Presentation is loading. Please wait.

Presentation is loading. Please wait.

Status report on Step1 of Task A, DECOVALEX-2011 modeling for Ventilation Experiment –modeling for Ventilation Experiment By Xiaoyan Liu, Chengyuan Zhang.

Published by Modified over 8 years ago

Similar presentations

Presentation on theme: "Status report on Step1 of Task A, DECOVALEX-2011 modeling for Ventilation Experiment –modeling for Ventilation Experiment By Xiaoyan Liu, Chengyuan Zhang."— Presentation transcript:

1 Status report on Step1 of Task A, DECOVALEX-2011 modeling for Ventilation Experiment –modeling for Ventilation Experiment By Xiaoyan Liu, Chengyuan Zhang and Quansheng Liu Wuhan Institute of Rock and Soil Mechanics Chinese Academy of Sciences (CAS) April 20-23, 2009 G, Korea DECOVALEX 2011 Task A Force Meeting

2  Step 0: Identification of relevant processes and of Opalinus Clay parameters. Modelling of the laboratory drying test.  Step 1: Hydromechanical modelling up to the end of Phase 1.  Step 2: Hydromechanical modelling up to the end of Phase 2 using parameters backcalculated from step 1. Advanced features as permeability anisotropy, rock damage and permeability increase in the damaged zone may be considered.  Step 3: Hydromechanical and geochemical modelling of the full test. Conservative transport and one species considered.  Step 4: Hydromechanical and geochemical modelling of the full test. Reactive transport and full geochemical model (optional). Task A Research programme

3 Ventilation Experiment step 0 to 1 1.To consider coupled hydro-mechanical processes (swell & shrinkage effect) Step 1 General model description

4  General model description  Governing Equations  Step 1 Simulation results  Conclusion  Discussion  Future work Outline

5 Based on three interacting continua General model description of multiphase system: Liquid phase Gas phase Vapour Dry air Phase exchange Water

6 Governing Equations For liquid phase exchange (evaporation or precipitation) change volume change (retention curve) advection

7 Governing Equations For vapour change volume change Klinkenberg parameter phase exchange ordinary diffusion Slip Knudsen effect advection compressibility retention curve

8 Governing Equations For dry air No phase exchange Coupling scheme of Flow model (1)Phase exchange (2)Saturation-Suction (3)Different mobility (advection and diffusion effects) of two gas

9 Governing Equations For solid deformation Porous pressure saturation and heat dilatancy

10 Step 1 modelling Geometry, Grid Design and Boundary Conditions Experimental condition in MT test section 200m 34 5 m 10 0m 18 9m 1.3m Groundwater table MicroTun nel

11 Step 1 modelling Geometry, Grid Design and Boundary Conditions Experimental condition in MT test section These four Boundaries:

12 Step 1 modelling Geometry, Grid Design and Boundary Conditions Experimental condition in MT test section No Water flow

13 Step 1 modeling Experimental Conditions Experimental condition in MT test section

14 Step 1 Variables & Parameters used in simulation (Munoz, 2003) 0.40 (in our work) 0.165 Hydraulic properties: Variables & Parameters in Step 0

15 ParameterValue Solid grain density Kg/m 3 2710 Moisture swelling coeff. [-] 0.11*10 -4 Poisson ratio [-] 0.27 Young ’ s Modulus [GPa] 6 Mechanical and hydro-mechanical properties: Step 1 Variables & Parameters used in simulation

16 Step 1 Simulation results 342 days experimental data of ventilation condition and simulation results of RH

17 Step 1 Simulation results Evolution of calculated rock outflow flux

18 Step 1 Simulation results accumulated water mass out of rock wall

19 Step 1 Simulation results Calculated total accumulated water mass out of rock wall during Phase 1 and its comparison with the monitored data in desaturation period

20 Step 1 Simulation results Simulation results for evolution of porous water pressure

21 Step 1 Simulation results Simulation results for evolution of calculated water pressure in some locations around the test section (distance of 0.65m, 0.67m, 1.3m, 2m, 3m and 5 m from MT center)

