1. CWNA Guide to Wireless LANs, Second Edition Chapter Five IEEE 802.11 Media Access Control and Network Layer Standards 1

2. Objectives List and define the three types of WLAN configurations Tell the function of the MAC frame formats Explain the MAC procedures for joining, transmitting, and remaining connected to a WLAN Describe the functions of mobile IP 2

3. IEEE Wireless LAN Configurations: Basic Service Set 3 Basic Service Set (BSS): Group of wireless devices served by single AP –infrastructure mode BSS must be assigned unique identifier –Service Set Identifier (SSID) Serves as “network name” for BSS Basic Service Area (BSA): Geographical area of a BSS –Max BSA for a WLAN depends on many factors Dynamic rate shifting: As mobile devices move away from AP, transmission speed decreases

4. IEEE Wireless LAN Configurations: Extended Service Set 4 Extended Service Set (ESS): Comprised of two or more BSS networks connected via a common distribution system APs can be positioned so that cells overlap to facilitate roaming –Wireless devices choose AP based on signal strength –Handoff

5. IEEE Wireless LAN Configurations: Independent Basic Service Set 5 Independent Basic Service Set (IBSS): Wireless network that does not use an AP –Wireless devices communicate between themselves –Peer-to-peer or ad hoc mode BSS more flexible than IBSS in being able to connect to other wired or wireless networks IBSS useful for quickly and easily setting up wireless network –When no connection to Internet or external network needed

6. IEEE 802.11 Media Access Control (MAC) Layer Standards Media Access Control (MAC) layer performs several vital functions in a WLAN –Discovering WLAN signal –Joining WLAN –Transmitting on WLAN –Remaining connected to WLAN Mechanics of how functions performed center around frames sent and received in WLANs 6

7. MAC Frame Formats Packet: Smaller segments of a digital data transmission –Strictly speaking, other terms used to describe these smaller segments Frames: Packet at MAC layer –Or Data Link layer in OSI model –IEEE MAC frames different from 802.3 Ethernet frames in format and function –Used by wireless NICs and APs for communications and managing/controlling wireless network 7

8. MAC Frame Formats -Management Management Frames: Initialize communications between device and AP (infrastructure mode) or between devices (ad hoc mode) –Maintain connection 8 Figure 5-4: Structure of a management frame

9. MAC Frame Formats - Types Types of management frames: 1.Authentication frame 2.Association request frame 3.Association response frame 4.Beacon frame 5.Deauthentication frame 6.Disassociation frame 7.Probe request frame 8.Probe response frame 9.Reassociation request frame 10.Reassociation response frame 9

10. MAC Frame Formats - Control Control frames: Provide assistance in delivering frames that contain data 10 Figure 5-5: Control frame

11. MAC Frame Formats - Data Data frame: Carries information to be transmitted to destination device 11 Figure 5-6: Data frame

12. Discovering the WLAN: Beaconing 12 At regular intervals, AP (infrastructure network) or wireless device (ad hoc network) sends beacon frame –Announce presence –Provide info for other devices to join network Beacon frame format follows standard structure of a management frame –Destination address always set to all ones

13. Discovering the WLAN: Beaconing Fields Beacon frame body contains following fields: 1.Beacon interval 2.Timestamp 3.Service Set Identifier (SSID) 4.Supported rates 5.Parameter sets 6.Capability information In ad hoc networks, each wireless device assumes responsibility for beaconing In infrastructure networks beacon interval normally 100 ms, but can be modified 13

14. Discovering the WLAN: Scanning Receiving wireless device must be looking for beacon frames Passive scanning: Wireless device simply listens for beacon frame –Typically, on each available channel for set period Active scanning: Wireless device first sends out a management probe request frame on each available channel –Then waits for probe response frame from all available APs 14

15. Discovering the WLAN: Active Scanning 15

16. Joining the WLAN: Authentication Unlike standard wired LANS, authentication performed before user connected to network –Authentication of the wireless device, not the user IEEE 802.11 authentication: Process in which AP accepts or rejects a wireless device Open system authentication: Most basic, and default, authentication method Shared key authentication: Optional authentication method –Utilizes challenge text 16

