Presentation is loading. Please wait.

Presentation is loading. Please wait.

OSHA Region IV Electrical Outreach General Industry Photos 29 CFR 1910 Regulations.

Similar presentations


Presentation on theme: "OSHA Region IV Electrical Outreach General Industry Photos 29 CFR 1910 Regulations."— Presentation transcript:

1 OSHA Region IV Electrical Outreach General Industry Photos 29 CFR 1910 Regulations

2 General Industry Photos Standard – (d)(9)(iii) Description – Welding lead cable splice were not insulated. All splices and metal parts of cables and parts must be guarded.

3

4 General Industry Photos Standard – (b)(1) Description – Building wiring systems were not properly installed. Wiring draped over building surfaces.

5

6 General Industry Photos Standard – (b)(2) Description – Equipment not installed IAW listing requirements.

7

8 General Industry Photos Standard – (g)(1)(iii) Description – Access to circuit breaker panels blocked.

9

10 General Industry Photos Standard – (g)(2)(i) Description – Live parts exposed.

11

12 General Industry Photos Standard – (g)(2)(i) Description – The receptacle was not properly installed in the junction box which exposed energized parts.

13

14 General Industry Photos Standard – (g)(2)(i) Description – Broken electrical receptacle exposing energized parts.

15

16 General Industry Photos Standard – (g)(2)(i) Description – Live parts of 480 VAC electrical system exposed. All live parts are required to be guarded.

17

18 General Industry Photos Standard – (g)(2)(i) Description – Front cover removed from circuit breaker panel. Live parts exposed.

19

20 General Industry Photos Standard – (f)(5)(v) Description – Portable light with metal guard which is required to be grounded.

21

22 General Industry Photos Standard – (f)(5)(v) Description – The ground pin was removed from the electric plug.

23

24 General Industry Photos Standard – (a)(2)(iii)(G) Description – Electrical wiring was not protected from damage. Lying across road where cranes and other vehicular traffic could pass over the wiring.

25

26 General Industry Photos Standard – (b)(2) Description – The faceplate was removed from the receptacle exposing the energized parts.

27

28 General Industry Photos Standard – (e)(1) Description – Electrical systems were not designed for wet and damp locations

29

30 General Industry Photos Standard – (g)(2)(iii) Description – The electrical plug did not have adequate strain relief which causes stress on the contacts.

31

32 General Industry Photos Standard – (j)(1)(iv) Description – Electric cords and cables lying in water.

33

34 General Industry Photos Standard – (j)(1)(iv) Description – The receptacle which was approved for wet and damp locations was damaged.

35

36 General Industry Photos Standard – (b)(1) Description – Electrical wiring was not approved for hazardous locations. Paint spray area.

37

38 General Industry Photos Description – Electrical wiring and systems were not installed IAW NEC.

39

40

41

42

43

44

45

46

47

48

49


Download ppt "OSHA Region IV Electrical Outreach General Industry Photos 29 CFR 1910 Regulations."

Similar presentations


Ads by Google