22 Step 1 Simulation results Simulation results for evolution of water saturation in rock near MT 2002.7.5 2002.7.28 2003.5.28 2003.9.24

23 Step 1 Simulation results Simulation results for evolution of water saturation in rock near MT 2004.1.26

24 Step 1 Simulation results Rock displacements around the test tunnel after excavation

25 Conclusion  Simulation on the ventilation experiment of Step 1 seems good.  In the work of Step 0 &Step 1, getting started and familiarize with the problem developing our simulation models and numerical code conducting a comparative analysis of coupled (T)H and (T)HM modelling making comparison with experimental observations making comparison with other teams’ calculation results  We must do more calibration and benchmark test on our model, especially to make sure the parameters are correct and model work well.

26 Discussion  Results are very sensitive to intrinsic permeability, relative permeability and capillary pressure.  Detailing input information for model is important, e.g. parameters of properties, initial and boundary conditions.  Sensitivity analysis of vapor diffusion, permeability, permeability saturation dependence, retention curve will be benefit to improving models for complex coupled problem.

27 Future work 1.Damage and microcracking due to hydromechanical and chemical effects should be involved in modeling work. 2.We should improve our model to deal with heterogeneous permeability field and to consider the anisotropical evolution of permeability induced by rock damage. 3.After the 3rd workshop, we will start work for the Step 2 to perform an advanced hydromechanical modelling up to the end of Phase 2 using parameters back- calculated from step 1.

28 Thank you for your attention

Download ppt "Status report on Step1 of Task A, DECOVALEX-2011 modeling for Ventilation Experiment –modeling for Ventilation Experiment By Xiaoyan Liu, Chengyuan Zhang."

Similar presentations

Hongjie Zhang Purge gas flow impact on tritium permeation Integrated simulation on tritium permeation in the solid breeder unit FNST, August 18-20, 2009.

Hongjie Zhang Purge gas flow impact on tritium permeation Integrated simulation on tritium permeation in the solid breeder unit FNST, August 18-20, 2009.
Numerical simulations of oil contaminant transport in sandy coastal aquifers Presenter ： Yi-Ming Wei Adviser ： Chuen-Fa Ni Date ： 2011/04/21.

Numerical simulations of oil contaminant transport in sandy coastal aquifers Presenter ： Yi-Ming Wei Adviser ： Chuen-Fa Ni Date ： 2011/04/21.
Quantitative characterization of the pore network of a macroporous soil using µ X-ray CT Sofie Herman, department of Land Management, K.U. Leuven

Quantitative characterization of the pore network of a macroporous soil using µ X-ray CT Sofie Herman, department of Land Management, K.U. Leuven
Conductivity Testing of Unsaturated Soils A Presentation to the Case Western Reserve University May 6, 2004 By Andrew G. Heydinger Department of Civil.

Conductivity Testing of Unsaturated Soils A Presentation to the Case Western Reserve University May 6, 2004 By Andrew G. Heydinger Department of Civil.
Jan – Dec, 2006 University of Alaska – Fairbanks Pacific Northwest National Laboratory British Petroleum Exploration Alaska Injection of CO 2 for Recovery.

Jan – Dec, 2006 University of Alaska – Fairbanks Pacific Northwest National Laboratory British Petroleum Exploration Alaska Injection of CO 2 for Recovery.
STABILITY ANALYSIS IN PRESENCE OF WATER Pore pressures Rainfall Steady state flow and transient flow.

STABILITY ANALYSIS IN PRESENCE OF WATER Pore pressures Rainfall Steady state flow and transient flow.
Lecture Objectives -Finish with modeling of PM -Discuss -Advance discretization -Specific class of problems -Discuss the CFD software.

Lecture Objectives -Finish with modeling of PM -Discuss -Advance discretization -Specific class of problems -Discuss the CFD software.
MUTAC Review April 6-7, 2009, FNAL, Batavia, IL Mercury Jet Target Simulations Roman Samulyak, Wurigen Bo Applied Mathematics Department, Stony Brook University.