17. Open System Authentication 17

18. Shared Key Authentication 18

19. Joining the WLAN: Authentication Open system and Shared key authentication techniques are weak –Open System: Only need SSID to connect –Shared Key: Key installed manually on devices Can be discovered by examining the devices Digital certificates: Digital documents that associate an individual with key value –Digitally “signed” by trusted third party –Cannot change any part of digital certificate without being detected 19

20. Joining the WLAN: Association Association: Accepting a wireless device into a wireless network –Final step to join WLAN After authentication, AP responds with association response frame –Contains acceptance or rejection notice If AP accepts wireless device, reserves memory space in AP and establishes association ID Association response frame includes association ID and supported data rates 20

21. Distributed Coordination Function (DCF) MAC layer responsible for controlling access to wireless medium Channel access methods: Rules for cooperation among wireless devices –Contention: Computers compete to use medium If two devices send frames simultaneously, collision results and frames become unintelligible Must take steps to avoid collisions 21

22. Carrier Sense Multiple Access with Collision Detection (CSMA/CD)Used on Ethernet LANs 22 Carrier Sense Multiple Access with Collision Detection (CSMA/CD): Before networked device sends a frame, listens to see if another device currently transmitting –If traffic exists, wait; otherwise send –Devices continue listening while sending frame If collision occurs, stops and broadcasts a “jam” signal CSMA/CD cannot be used on wireless networks: –Difficult to detect collisions –Hidden node problem

23. Hidden node problem 23 Laptop A,Laptop B and Laptop C can not see the transmission of each other (more later on this topic)

24. Transmitting on the WLAN: Distributed Coordination Function and CSMA/CA Distributed Coordination Function (DCF): Specifies modified version of CSMA/CD –Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) –Attempts to avoid collisions altogether –Time when most collisions occur is immediately after a station completes transmission –All stations must wait random amount of time after medium clear Slot time 24

25. CSMA/CA CSMA/CA also reduces collisions via explicit frame acknowledgment –Acknowledgment frame (ACK): Sent by receiving device to sending device to confirm data frame arrived intact –If ACK not returned, transmission error assumed CSMA/CA does not eliminate collisions –Does not solve hidden node problem 25

26. CSMA/CA and ACK 26

27. Request to Send/Clear to Send 27 Request to Send/Clear to Send (RTS/CTS) protocol: Option used to solve hidden node problem –Significant overhead upon the WLAN with transmission of RTS and CTS frames Especially with short data packets –RTS threshold: Only packets that longer than RTS threshold transmitted using RTS/CTS

28. Interframe Spacing 28 Interframe spaces (IFS): Intervals between transmissions of data frames –Short IFS (SIFS): For immediate response actions such as ACK –Point Coordination Function IFS (PIFS): Time used by a device to access medium after it has been asked and then given approval to transmit –Distributed Coordination Function IFS (DIFS): Standard interval between transmission of data frames

29. CSMA/CA with two stations transmitting 29

30. Transmitting on the WLAN: Fragmentation Fragmentation: Divide data to be transmitted from one large frame into several smaller ones –Reduces probability of collisions –Reduces amount of time medium is in use If data frame length exceeds specific value, MAC layer fragments it –Receiving station reassembles fragments Alternative to RTS/CTS –High overhead ACKs and additional SIFS time gaps 30

31. Point Coordination Function (PCF) Polling: Channel access method in which each device asked in sequence if it wants to transmit –Effectively prevents collisions Point Coordination Function (PCF): AP serves as polling device or “point coordinator” Point coordinator has to wait only through point coordination function IFS (PIFS) time gap –Shorter than DFIS time gap 31

32. DIFS and DCF frames 32 If point coordinator hears no traffic after PIFS time gap, sends out beacon frame –Field to indicate length of time that PCF (polling) will be used instead of DCF (contention) Receiving stations must stop transmission for that amount of time –Point coordinator then sends frame to specific station, granting permission to transmit one frame 802.11 standard allows WLAN to alternate between PCF (polling) and DCF (contention)

