Presentation is loading. Please wait.

Presentation is loading. Please wait.

US DEMO MS FW / Blanket Assessment Blanket Design Concepts Prepared by Paul Fogarty, Siegfried Malang Mo Dagher With contributions from the US MS DEMO.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "US DEMO MS FW / Blanket Assessment Blanket Design Concepts Prepared by Paul Fogarty, Siegfried Malang Mo Dagher With contributions from the US MS DEMO."— Presentation transcript:

1 US DEMO MS FW / Blanket Assessment Blanket Design Concepts Prepared by Paul Fogarty, Siegfried Malang Mo Dagher With contributions from the US MS DEMO team UCLA Feb 24 2004

2 Outboard Blanket Coolant Concepts – Midplane Cross Sections

3 Mid Plane section View DC – FLiBe + Be OutBoard Blanket

4 Helium Flows Helium Flows 3D Model DC – FLiBe + Be Blanket Concept (typical He Flow Circuit for DC Blanket)

5 Top View – Close-up of Typical Helium Manifolds Helium Flow Helium Flow

6 Side View (Poloidal) DC – FLiBe + Be Cross Section Schematic

7 Mid Plane section View DC – FLiBe + Pb OutBoard Blanket

8 3D Model DC – FLiBe + Pb Blanket Concept

9 Side View (Poloidal) DC – FLiBe + Pb Cross Section Schematic

10 Plan View (Toroidal) FLiNaBe Midplane Cross Section Schematic

11

12

13 FLINaBe Out 2 3 1 3 FLINaBe In Side View (Poloidal) Self-cooled – FLiNaBe Cross Section Schematic

14 Design Considerations Full Length Module design, more detail work is needed to resolve certain design issues such as: –Header design at the Top of the module that allows proper flow distribution. –Collector design in the Bottom with facilities for all coolant and breeder Flows He Inlet/Oulet for DC concept Flibe Inlet/Outlet for DC-Be and Pb concept Pb inlet/outlet for DC-Pb concept FLiNaBe flow circuit for Self cooled concept –Module structural support –Fabrication, Assembly and installation issues –Maintenance and replacement issues, accessibility and handling Molten Salt Design requirements for Blanket Modules and ancillary systems –Module Pre-Heating during startup, Min. Temp control during operation, Idle conditions and shut down process. –Molten Salt Drainage from Blanket module during shut down. –Ancillary and piping system design, trace heating, heat exchangers and pre- heating systems etc…

Download ppt "US DEMO MS FW / Blanket Assessment Blanket Design Concepts Prepared by Paul Fogarty, Siegfried Malang Mo Dagher With contributions from the US MS DEMO."

Similar presentations

First Wall Heat Loads Mike Ulrickson November 15, 2014.

First Wall Heat Loads Mike Ulrickson November 15, 2014.
April 23-24, 2009/ARR 1 Proposed Effort Over the Next 1-2 Years on ARIES-DB DCLL A. René Raffray, Siegfried Malang, Xueren Wang University of California,

April 23-24, 2009/ARR 1 Proposed Effort Over the Next 1-2 Years on ARIES-DB DCLL A. René Raffray, Siegfried Malang, Xueren Wang University of California,
Thermo Fluid Design Analysis of TBM cooling schemes M. Narula with A. Ying, R. Hunt, S. Park ITER-TBM Meeting UCLA Feb 14-15, 2007.

Thermo Fluid Design Analysis of TBM cooling schemes M. Narula with A. Ying, R. Hunt, S. Park ITER-TBM Meeting UCLA Feb 14-15, 2007.
What is Dual Coolant Blanket? Siegfried Malang 2 nd EU-US DCLL Workshop2 nd EU-US DCLL Workshop University of California,University of California, Los.

What is Dual Coolant Blanket? Siegfried Malang 2 nd EU-US DCLL Workshop2 nd EU-US DCLL Workshop University of California,University of California, Los.
Coolant Connections to the DCLL Blanket S. Malang, Dara Navaei, Xueren Wang ARIES Project MeetingARIES Project MeetingUCSD January 23-24, 2012January 23-24,

Coolant Connections to the DCLL Blanket S. Malang, Dara Navaei, Xueren Wang ARIES Project MeetingARIES Project MeetingUCSD January 23-24, 2012January 23-24,
Presented by: S. Suzuki, Blanket Engineering Lab., Japan Atomic Energy Research Institute, JAERI Contents 1.Outline of blanket development in JAERI 2.Design.

Presented by: S. Suzuki, Blanket Engineering Lab., Japan Atomic Energy Research Institute, JAERI Contents 1.Outline of blanket development in JAERI 2.Design.
Progress on the Configuration Design of the Fusion Power Core for the ACT (Draft) X.R. Wang M.S. Tillack S. Malang Sept. 29, 2011.