MUTAC Review April 6-7, 2009, FNAL, Batavia, IL Mercury Jet Target Simulations Roman Samulyak, Wurigen Bo Applied Mathematics Department, Stony Brook University.
Numerical Simulations of Multi-Species Contaminant Transport in Variably Saturated Aquifers in Coastal Areas Presenter ： Yi-Ming Wei Adviser ： Chuen-Fa.

Numerical Simulations of Multi-Species Contaminant Transport in Variably Saturated Aquifers in Coastal Areas Presenter ： Yi-Ming Wei Adviser ： Chuen-Fa.
Ground-Water Flow and Solute Transport for the PHAST Simulator Ken Kipp and David Parkhurst.

Ground-Water Flow and Solute Transport for the PHAST Simulator Ken Kipp and David Parkhurst.
Subsurface Air Flow Air is a fluid (but not a liquid) that behaves similarly to water We see pressure changes in the subsurface due to barometric pressure.

Subsurface Air Flow Air is a fluid (but not a liquid) that behaves similarly to water We see pressure changes in the subsurface due to barometric pressure.
Introduction to the Ventilation Experiment (VE) and Task A B. Garitte and A. Gens (CIMNE – UPC) Dept. of Geotechnical Engineering and Geosciences TECHNICAL.

Introduction to the Ventilation Experiment (VE) and Task A B. Garitte and A. Gens (CIMNE – UPC) Dept. of Geotechnical Engineering and Geosciences TECHNICAL.
Summary of results to date B. Garitte and A. Gens 2nd DECOVALEX 2011 workshop, 20 th of October 2008, Wakkanai, Japan Dept. of Geotechnical Engineering.

Summary of results to date B. Garitte and A. Gens 2nd DECOVALEX 2011 workshop, 20 th of October 2008, Wakkanai, Japan Dept. of Geotechnical Engineering.
Introduction to the Task A Task Force Meeting B. Garitte and A. Gens 2nd DECOVALEX 2011 workshop, 20 th of October 2008, Wakkanai, Japan Dept. of Geotechnical.

Introduction to the Task A Task Force Meeting B. Garitte and A. Gens 2nd DECOVALEX 2011 workshop, 20 th of October 2008, Wakkanai, Japan Dept. of Geotechnical.
D2011 Project CEA-IRSN Results Alain MILLARD, Frédéric DELERUYELLE Wakkanai, Japan, October 20-23, 2008 Task A - STEPS 0/1.

D2011 Project CEA-IRSN Results Alain MILLARD, Frédéric DELERUYELLE Wakkanai, Japan, October 20-23, 2008 Task A - STEPS 0/1.
Interdisciplinary Modeling of Aquatic Ecosystems Curriculum Development Workshop July 18, 2005 Groundwater Flow and Transport Modeling Greg Pohll Division.

Interdisciplinary Modeling of Aquatic Ecosystems Curriculum Development Workshop July 18, 2005 Groundwater Flow and Transport Modeling Greg Pohll Division.
HYDRUS_1D Sensitivity Analysis Limin Yang Department of Biological Engineering Sciences Washington State University.

HYDRUS_1D Sensitivity Analysis Limin Yang Department of Biological Engineering Sciences Washington State University.
D2011 Project CEA-IRSN Results Alain MILLARD, Frédéric DELERUYELLE Gyeongju, Korea, April 20-23, 2009 Task A - STEPS 0/1.

D2011 Project CEA-IRSN Results Alain MILLARD, Frédéric DELERUYELLE Gyeongju, Korea, April 20-23, 2009 Task A - STEPS 0/1.
Current Status of CAS Team on Task A Step 0: Model Inception two-phase flowmodeling for the laboratory drying test – two-phase flow modeling for the laboratory.

Current Status of CAS Team on Task A Step 0: Model Inception two-phase flowmodeling for the laboratory drying test – two-phase flow modeling for the laboratory.
Mathematics of non-Darcy CO 2 injection into saline aquifers Ana Mijic Imperial College London Department of Civil and Environmental Engineering PMPM Research.

Mathematics of non-Darcy CO 2 injection into saline aquifers Ana Mijic Imperial College London Department of Civil and Environmental Engineering PMPM Research.

Similar presentations

Ads by Google