1. Sensor Technology List HERE the name of the TWO sensors you are discussing in this document YOUR NAME HERE DATE HERE

2. NOTES- Delete this page!  You must research on TWO different sensors.  Submission: Submit a hard copy; no more than 12 slides. You MUST print 6 slides on a single sheet. Make sure they are readable. Include only useful information. DO not submit more than two sheets of paper. You must also submit an electronic version to the discussion group The file name should be:  YOUR-NAME_SENSOR-NAME_SENSOR2-NAME.doc  Example: CHRIS_SMOKE_WATER-LEVEL.doc  Please share your ideas on the discussion group and each student should try writing about a DIFFERENT sensor  Do not include very typical sensors such as temperature or photodiodes. HERE are some of the good examples: Pressure, accelerator, PH, optical, humidity, elevation, water level, shock and vibration, position, ultrasonic, etc. You can use: http://en.wikipedia.org/wiki/List_of_sensors http://www.electronics-manufacturers.com/info/sensors-and-detectors/ultrasonic- sensor.htmlhttp://www.electronics-manufacturers.com/info/sensors-and-detectors/ultrasonic- sensor.html and many more…

3. Sensor Name -  Description and picture What is it? What is it good for How is it built Different technologies used to build this sensor  DO NOT JUST COPY AND PASTE!

4. Technical Spec  Describe inputs and output signals  What is the precision  Does it require external power supply  Cost of the sensor  Internal description of the sensor  Etc.

5. Applications  List some of the typical applications  Add some figures  Explain if you are using them in your project

6. Interface  Show how this sensor can be interfaced with your PIC Explain what kind of interface do you need in order to interconnect it to the PIC  You must include a figure (USE VISIO)

7. References  List some of the MAIN references you used  You must explain what this reference is used for – TWO lines per reference