1. 1 Configuring Web services (Week 15, Monday 4/17/2006) © Abdou Illia, Spring 2006

2. 2 Learning Objectives Install FTP & NNTP Services Configure FTP sites Configure Web sites 70-216:8 @0-13:16/28:39

3. 3 Internet Information Services (IIS) IIS is the W2K feature that provides web services We can configure IIS to get the following:  A Web server  An FTP server  An Email (SMTP) server  A News (NNTP) server  Ability to manage printers over the network

4. 4 Configuring IIS IIS is installed by default during W2K installation* After IIS is installed, the Internet Services Manager can be used to configure and manage all web services * Except for FTP and NNTP services. See slides 24 for How to install FTP and NNTP.

5. 5 Configuring the Default FTP site Can decide how much inactive time is allowed. Can limit the number of concurrent connections to your FTP server. Can check who are currently connected Can decide which IP address to use for the FTP server if you have multiple NICs or multiple IP addresses assigned to your NIC. Can keep track of connections to your FTP server.

6. 6 Configuring the Default FTP site Having anonymous connections could be more secure for users because they avoid the risk to have their password intercepted. Can grant operator privileges to other users. Default username for anonymous connections

7. 7 Configuring the Default FTP site Can type in a Welcome message that will appear to users when they connect to your FTP server. Can type in an Exit message that will appear to users when they log off. Can have message that will appear to users who will try to connect to your FTP server after the maximum number of connections is reached.

8. 8 Configuring the Default FTP site Directory where the FTP files are located. Any file put in that directory will be available to users You can set the permission for users. You can them to download files from the server (Read), upload files to the server (Write).

9. 9 Configuring the Default FTP site Can decide which computers are granted or denied access to your FTP server.

10. 10 Making files available for download After configuring the FTP site, files have to be copies to the FTP Site directory for users to download.

11. 11 Transferring files with commands After configuring the FTP site, users can connect to the FTP server and transfer files using the command prompt

12. 12 Transferring files using a web browser After configuring the FTP site, users can connect to the FTP server and transfer files using their web browser

13. 13 Configuring a web site When IIS is installed, a default Web site is created.

14. 14 Configuring the Default web site Can allow your clients to maintain their connection to your Web server instead of a new connection for each request. Can limit the number of concurrent connections to your FTP server. Can keep track of connections to your FTP server. If you have multiple IP addresses, you can create a Web site with a different name (Description) for each IP address. You can see & modify the fog file options

15. 15 Configuring the Default web site Can grant operator privileges to other users.

16. 16 Configuring the Default web site Can tune the performance of your Web server based on the number of visitors. Should make it as close as the actual situation so that the Web server uses just the amount of resources required to operate properly. Can limit the amount of bandwidth used by your server. Can limit the amount of processor time used by your web server.

17. 17 Configuring the Default web site ISAPI filters are some programs that will execute in response to HTTP requests. Can decide what filter to use

18. 18 Configuring the Default web site Can decide what level of access for visitors. Directory where the Web server files are located Can decide what settings for any IIS Web-based applications.

19. 19 Configuring the Default web site Can enable and specify default Web pages Directory where the Web server files are located Can decide what settings for any IIS Web-based applications

20. 20 Configuring the Default web site Can require secure communications with certificate use for the website. Can restrict access to specific IP or range of IP addresses. Can authorize Anonymous access (default) using the IUSR account or allow access to users with user accounts in the domain.

21. 21 Configuring the Default web site Can set ratings for your Web site users Can decide whether or not to send information (like content expiration date or some custom commands) in the HTTP header to the web browser.

22. 22 Configuring the Default web site Can configure the server to specify custom error messages

23. 23 Configuring the Default web site Server Extensions are related to FrontPage server extensions. You can allows people to use FrontPage to edit the Web site

24. 24 Installing FTP and NNTP services 1. Insert W2K Server CD in CD drive 2. Click Start/Settings/Control Panel 3. Double-click Add/Remove Programs 4. Click Add/Remove Windows Components 5. In the Windows Components screen, scroll down the list of components and select (i.e. highlight) Internet Information Services (IIS) 6. Click the Details button 7. Scroll down the list of IIS components and check FTP server and NNTP server, and click OK. 8. Click Next. When the files are copied, click Finish and close all opened windows. Now, in Administrative tools, your will have the Internet Services Manager

25. 25 Adding virtual IP addresses 1.Access your local network adapter’s properties 2.Click the Advanced button, and add two additional IP addresses.