33. Quality of Service (QoS) and 802.11e DCF does not work well for real-time, time-dependent traffic Quality of Service (QoS): Capability to prioritize different types of frames Wi-Fi Multimedia (WMM): Modeled after wired network QoS prioritization scheme 802.11e draft: defines superset of features intended to provide QoS over WLANs –Proposes two new mode of operation for 802.11 MAC Layer 33

34. Quality of Service and 802.11e 34 Table 5-1: Wi-Fi Multimedia (WMM)

35. Transmitting on the WLAN: Quality of Service and 802.11e (continued) 802.11e draft (continued): –Enhanced Distributed Channel Access (EDCA): Contention-based but supports different types of traffic Four access categories (AC) Provides “relative” QoS but cannot guarantee service –Hybrid Coordination Function Controlled Channel Access (HCCA): New form of PCF based upon polling Serves as a centralized scheduling mechanism 35

36. Remaining Connected to the WLAN: Reassociation Reassociation: Device drops connection with one AP and establish connection with another –Several reason why reassociation may occur: Roaming Weakened signal –When device determines link to current AP is poor, begins scanning to find another AP Can use information from previous scans 36

37. Power Management 37 A WLAN laptop must remain “awake” in order to receive network transmissions –Original IEEE 802 standard assumes stations always ready to receive network messages Power management: Allows mobile devices to conserve battery life without missing transmissions –Transparent to all protocols –Differs based on WLAN configuration –AP records which stations awake and sleeping –Buffering: If sleeping, AP temporarily stores frames

38. Power Management At set times AP send out beacon to all stations –Contains traffic indication map (TIM) –At same time, all sleeping stations switch into active listening mode Power management in ad hoc mode: –Ad hoc traffic indication message (ATIM) window: Time at which all stations must be awake Wireless device sends beacon to all other devices –Devices that previously attempted to send a frame to a sleeping device will send ATIM frame indicating that receiving device has data to receive and must remain awake 38

39. WLAN IP Addressing In standard networking, IP protocol responsible for moving frames between computers –Network layer protocol TCP/IP works on principle that each network host has unique IP address –Used to locate path to specific host –Routers use IP address to forward packets –Prohibits mobile users from switching to another network and using same IP number Users who want to roam need new IP address on every network 39

40. Mobile IP 40 Provides mechanism within TCP/IP protocol to support mobile computing –Computers given home address, Static IP number on home network –Home agent: Forwarding mechanism that keeps track of where mobile computer located –When computer moves to foreign network, a foreign agent provides routing services Assigns computer a care-of address Computer registers care-of address with home agent

41. Mobile IP- Computer relocated 41

42. Summary A Basic Service Set (BSS) is defined as a group of wireless devices that is served by a single access point (AP) An Extended Service Set (ESS) is comprised of two or more BSS networks that are connected through a common distribution system An Independent Basic Service Set (IBSS) is a wireless network that does not use an access point Frames are used by both wireless NICs and access points for communication and for managing and controlling the wireless network 42

43. Summary (continued) The MAC layer provides four major functions in WLANs: discovering the WLAN signal, joining the WLAN, transmitting on the WLAN, and remaining connected to the WLAN Discovery is a twofold process: the AP or other wireless devices must transmit an appropriate frame (beaconing), and the wireless device must be looking for those frames (scanning) Once a wireless device has discovered the WLAN, it requests to join the network; This is a twofold process known as authentication and association 43

44. Summary (continued) The IEEE 802.11 standard specifies two procedures for transmitting on the WLAN, distributed coordination function (DCF) and an optional point coordination function (PCF) The 802.11 standard provides for an optional polling function known as Point Coordination Function (PCF) The 802.11e draft defines a superset of features that is intended to provide QoS over WLANs 44

45. Summary (continued) Power management allows mobile devices to be off as much as possible to conserve battery life but not miss data transmissions Mobile IP provides a mechanism within the TCP/IP protocol to support mobile computing 45