Download presentation

Presentation is loading. Please wait.

Published byAvis Porter Modified over 2 years ago

1
Layers and perimeters

3
First Layer Height=.35 & Solid Layers Bottom=3 Layer Height Solid Layers Top=3 If Solid Layer Top=3 the top Three layers will be printed solid Based on the Infill:Top/Bottom Fill Pattern. In the image on the right The top/bottom pattern is Hilbertcurve. The Infill Layer is an inner fill (non – solid) Honeycomb layer. Perimeters Infill Layer

4
Perimeter = 2 Perimeter = 6 Infill:Fill Pattern=Honeycomb

5
Top layer fill patterns

6
Infill

7
Fill Density = 0.4 Fill Density = 0.1

8
Infill:Fill Pattern=Honeycomb Infill:Fill Pattern=Rectlinear

9
Solid every 20 th layer Layers Solid Layers Bottom=7

10
Fill Angle=45 Fill Angle=0

11
Top/bottom fill patterns concentric

12
Top/bottom fill patterns Hilbertcurve

13
Top/bottom fill patterns Rectlinear

14
Top/bottom fill patterns Archimediancords

15
Top/bottom fill patterns Octagramspiral

16
Skirt and Brim

18
Loops = 3 Distance 6mm Skirt Height = 5 Brim = 2.5mm

19
Support Material

21
Object Skirt Raft

22
Layer 1 – default fill Layer 2 –applied parameters Layer 2 applies the Pattern, rectlinear, at the pattern spacing and angle. This pattern will be repeated for the layer specified in by Raft Layers 2.5mm

23
10mm Pattern spacing=4mm Five Interface layers { { 10 Raft Layers Pattern spacing change from 4 to 2.5

24
Object first solid layer

Similar presentations

OK

Year 7: Length and Area Perimeter The perimeter of a shape is the total distance around the edge of a shape. Perimeter is measured in cm A regular shape.

Year 7: Length and Area Perimeter The perimeter of a shape is the total distance around the edge of a shape. Perimeter is measured in cm A regular shape.

© 2017 SlidePlayer.com Inc.

All rights reserved.

Ads by Google