Presentation is loading. Please wait.

Presentation is loading. Please wait.

802.11a/n Wireless LAN Outdoor AP

Similar presentations

Presentation on theme: "802.11a/n Wireless LAN Outdoor AP"— Presentation transcript:

1 802.11a/n Wireless LAN Outdoor AP

2 Presentation Outline Product Position Product Overview
Product Features Management – Web UI Applications Product Comparison Appendix Outdoor Antennas Antenna Connection Accessories

3 Product Position – Outdoor Wireless
2.4GHz WNAP-7350 WNAP-7300 5GHz 11n 300Mbps 2.4G/5GHz New WNAP-6306 WNAP-6305 WNAP-7205 WNAP-7206 11n 150Mbps Low  Performance  High 如果FGSD-1022P 缺貨, 可以用FGSD-1022HP 取代 WAP-7500 11a/g 54Mbps Short  Distance  Long 3 / 31 3

4 Product Overview IP55 Protection UV Stabilized H/W Design 85 mm 250 mm
60.5 mm 85 mm 250 mm IP55 Protection UV Stabilized 4 / 31

5 Product Overview Port & LED LAN Port
(Connect to client PC via PoE injector) Signal Indicator (Available in Client & Repeater Mode) RP-SMA (F) Connector (Connect to external antenna) Grounding Terminal LAN Port LED Power LED Reset Button (for Factory Default Setting)

6 Product Overview Proprietary PoE interface
Offer Power Supply (DC) with PoE (Power over Ethernet) injector Up to 60 meters UTP wiring Pin 4, 5 (+); 7, 8 (-) Power Adapter (12V, 1A) To LAN Switch or PC To WNAP-7206 (UTP wired up to 60m) 6 / 31

7 Product Overview Installation
STEP 1:Push the latch in the bottom of WNAP-7206 to remove the sliding cover. 7 / 31

8 Product Overview Installation
STEP 2:Plug the RJ-45 Ethernet cable into the LAN Port of WNAP- 7206, then slide the cover back to seal the bottom of the WNAP 8 / 31

9 Product Overview Installation Diagram
Strongly suggest using STP cable (part no. CB-STP-25) Consider to install ELA-100 avoiding thunder strike Fix WNAP-7206 in optimum location Complete Set 9 / 31

10 Product Features Hardware Design RF interface
IP55, Outdoor UV Stabilized Enclosure -30~70 Degree C wide range of operating temperature Passive Power over Ethernet Design RF interface IEEE a/n 5GHz standards compliant High output power up to 500mW with multiple adjustable transmit power control Data rate up to 150Mbps with n mode Built-in one RP-SMA(F) Connectors

11 Product Features 2X Stable 4X Reliable CE Requirement WNAP-7206
ESD Test 8kV 15kV Lightning Surge Test 4X Reliable 0.5~1kV 4kV 11 / 31

12 Product Features – 5GHz Advantage
5GHz Frequency Band Up to 24 non-overlapping channels, Less interference, stable connection

13 Product Features Wireless Operation Mode
AP, Client CPE (WISP), WDS PtP, WDS PtMP, Repeater (AP+WDS), Universal Repeater (AP+Client) WDS up to 4 remote APs SSID Broadcast & Hide Supported Multiple-SSID up to 4 (default included) Wireless Security 64/128/152-bit WEP, WPA, WPA2, WPA-PSK(TKIP), WPA2-PSK(AES) Max. Wireless Client up to 25 Stations Output Power Control (High, Middle, Low) Antenna Alignment & Distance Adjustment helps deployment

14 Product Features - Operation Mode
Multiple Operation Modes: up to 9 Modes

15 Operation Mode Access Point
Acts as a central hub for wired / wireless LAN and connect to Internet WNAP-7200 WNAP-7205 AP Mode WNAP-7300 5GHz Wireless AP WNAP-7206 WAP-7500 15 / 31

16 Operation Mode Client Bridge Client Mode AP Mode
Acts as a wireless client connecting with the remote AP System: Bridge mode Wireless : Client mode Client Mode IP Camera RJ-45 WNAP-7206 Wireless AP AP Mode 16 / 31

17 Operation Mode WDS Mode (Bridge)
Two APs in two remote locations connect to each other wirelessly WDS Mode WDS Mode WNAP-7206 WNAP-7206 PC PC 17 / 31

18 Operation Mode WDS + AP Mode (Repeater)
Bridge two APs and provides access for wireless clients at the same time Smart Pad WNAP-7206 WNAP-7206 WDS+AP Mode WDS+AP Mode

