Presentation is loading. Please wait.

Presentation is loading. Please wait.

Electronic Design of an Acousto Optic Tunable All Fiber Spectrometer

Similar presentations


Presentation on theme: "Electronic Design of an Acousto Optic Tunable All Fiber Spectrometer"— Presentation transcript:

1 Electronic Design of an Acousto Optic Tunable All Fiber Spectrometer
Tanuja A. Mouli Faculty Mentor: Professor Henry P. Lee Graduate Student: Fares Alhassen

2 The Project: Big Picture
Unknown Wavelength

3 Acousto Optic Tunable Filter (AOTF)
Metal Frame Optical Fiber PZT

4 AOTF: The PZT (Piezo Electric Tansducer)
Aluminum cone is attached to PZT disk When AC voltage is applied, the cone vibrates up and down CONE AC PZT

5 The AOTF When PZT vibrates, it creates a micro acoustic wave
RF PZT and horn (Piezo Electric Transducer) When PZT vibrates, it creates a micro acoustic wave Tunable filter is created by changing the frequency of PZT

6 AOTF: Notch Filter Acts to pass wide range of frequencies
While attenuating narrow band of frequencies

7 AOTF PZT Aluminum Cone

8 Why use AOTF? AOTF is easily tuned and can be controlled electronically Optic fibers have low insertion power loss Original spectrometer used costs 30K Spectrometer built with AOTF will be low cost ($100), compact and portable

9 Common Applications detect chemical compounds particle sizes Vibration
acoustic waves electric field fluid flow and temperature

10 Spectrometric Applications
Broadband Infrared (BBIR) Tunable Camera Filter (TCF) Portable Optical Spectra Analyzer (POSA)

11 The Design of the Spectrometer
Light Source AOTF Photodetector (PD) RF Amplifier Current –to- Voltage Conversion VCO Microcontroller Output Data

12 Schematic: Microcontroller Connection with VCO
1. Press button once 2. Press button again 1V 2V 3V 4V

13 Schematic: Current to Voltage Converter

14 Schematic: Overall Circuit

15 Final Circuit C-V converter VCO MCU

16 Problems and Solutions
VCO purchased (part #SN54LS624) did not output a clean sinusoidal. A different VCO was used (MAX038) When MAX038 was connected to microcontroller, the VCO gets hot

17 Results/Conclusion Successfully controlled VCO
Need to work on why VCO gets hot. Controlled C-V converter Could not view output data

18 Acknowledgements Said M. Shokair UROP Dr. Henry P. Lee UCI
Fares Alhassen Patrick Chan Kevin Edmonds UROP UCI IM-SURE

19 ANY QUESIONS?


Download ppt "Electronic Design of an Acousto Optic Tunable All Fiber Spectrometer"

Similar presentations


Ads by Google