1. Facial Tracking and Animation Todd Belote Bryan Harris David Brown Brad Busse

2. Problem Background Speech driven facial animation Correlate captured facial movements to audio patterns –Capture facial movements –Analyze corresponding audio

3. Goals and Objectives Develop an inexpensive, robust real-time system to track facial motion and process corresponding audio. The system must: –Cost around $1000 –Run on a personal computer –Allow for long periods of data acquisition –Handle head movements –Recover from point occlusion –Output only necessary information

4. System Description DATA ACQUISITION FAP GENERATION POINT INITIALIZATION POINT TRACKING AUDIO PROCESSING Top level system organization –Illustrates data flow –Functional block division

5. Division of Work Subsystem Leads: –Data Acquisition – Todd Belote –Point Initialization – David Brown –Facial Tracking – Brad Busse & Brian Harris –FAP Generation – Brian Harris

6. Data Acquisition CAMERA MICROPHONE AVI MOVIE FILE EH EH = EVENT HANDLER AUDIO PROCESSING VIDEO PROCESSING FRAMEGRABBER SW TIMER CAPTURECARDCAPTURECARD DEBUG MODE Total System

7. Data Acquisition AVI MOVIE FILE VIDEO PROCESSING FRAMEGRABBER SW TIMER PHASE 1 BMP FILE Camera Emulation –Parses AVI movie File –Sends video frame data to Video Processing –Standalone

8. Data Acquisition PHASE 2 CAMERA AVI MOVIE FILE EHVIDEO PROCESSING FRAMEGRABBER SW TIMER CAPTURECARDCAPTURECARD Begin Hardware Interface –Capture and Record Camera data to AVI File

9. Data Acquisition PHASE 3 CAMERA AVI MOVIE FILE EHVIDEO PROCESSING FRAMEGRABBER SW TIMER CAPTURECARDCAPTURECARD Hardware to Processing –Real Capture Data to Processing –Mode Switch implemented (Emulator / Hardware)

10. Data Acquisition PHASE 4 CAMERA MICROPHONE AVI MOVIE FILE EH AUDIO PROCESSING VIDEO PROCESSING FRAMEGRABBER SW TIMER CAPTURECARDCAPTURECARD WAV FILE Final Implementation –Audio Capture to Processing

11. Point Initialization Given: Grayscale bitmap of initial frame Retrieve: Point locations and identification Identify PointsFind Points DATA AQUISITION POINT TRACKING RGB Points BOOL::DONE

12. Point Initialization Design Constraints –Comparison of noise to points –Point motion within one frame Process –Find point which meets minimum point criteria –Find center of point –Identify all points

13. Point Initialization

15. Point Tracking Given: a frame of visual input and the initial positions of all the points Return: a list of displacements for use in FAP generation Point TransformPoint Discovery DATA AQUISITION FAP GENERATION RGB Relative Point Location POINT INITIALIZATION Initial Point Location

16. Point Discovery Given a frame of visual data and the last known data point positions: –Finds new data points by searching the area around the last seen position of each old data point –Updates locations of facial parameters when possible (i.e. not missing or in conflict)

17. Design: Point Transform Phase 1: Facial Orientation Correction Approach: Criminisi et al. Maps any arbitrary quadrilateral onto any other This can account for all six degrees of freedom as well as perspective distortion, greatly simplifying the computation required to reorient the face When using an orientation square that encompasses most of the face, this algorithm can be made as accurate as necessary

18. Point Transform: Demo

19. Design: Point Tracking Phase 2: Data Point to Facial Parameter Conversion The rectified data points are then compared with their last known positions This will determine the displacement of the facial parameters they represent, or reassign them should the points be lost or in conflict

20. FAP Generation Convert pixels to centimeters Normalize coordinates Output File FAP Generator Point Tracking FAP File Resolved Point Locations FAP Points

21. Validation / Test – Data Acquisiton Phase 1 –SW TIMER: Verify periodicity of Timer via calls to high performance clock –Test at 1000 ms –Test at 500 ms –Test at 100 ms –Test at 50 ms –Test at 33 ms –Test at 25 ms System Validated with accuracy within 10% at 33ms –FRAME GRABBER PARSE Frames from existing AVI Movie File and Save each frame as a BMP file –Verify the number of frames corresponds to the length in the AVI Header –Determine that the Frames are the correct size –Repeat on multiple file formats to insure robustness –PHASE 1 SYSTEM TEST Display data passed to VIDEO PROCCESING as an on screen bitmap at the rates listed above for the SW TIMER Testing. –Perform similar timing testing that was performed for the SW TIMER

22. Validation / Test – Data Acquisiton Phase 2 –Record Test Video’s of Multiple Lengths 3 seconds 30 seconds 3 minutes –Play Test Video in Windows Media Player Determine if coloring/ video appears correct –Parse Header Information to insure proper Values Compression = BI_RGB SIZE = 320x240 Rate = 30 fps –Perform FRAMEGRABBER testing with the Test AVI files. Phase 3 –Perform PHASE 1 system test with interface set to data from file. –Run system from camera and display VIDEO PROCESSING DATA on screen as bitmap. Determine if video appears correct Run system for variable times to insure stability (with MOVIE Record Turned Off) –3 seconds –30 seconds –3 minutes –30 minutes –Test error cases Invalid file name, during from file acquisition Camera not present, data from camera

23. Validation / Test – Data Acquisition Phase 4 –Capture audio test files, using clock calls to verify the length of capture = length of WAV file. 3 sec 30 sec 3 minutes –Play audio test files in Windows Media Player to determine length and audio quality –Data Acquisition System Timing Test Run the system on hardware capture mode Output the Audio and Video frame timestamps as they are delivered to processing Output the corresponding time in which they are delivered Analyze the data to check for synchrony, periodicity, and evidence of time shift.

24. Validation/Test - Initialization Test location and identification of points on many faces Failure to complete task may imply failure and may imply design constraint –Distance from camera –Initial face orientation

25. Validation/Test - Tracking Test a number of different faces in a number of different poses at the limits of our specified allowances If the system accomplishes the following –Correctly extracts data points from raw visual data –Reorients the face to extract the correct displacements for every available data point The system will have passed validation

26. Validation/Test – FAP Generation Use FAE Engine to observe synchronization between audio and facial movements –Perform specific facial motions and validate output Eg. Move chin down, move eyebrows up, smile This test will also be used to validate entire system

27. Environmental and Health Considerations All hardware is off the shelf No harm from infrared light No harm from other products –Eg. Reflective markers

28. Social, Political and Ethical Considerations Provide low cost audiovisual capture –Increase research in field by removing cost barrier –Further advances Eg. Phone for the deaf No Ethical Issues No Political affects

29. Economics and Sustainability No economies of scale due to narrow scope IBM PupilCAM is hard to locate and therefore sustainability with current hardware is issue –Other cameras could provide the same function