.” (Or something like that) You take a risk by saying “yes” If the host key changes on your host and you didn’t expect that to happen, you will get a similar warning –And you should be suspicious

26 Key Fingerprints The key fingerprint we just saw was a hash of the public key –Can use this when you’re on the road to verify that it’s the key you expect Write down the fingerprint on a small card and check it When you log in from a foreign computer, verify the fingerprint –Always a risk to log in from foreign computers!

27 X.509 Certificates X.509 is a format for a certificate –It contains a public key (for us, at least), email address, and other information –In order to be valid, it must be signed by the CA –In this class, our grader Martin, will be the CA


Download ppt "Foundations of Network and Computer Security J J ohn Black Lecture #16 Oct 5 th 2007 CSCI 6268/TLEN 5831, Fall 2007."

Similar presentations


Ads by Google