1. CERN Safety Alarm Monitoring (CSAM) CERN Safety Alarm System Supervisory Board 6st meeting Luigi Scibile & CSAM project team

2. CSAM Project Status report (Since last Supervisory Board)  Contract signed 3rd September 2001  Training of the contractor team  Successful Work Package 1 - Phase 1 Quality Assurance Plan, Development Plan and Safety Plan, project Management Plan, Configuration Management Plan General Specifications and Preliminary Risk Calculations  Installed HMI prototype for the validation of the firemen  CSAM on EDMS and new Web_Working_area  EMC directives and expected results

3. CSAM Project Current Status  Approval of the detailed SW/HW specifications  Working on SW/HW design  Validation of the HMI for the firemen  Review of the network strategy with IT/CS  Test using the recommended SCADA not successful so far  Financial plan in line with estimates and with no cuts

4. CSAM project

9. CSAM Project Review of the network strategy (current status of the review)  For LHC Safety Network -> New Accelerator Network Technical Network -> General Network  For SPS and prevessin Safety Network -> ? - New Accelerator Network Technical Network -> Extension of General Network (Not present in the BAs)  For Meyrin site Safety Network -> ? - New Accelerator Network Technical Network -> General Network Alim: Via ST/EL €: Included in IT Budgets Alim: Via ST/EL €: Included in IT Budgets Alim: ? €: ? Alim: ? €: ? Alim: Via ST/MA ?? €: connections included in ST budgets Alim: Via ST/MA ?? €: connections included in ST budgets

10. CSAM Project Short-term milestones  System realisation completed by May/June 2002  Pilot installation in SM18 by August/September 2002  Acceptance Testing by October/November 2002

11. CSAM Project Conclusions  After a period of orientation, the consortium is performing up to expectations and in a very good partnership spirit  Few problems encountered during the set-up of the contracts have been successfully solved  Budget cuts have indirectly affected the project Networks, Cabling, UPS, etc.  The proposal for the safety network is being revised  The tests on the safety aspects of the recommended SCADA system have not been successful so far