19 Wireless connection for Internet access
Operation Mode WISP (Client Router) Acts as a WISP client router and the WISP subscriber can easily share the WISP connection with only a simple switch. System: Router mode Wireless : Client mode WNAP-7206 WISP Mode No cable implement Wireless connection for Internet access Wireless ISP Provider

20 Product Features Management WAN Connection Types for WISP: Static IP
DHCP (Dynamic IP) PPPoE/Russia PPPoE PPTP/ Russia PPTP L2TP/ Russia L2TP BigPond Cable Support MAC/ IP/ DNS Filtering Support DHCP Server, UPnP User Friendly Web-based UI, Quick Setup System Status includes DHCP Client, Station List, SYS Log Support Planet DDNS, SNMP

21 Web UI – Quick Setup STEP.1 Select Operation Mode STEP.2
Configure Wireless Settings STEP.3 Finish Quick Setup

22 Web UI – Planet DDNS (Router Mode)
STEP.1 Go to to register a Planet DDNS account. STEP.2 Configure the DDNS account in WNAP-7206 STEP.3 Allow Remote Access via WAN

23 Application - Typical

24 Comparison – Planet 5GHz
Model Features WNAP-7206 WNAP-7205 WNAP-7200 Flash/RAM 4MB/32MB 2MB/32MB Ethernet Port 1*10/100Mbps 2*10/100Mbps (LAN/WAN) Power Passive PoE / 12VDC input Wireless Antenna Internal: 15dBi External: RP-SMA Connector *1 Internal: 16dBi Internal: 18dBi Operating Temp. -30~70°C -20~70°C 0~55°C Wireless Speed 150Mbps Output Power 27dBm(500mW) 25dBm(300mW) 23dBm(200mW) IP Code IP55 IP65 SNMP Yes No Planet DDNS Antenna Alignment Operating Mode AP, Client, WDS, Repeater, Universal Repeater, WISP AP, Client, WDS, Repeater, WISP

25 Appendix Target Market Benefit Target Customer Telecom to Business
Telecom to Residential Building to Building Public Area Access Hotel/Resort/Campus Small Wireless ISP Benefit Maximum Bandwidth Flexible in wireless coverage Saving wiring cost Suitable for various application Target Customer Who buy the products WNAP-7200 WNAP-7205 WNAP-7300 WAP-7500 WAP-8000 MAP-2000 / 3000 Series Who ever ask about WISP Outdoor Access Point Long Distance, High Power AP

26 Appendix Outdoor Antennas – 5GHz Not Suitable for WNAP-7206 ANT-FP23A
Model Feature ANT-FP23A ANT-FP18A ANT-FP15AD ANT-SE21A Antenna Type Uni-directional Flat panel Dual Polarization Sector Gain (dBi) 23 18 15 21 Beamwidth degree Horz. 9 10 15-19 60-120 adjustable Vert. 17-21 Connector N-Type N-Type x 2 Mounting Type Mast or Wall Mount

27 Appendix Outdoor Antennas – 5GHz ANT- SE17A ANT-OM10A Uni-directional,
Model Feature ANT- SE17A ANT-OM10A Antenna Type Uni-directional, Sector Omni-directional, General purpose Gain (dBi) 16.5 10 Beamwidth degree Horz. 120 360 Vert. 6 Connector N-Type Mounting Type Mast or Wall Mount

28 Appendix Accessories For WNAP-7206 WL-SMA-0.6 WL-SMA-6 WL-NM-0.6
Model Feature WL-SMA-0.6 WL-SMA-6 WL-NM-0.6 WL-MF-0.6 Type RP-SMA (Male) to N-male (male pin) N-male (male pin) to N-female (female pin) Length 0.6m 6m Connector Side-1 Side-2

29 Appendix Accessories WL-N-10 WL-N-0.6 WL-MMC WL-LTNA Type
Model Feature WL-N-10 WL-N-0.6 WL-MMC WL-LTNA Type N-male (male pin) to N-female (female pin) N-male (female pin) to N-male (male pin) R-MMCX (Female) to R-SMA (Male) Length 10m 0.6m 0.3m - Connector Side-1 Side-2

30 Appendix Related Products & Accessories CB-STP-25 (25M STP Cat5 Cable)
WL-LTNA (Lightning Arrester) ELA-100 (Ethernet Lightning Arrest Box) WL-NM-0.6 (RF Cable) 5GHz Outdoor Antenna ANT-OM10A ANT-FP18A ANT-FP23A ANT-SE17A ANT-SE21A CB-STP-25 WL-LTNA ELA-100 WL-NM-0.6


Download ppt "802.11a/n Wireless LAN Outdoor AP"

Similar presentations

Ads by Google