Presentation is loading. Please wait.

Presentation is loading. Please wait.

© Fronius 2/2001 PLASMA -POWER SOURCE. © Fronius 2/2001 Fronius Plasma Module-- FPM 1.Pilot current display 10A/20A 2. Adjustment possibility for pilot.

Similar presentations


Presentation on theme: "© Fronius 2/2001 PLASMA -POWER SOURCE. © Fronius 2/2001 Fronius Plasma Module-- FPM 1.Pilot current display 10A/20A 2. Adjustment possibility for pilot."— Presentation transcript:

1 © Fronius 2/2001 PLASMA -POWER SOURCE

2 © Fronius 2/2001 Fronius Plasma Module-- FPM 1.Pilot current display 10A/20A 2. Adjustment possibility for pilot current 3. Plasma gas display 0,6-10l/min (option:0,3-3,0l/min) 4. LED Pilot- arc on 5. Start/stop pilot- arc 6. Adjustment knob for plasma gas value „100“ = 1,0l/min resp. 0,33l/min 7. Push button gas test 8. Torch connection (W/Z) 9. Power source connection

3 © Fronius 2/2001 Fronius Plasma Module-- FPM 1. Main switch 2. Main supply fuse 6,3AT 3. Roboterinterface 10pol. Amphenol 4. Mains cable 230V/50-60Hz 5. Connection ¼“ gas bottle ~6 bar

4 © Fronius 2/2001 Fronius Plasma Module-- FPM Roboter-Interface(10pol. Amphenol plug) Digital inputs: Start pilot- arc Emergency stop Analog inputs: Command value plasma gas0-10V = 0-10l/min Analog outputs: Real value plasma Gas:0-10V = 0- 10l/min

5 © Fronius 2/2001 Fronius Plasma Module-- FPM Roboter-Interface(10pol. Amphenol plug) Digital inputs: Start pilot- arc Emergency stop Analog inputs: Command value plasma gas0-10V = 0-10l/min Analog outputs: Real value plasma Gas:0-10V = 0- 10l/min

6 © Fronius 2/2001 Power sources for soft- plasma welding Digital power sources TS4000 Remote orTS4000 Comfort with RCU 2000 useable Simple retrofitting of existing TIG/ MIG-units for plasma welding No electronic connection between power source and plasma modul necessary Connecting of torch and plasma modul,watercooling on constant on, deactivation of the HF resp. set them on external,welding,....

7 © Fronius 2/2001 I- kits for soft- plasma welding I-kit TS/TPS 4000/5000 TIG Gas solenoid valve and F- connector Attention: No function with CC/CV Order no.: 4,100,410 Adapter TT/MW - F gas extern Order no.: 44,0350,2358 I-kit LocalNet distributor activ Order no.: 4,100,298

8 © Fronius 2/2001 Cooling unit for soft- plasma welding FK 4000 -R Cooling unit must be equiped with water flow controller. Cooling unit must be switched tocontinuous Water flow controller FK 4000-R Order no.: 4,100,214

9 © Fronius 2/2001 Remote control for soft- plasma welding RCU 2000 TIG/Plasma parameter finding Order no.: 4,046,089 If a RCU 2000 is connected on a TS/TPS, the power source will switch to TIG/Plasma- Mode In the 2nd setup menue the HF must be switched to „EhF“ to get the maximum open curcuit voltage.

10 © Fronius 2/2001 Robot- interface for soft- plasma welding ROB 4000 Analog/digital control Order no.: 4,100,239 ROB 5000 Analog/digital control with extended signal range Order no.: 4,100,255

11 © Fronius 2/2001 Robot- interface for soft- plasma welding Fieldbus system Serial communication Order no.: 4,100,252 (DeviceNet) I-kit Fieldbus external 2AO/2DO Analog control of FPM and TP1500 HD Order no.: 4,100,462

12 © Fronius 2/2001 Wire feeder for soft- plasma welding VR 7000 4R/G/W/F Wire feeder Order no.: 4,045,832 I-kit PMR 4000 PullMig Push-Pull extension Order no.: 4,100,217

13 © Fronius 2/2001 Wire feeder for soft- plasma welding I-kit Robacta connection VR Extension for KD-Drive Order no.: 4,100,258 Remote control cable 5m Connection power source - VR Order no.: 43,0004,0459

14 © Fronius 2/2001 Torch for soft- plasma welding Robacta PTW 1500 Z/4m Plasma robot torch Duty cycle 100% at 150 A–Pol As option KD-feeding Shipment condition: Plasma nozzle 2,5mm Ø Electrode WL10 2,4mm Setting gauge Robacta PTW 1500Z/4m Order no.:4,035,821

15 © Fronius 2/2001 Torch accessories for soft- plasma welding Robacta KD-Drive plasma 6m Drive-unit 0-11m/min Order no.: 4,045,950 Basic kits Plasma Drive Wire feed rolls, innerliners,... ø0,8mm Order no.: 44,0350,2332 Ø1,0mm Order no.: 44,0350,2333 Ø1,2mm Order no.: 44,0350,2334 Ø1,6mm Order no.: 44,0350,2335

16 © Fronius 2/2001 Options for soft- plasma welding Carriage Pick-up Order no.: 4,045,839 Feeder swivel mount VR4000 Order no.: 4,100,218

17 © Fronius 2/2001 Options for soft- plasma welding VR- mounting double head For uptake FPM/KD 4010 Order no.: 4,045,872 Bottle mounting plate DUO Order no.: 4,045,858

18 © Fronius 2/2001 Options for soft- plasma welding Hot wire configuration For plasma- brazing Current cable PTW 1500 TP 1500 – wire outlet nozzle 44,0350,2345 Connection cable TP 1500 – robot/ fieldbus interface 38,0100,088 TP 1500-RC HD 4,075,109,631

19 © Fronius 2/2001 Options for soft- plasma welding Pressure regulator CO2/Argon With messurement tube 0-32l/min Order no.: 43,0011,0008 Earth cable 95mm² 10m with cable socket ø13,5mm Order no.: 43,0004,2130


Download ppt "© Fronius 2/2001 PLASMA -POWER SOURCE. © Fronius 2/2001 Fronius Plasma Module-- FPM 1.Pilot current display 10A/20A 2. Adjustment possibility for pilot."

Similar presentations


Ads by Google