Progress on the Configuration Design of the Fusion Power Core for the ACT (Draft) X.R. Wang M.S. Tillack S. Malang Sept. 29, 2011.
First Wall Thermal Hydraulics Analysis El-Sayed Mogahed Fusion Technology Institute The University of Wisconsin With input from S. Malang, M. Sawan, I.

First Wall Thermal Hydraulics Analysis El-Sayed Mogahed Fusion Technology Institute The University of Wisconsin With input from S. Malang, M. Sawan, I.
September 3-4, 2003/ARR 1 Initial Assessment of Maintenance Scheme for 2- Field Period Configuration A. R. Raffray X. Wang University of California, San.

September 3-4, 2003/ARR 1 Initial Assessment of Maintenance Scheme for 2- Field Period Configuration A. R. Raffray X. Wang University of California, San.
Fusion Neutronics Activities in USA Reported for the Neutronics Groups at UCLA, UW, and TSI Research, Inc. by E.T. Cheng TSI Research, Inc. P.O. Box 2754.

Fusion Neutronics Activities in USA Reported for the Neutronics Groups at UCLA, UW, and TSI Research, Inc. by E.T. Cheng TSI Research, Inc. P.O. Box 2754.
Status of the Modular and Field- Period Replacement Maintenance Presented by X.R. Wang Contributors: S. Malang, A.R. Raffray and L. El-Guebaly ARIES Meeting.

Status of the Modular and Field- Period Replacement Maintenance Presented by X.R. Wang Contributors: S. Malang, A.R. Raffray and L. El-Guebaly ARIES Meeting.
January 11-13, 2005/ARR 1 Ceramic Breeder Blanket Coupled with Brayton Cycle Presented by: A. R. Raffray (University of California, San Diego) With contributions.

January 11-13, 2005/ARR 1 Ceramic Breeder Blanket Coupled with Brayton Cycle Presented by: A. R. Raffray (University of California, San Diego) With contributions.
US ITER TBM DCLL TBM Design, Analysis and Development C. Wong, M. Dagher, S. Smolentsev and S. Malang FNS/TBM Meeting UCLA, September 19-20, 2007.

US ITER TBM DCLL TBM Design, Analysis and Development C. Wong, M. Dagher, S. Smolentsev and S. Malang FNS/TBM Meeting UCLA, September 19-20, 2007.
ARIES Meeting General Atomics, February 25 th, 2005 Brad Merrill, Richard Moore Fusion Safety Program Pressurization Accidents in ARIES-CS.

ARIES Meeting General Atomics, February 25 th, 2005 Brad Merrill, Richard Moore Fusion Safety Program Pressurization Accidents in ARIES-CS.
The shield block is a modular system made up of austenitic steel SS316 LN-IG whose main function is to provide thermal and nuclear shielding of outer components.

The shield block is a modular system made up of austenitic steel SS316 LN-IG whose main function is to provide thermal and nuclear shielding of outer components.
Status of the Power Core Configuration Based on Modular Maintenance Presented by X.R. Wang Contributors: S. Malang, A.R. Raffray and the ARIES Team ARIES.

Status of the Power Core Configuration Based on Modular Maintenance Presented by X.R. Wang Contributors: S. Malang, A.R. Raffray and the ARIES Team ARIES.
November 4-5, 2004/ARR 1 ARIES-CS Power Core Options for Phase II and Focus of Engineering Effort A. René Raffray University of California, San Diego ARIES.

November 4-5, 2004/ARR 1 ARIES-CS Power Core Options for Phase II and Focus of Engineering Effort A. René Raffray University of California, San Diego ARIES.
December 3-4, 2003/ARR,1 1 ARIES-CS Engineering Approach Presented by A. R. Raffray University of California, San Diego L. El-Guebaly S. Malang D. K.

December 3-4, 2003/ARR,1 1 ARIES-CS Engineering Approach Presented by A. R. Raffray University of California, San Diego L. El-Guebaly S. Malang D. K.
Maintenance Schemes For ARIES-CS X.R. Wang a S. Malang b A.R. Raffray a and the ARIES Team a University of California, San Diego, 9500 Gilman Drive, La.

Maintenance Schemes For ARIES-CS X.R. Wang a S. Malang b A.R. Raffray a and the ARIES Team a University of California, San Diego, 9500 Gilman Drive, La.
Fusion Technology Institute Department of Engineering Physics, University of Wisconsin-Madison INS 1 Solid Wall Recirculating Blanket: Geometry, Materials.

Fusion Technology Institute Department of Engineering Physics, University of Wisconsin-Madison INS 1 Solid Wall Recirculating Blanket: Geometry, Materials.

Similar presentations

Ads by Google