Presentation on theme: "Det Dev meeting 24/07/2012 R. Bates. Equipment in the PPE labs Cascade Microtech S300 probestation (345) – 12inch, semi-automatic, probe cards and micro-"— Presentation transcript:
Equipment in the PPE labs Cascade Microtech S300 probestation (345) – 12inch, semi-automatic, probe cards and micro- manipulators Wentworth Probe station(341a) – 8 inch, Temptronic thermal chuck 200C to -50C, probe card and micro-manipulators, darkbox H&K 710 ultrasonic wedge wire bonder (345) – Fred, Joe and Fiona are the operators H&K 820 ultrasonic wedge wire bonder (341a) – Fred, Joe and Fiona are the operators
Equpi cont Disco DAD 321 Automatic saw (345) – 6inch wafer saw, blades for Si, GaAs, glass, saphire – Fiona is the operator Cammax Precima DB600 die bonder (341a) – Thermal work piece Baty Venture CMM (341a) – Touch probe and non-contact vision system – X,y,z range = 300x 300x 165mm. 0.5um accuracy Asymtek DispenseMate D-583 (341a) – Programmable Glue robot, 325 mm x 325 mm dispense area. Uses syringe system with compressed air to dispense
Equip – cont Microscopes – Vision system (345) – Olympus (341a) X100 objective lens FLIR A40 thermal camera (339) – Not a cooled device! – With additional lens for high resolution imaging Requires higher temperatures for higher resolutions Two thermal cycling chambers (341 and 341a) – Includes nitrogen purge Thermal conductivity characterization equipment (341a) – Chillers to maintain temperature – In-plane measurements (100mm x 10mm x 1mm) -30C, in vacuum chamber with thermal shield, RTDs for temepratures – Through-plane measurements Room temperature, IR camera and/or RTDs to measure temperature
LCR/HV etc Power supplies – Keithley 237 (1100V, 10fA, 10uV) – 3off (Medipix, Wentworth prober) – Keithley 2410 (1100V, 10pA, 1uV) – 3off (Alibava, ABCN DAQ, USBPix DAQ) – Keithley 4200 (semicondutor parameter analyzer) – Low voltage bench supplies - many LCR – Agilent 4284A (20Hz to 1MHz) – HP 4274A (100Hz to 100kHz) Scopes – Agilent Infinium 9000 (ABCN DAQ) – LeCroy 9360 – a few Signal generators – Agilent 81130A (400MHz dual channel pulse generator) – HP 81110A (165MHz single/dual channel pulse generator) For more items see Andy’s nice google doc: https://docs.google.com/spreadsheet/ccc?key=0Aqwxp- Jlfw64dElzREhDZDJwU0dWTUhGa3U3RmQ3V1E&hl=en_US#gid=0
Optical characterisation equip Dark-box with an automated x-y stage Spectral response measurements: can be made using a tunable monochromator (280-810nm) using fibre optic outputs Flat field images: made using super bright LEDs and with diffusion paper to equalise light over DUT Photon Transfer Measurements: made by varying voltage to LED. Main technique used for analyzing CCD and APS devices All above measurements are fully automated using custom written Labview scripts. Image processing done via custom c/root files
DAQ systems/sources Alibava (341a) USB system, LHC speeds, Analogue information via Beetle front-end TELL1 (341) LHC speeds, Analogue information via Beetle front-end, requires crate and more Linux/LHCb logon etc ABCN (341a) HSIO based system for ABCN device testing USBPix (341a) USB system for ATLAS pixel detector testing Medipix/Timepix (341) USB connection, Don’t have Medipix3 capability at present NIM/CAMAX MIP set-up (341) Ortec pre-amps, slow shaping time (order 1us), Controlled via PC with CAMAX interface MCA for Gamma/X-ray tests (341a) Ortec pre-amps, slow (order 1us), controlled via PC Sources – Lab sources: Sr-90, Alpha and Gamma sources (341a) – Dental X-ray generator (341) – Dima’s new X-ray generator (341a) – Pulsed laser source (342)
Equipment in IGR labs Optical Surface Profiler – Wyko NT1100 Optical surface profiler from Veeco is a metrology system using non-contact interferometry to measure surface features TM1000 SEM – Hitachi TM1000 table top SEM, resolution of 30 nm
Alibava system Devices to be tested – LHCb module LHCb module in preparation Some changes to the code?? – SCP devices Thin edge devices prepared at SCIPP as part of an RD50 project. Wish to perform IV and charge collection studies to understand their behaviour. Possible to irradiated these in B’ham and study post irradiation. Supports D.L. T.B. (see next slide) – Irradiated SCT Set of detectors irradiated in the PS. Desire to understand charge collection, noise and reverse current as a function of bias voltage and annealing – 3D Irradiated 3D tested in the past. Wish to perform some annealing studies to complement the TCT work of Graeme.
D.L. T.B. Proposed date is week of Dec 5 th Days Wednesday to Friday – Follows on from CNM 3 days T.B. particulars – Micro-focused beam to scan over pixel/strips/15keV as before – Will concentrated on edgeless devices. – Use Alibava for strip devices. More SCP devices from SCIPP – Characterize here first CTR from Andy Blue? – Option on Medipix devices from Lars (Paula Collins for LHCb)
Your consent to our cookies if you continue to use this website.