1. NIKON NPL-332 TOTAL STATION
CE 201
ENGINEERING SURVEYING

2. NIKON NPL-332 TOTAL STATION
SETUP INSTRUMENT:
Turn On
Rotate Alidade
Tilt Telescope

3. NIKON NPL-332 MEASUREMENT SETTINGS
MSR1 or MSR2
Hold down key for 1 sec
Target – N-Prism/Prism
Const – 30 mm
Mode – Normal/Precise
Ave – 0 to
Rec – Confirm/All/ MSR

4. NIKON NPL 332 INITIAL SETTINGS
MENU
3: Settings
1: Angle
VA Zero : Vert = 0
ANG Reso: 1”/5”/10”
HA: 0 to BS/AZIMUTH
2: Dist
Scale:
T-P: On
Sea Level: On
C&R: 0.132
3: Coord.
Cord.: NEZ/ENZ
Label: XYZ/YXZ/NEZ
AZ ZERO: North
4: Power
Main: OFF
EDM: OFF
Sleep: OFF
7: Units
Angle: DEG
Dist: US-FT
Input: decimal-Ft
Temp: degF
Press: inHg
8:Recording
9: Other Settings
XYZ disp
2nd Unit
Sig Beep
Split St.
CD Input
Owner Detail

5. NIKON NPL 332 HOT KEY: 1: HT - Input Height of Target
2: T-P - Input Temperature & Pressure
3: Target = Prism 30 mm - Prism Offset
4: Notes = 50 characters
BUBBLE INDICATOR: (0) KEY
Graphical Check

6. NIKON NPL 332 MEASURING DISTANCE Sight Target Press MSR1 or MSR2
if ave. count = 0, cont. measurement
if ave. count set to >0 , SDx
DISPLAY - DSP Key
toggle between displays:
1/4, 2/4, 3/4, 4/4

7. NIKON NPL 332 HORIZONTAL ANGLE ANGLE KEY 1: 0-Set 2: Input – ddd.mmss
3:Rept – angle repetitions
4:F1/F2 – Face Left/Right
5:Hold – hold horizontal angle

8. NIKON NPL 332 RDM: Remote Distance Measurement PROGRAMS (4 Key)
Indirect Distance Measurement
PROGRAMS (4 Key)
CONTINUOUS (4)

9. NIKON NPL 332 Remote Distance Measurement
Difference between “3:RDM(Radial)” & “4:RDM (Cont.)”

10. NIKON NPL 332 DISPLAY Sight 1st Pt Sight 2nd Pt MSR1 or MSR2
MAGNETIC AZIMUTH

11. NIKON NPL 332 REM: REMOTE ELEVATION MEASUREMENT PROGRAMS (4 Key)

12. NIKON NPL 332 REM: REMOTE ELEVATION Enter HT – Target Height
Sight Target
MSR1
Sight Vertical Point
Read Vh

13. NIKON NPL 332 JOB SETUP MENU 1: JOB OPEN EXISTING JOB - enterOr
CREATE NEW JOB
8 Characters - GRP #
Enter – Create Job
Abrt (Soft Key)
Sett (Soft Key)
OK (Soft Key)
* = Current Job

14. NIKON NPL 332 STATION: STN / 7 KEY STATION 10 1: Known
ST: Enter Station Pt -10
INPUT N,E,Z
N = 1,000.00
E = 1,000.00
Z =
HI = ________
CD = _______
ENTRANCE
OLIN
STATION 10

15. NIKON NPL 332 STATION BACK SIGHT SIGHT BS & ENT STATION 10 2: ANGLE
OLIN
STATION
BACK SIGHT
2: ANGLE
BS PT - No Entry
AZ – Mag Azimuth – Flag Pole
SIGHT BS & ENT
STATION 10
ENTRANCE

16. POINT GUIDANCE Traverse Points – Single Digit
Instrument/Setup Pts – Double Digit
Sideshots/BM – Triple Digits
HMU #4
STATION 11
FIRE
#101
B-BALL #5
MILLER #3
OLIN #2
STATION 10
STATION 12
STATION 13
ENTRANCE #1
ENTRANCE #7
PARKING #6

17. NIKON NPL 332 Bench Mark Survey STN / 7 KEY 4: RBM STATION 10
OLIN
Bench Mark Survey
STN / 7 KEY
4: RBM
Input BM Point – (Flag Pole)
PT= 0 - Enter
N = No Entry
E = No Entry
Z =
HT= ________
CD = FLAG
STATION 10
ENTRANCE
Sight Benchmark
MSR
ENT
HI ______

18. NIKON NPL-332 POINT SURVEY
SIGHT POINT
MSR1
RECORD PT _____
CD _____
ENT
Comments
Left Cursor – Delete Entry
Right Cursor – Overwrite Mode
Auto Point Advance = Next Pt = Pt =1

19. NIKON NPL 332 New Instrument Station STATION 11 STN / 7 KEY
HMU
STATION 11
New Instrument Station
STN / 7 KEY
2: RESECTION
PT: 1ST POINT
Input Point # – ENTER HT
Sight 1st POINT
MSR
PT: 2ND POINT
Sight 2nd POINT
B-BALL
MILLER
OLIN
ENTRANCE
PARKING

20. NIKON NPL 332 New Instrument Station STATION 11 (Continued)
HMU
STATION 11
New Instrument Station
(Continued)
N (small number good)
E (small number good)
Z (small number good)
REC
ST 11
HI ______
CD STATION 11
BS _____(Default 1st PT)
ENT
B-BALL
MILLER
OLIN
ENTRANCE
PARKING