We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byVincent Lloyd
Modified over 2 years ago
Points Command T_GeoP – Inserts points with numbers Command T_GeoPExp – Save coordinates to csv file Command T_ImpP – Draw points, lines, spline Command T_GeoPImp – Draw points with description
Axis Command T_WstawOs – Draw arc and circle axis – Draw axis by many circles Command T_RysujOs Shortcut: – Offset – Draw arc by 3 points
Circles Change circles to: – Circles with other diameter – Points – Cross symbol – Starr symbol
Save with backup Total lenght of selected elements Scale: mm inches
Perimeter and Area with Circles. Circumference of a Circle Circumference is the perimeter of the circle Formula: or (for exact answers, leave π in your.
COMPUTER AIDED DRAFTING 1 Pharos University Faculty of Engineering Architecture Department 3 rd semester 2010/2011 AE (151) Prof.Dr. Alaa Eldin Hassan.
GEOMETRY HELP Circle A with 3-cm diameter and center C is a dilation of concentric circle B with 8-cm diameter. Describe the dilation. The circles are.
Job Description Report Generation. Job Description Reporting Click on Manage JD and select JD Report.
Sectionals Sliced view of a part or component in a drawing showing its internal make up.componentdrawing.
Introduction to A+CAD. Objectives Understand fundamental CAD concepts Start A+CAD Tour the A+CAD interface Explore the different A+CAD data input methods.
Sketch Up basics Mr Regier. Start up screen Choose Units (Often imperial)
CIRCUMFERENCE OF A CIRCLE LEARNING TARGET 4: I CAN SOLVE PROBLEMS USING AREA AND CIRCUMFERENCE OF A CIRCLE.
3 Floor Plan Block Out Georgian House Continues. Commands Layer Properties Loading linetype – Hidden – Center – Center2 – Centerx2 – Global Scale 24 –
Computer Aided Design and Drafting Introduction. Objectives Upon completion of this lesson you will be able to: Identify and Describe a Technological.
RESISTOR A. Open your Titlebox
(0,0) The Cartesian Coordinate System I IV III II +,- -,- +,+ -,+ Y+ Y- Z+ Z- X+ X- Basis for plotting all machine table positions The left/right axis.
The Cartesian Coordinate System
The reading is 7.38 mm. The reading is 7.72 mm.
Chapter 2 Sketching, Constraining & Dimensioning
Model Editing James Martin High School Computer Multimedia and Animation Instructor: G. Patton From: CHAPTER 5 – 3DS MAX AND ITS APPLICATIONS.
Sections Perimeter and Area with Circles.
Xplo 1.0 Plant architecture « eXploration » 23/03/10 Sébastien Griffon.
Getting Started With AutoCAD ENGR 2 Week #1 Laboratory.
Use Quartus II Design Procedure. Use Quartus II Create Project.
Introduction to Engineering Introduction to 2-D CAD Reference – CADKEY Project Book Chapter 3 – Creating Basic 2-D Geometry.
University of Puerto Rico at Mayagüez Department of Mechanical Engineering Introduction to NX 6.0 Tutorial 3 Modified by (2011): Dr. Vijay K. Goyal and.
Sector of a Circle Section If a circle has a radius of 2 inches, then what is its circumference? What is the length of the arc 172 o around.
CIRCLES CIRCUMFERENCE & AREA. CIRCUMFERENCE C = ΠdorC = 2Πr 12cm.
Step 1: Find the Cumulative Frequency for each class. < 99.5 < <109.5 < < < < <
4-5 Inequalities (pages ) P6 Represent inequalities on a number line or a coordinate plane.
A Mid-Term study guide of covered commands. SAVING Using the Save command allows the drafter to save an already developed drawing. The Save As command.
Computer – Aided Design Terminology You must have a generic understanding of commands and techniques which are used in a number of packages (YOU CANNOT.
By Paul Richard and Jim Fitzgerald Chapter 7 – Basic Editing Techniques.
基 督 再 來 （一）. 經文： 1 你們心裡不要憂愁；你們信神，也當信我。 2 在我父的家裡有許多住處；若是沒有，我就早 已告訴你們了。我去原是為你們預備地去 。 3 我 若去為你們預備了地方，就必再來接你們到我那 裡去，我在 那裡，叫你們也在那裡， ] ( 約 14 ： 1-3)
Circle Theorems-“No Brainers”
1 SAVE A DRAWING AS A TEMPLATE TO REUSE: SETTINGS, DRAWING SHEETS, LAYOUTS, STYLES WITHOUT RECREATING THEM IN EACH NEW DRAWING. TO REUSE: SETTINGS, DRAWING.
Question 1 Write the equation of the circle: Center: (-7, 14) Area: 81π.
Descriptive Geometry. Introduction What is Descriptive Geometry? →It is the study of points, lines, and planes in space to determine their locations.
Technological Design Basic Dimensioning with AutoCAD How to annotate simple drawings for use in constructing an object.
The Power... Of PowerPoint. Toolbars Drawing Toolbar Formatting Toolbar Standard Toolbar.
Chapter 6: Fundamentals V. After completing this Chapter, you will be able to use the following features: Multiline – Drawing and ModificationMultiline.
Geometric Dimensions and Tolerances
Shape Editor Programming Example
COMP 116: Introduction to Scientific Programming Lecture 5: Plotting, Scripts and publishing.
Circles…… Area and Circumference The Circumference of a Circle Find the circumference of the following circles. C = d C = 2 r 8 cm cm 2 C =
Problem For the 5 x 3 x -in. angle cross
By Sin-Pui Fu Fall 2012 ME250, University of Illinois at Chicago 7,Sep, 2012 Autocad lecture 1 Introduction of Autocad and Title Block By Sin-Pui Fu.
Circles, II Chords Arcs.
1-- Setup AutoCAD today a-Create documents – Wizard Quick Set Up – Area – units Advanced Set Up – Area – Units – Angles.
10 Dimensioning. 10 Dimensioning Explain why dimensions and notes are needed on drawings. Identify, explain, and accurately use the two systems of.
Ken Youssefi Engineering 10, SJSU 1 The Blade Shape Design groups should conduct a thorough search of the internet to obtain information on turbine rotor.
ts/math/geometry/GP14/CircleCho rds.htm 4.1b: Chords CCSS GSE.
AREA OF CIRCLES. REVIEW-CIRCUMFERENCE WORDS: The circumference of a circle is equal to pi times its diameter or pi times twice its radius. Symbols: or.
© 2017 SlidePlayer.com Inc. All rights reserved.