1. Self-monitoring programme for a Swedish power plant Hans-Roland Lindgren Director Swedish EPA 1

2. Monitoring programme - Linköping power plant General information Description of the plant and its emissions Permit conditions Environmental monitoring Process monitoring (instructions and recording) Recipient monitoring (air, water) External inspections (boiler, CFC-inst. etc.) Reporting Annexes (drawings of boilers, emission points, treatment plants and coal storage area) Hans-Roland Lindgren 2

3. The plant and its emissions Waste and hazardous waste disposal Noise Fuels (amounts, types and storage) Chemicals (urea for NOx reduction, boiler and water treatment chemicals) Location Coal-, oil-, wood boilers and turbines Air emission sources and its control Description of water system and water treatment 3

4. Air emission monitoring of coal boiler Continuous monitoring of nitrogen oxides, sulphur dioxide, dust, oxygen, and carbon monoxide Once a year as part of external inspections are dinitrogen oxide, ammonia and phthalates monitored Lead, cadmium and zinc once a month on a collective sample and during inspections Hans-Roland Lindgren4

5. Air emission monitoring of oil boiler Continuous monitoring of nitrogen oxides, oxygen, and carbon monoxide Once a year as part of external inspections are dinitrogen oxide, ammonia and dust monitored Sulphur is monitored in oil at every delivery Hans-Roland Lindgren 5

6. Monitoring of condensate from wood boiler Continuous monitoring of ammonium nitrate, pH and water flow Twice a year and in addition as part of external inspections are suspended solids measured Hans-Roland Lindgren 6

7. Monitoring of water from ash handling, cooling and oil storage Suspended solids, pH and total sulphur is monitored in water from ash separator once a year Flow (continuously) and total extractable organic compounds during water pumping from oil storage by spot samples Daily average flow of cooling water during periods of power generation (May-Sept.) Hans-Roland Lindgren7

8. Process monitoring Instructions for operation and maintenance of boilers Instructions for operation and maintenance of air emission control equipment Instructions for calibration of monitoring equipment Recording of operational parameters Recording of calibrations and maintenance Recording of disturbances in the production of importance for the environment Hans-Roland Lindgren8

9. Environment quality monitoring Joint ambient air quality monitoring through the Association for Air Quality in the County to which the company contributes Water recipient quality monitoring through Motala Ström Water Association Hans-Roland Lindgren 9

10. External inspections Inspection of installations and records. Changes in production etc. which influence emissions are recorded Monitoring of noise is made Inspection and calibration of monitoring equipment Measurement of combustion and air emission parameters on all boilers and spot samples on all waste waters Report on all inspected objects. Results, evaluation, defects and planned changes Hans-Roland Lindgren10

11. Reporting Regular reporting every three months not later the 2 months of the end of the period Reporting on inspections within 2 months after inspection Reporting on disturbances and accidents immediately Yearly reporting within 2 months after end of year Hans-Roland Lindgren 11

12. Yearly reporting General information Description of operations Permits and permit conditions Environmental report Production time and conditions Monitoring results and emissions, accuracy of installed monitoring equipment Comments on permit conditions and possible actions CFC-reporting Signature Hans-Roland Lindgren 12