Presentation on theme: "The LOGIQ 200 PRO Series. LOGIQ 200 PRO Series The PRO Series represents outstanding value for the most discerning professional, delivering increased."— Presentation transcript:
LOGIQ 200 PRO Series The PRO Series represents outstanding value for the most discerning professional, delivering increased productivity and superior diagnostic outcomes for you and your patients. Progress Professional Productivity Investment Protection Image Quality
SAP IMAGE SOFTENER FRAME AVERAGE B/M FRONT END CONTROL PEAK HOLD ALM ITP XY MEMORY CRDTF ZOOMER XY ADDR GEN NON-INT CONVERT CINE CONTROL CINE MEMORY FIFO XY MEMORY DSP PROGRAM MEMORY USC BUS I/F IMAGE STORAGE RAM IMAGE DISPLAY CONTROL VIDEO LUT Video DAC INTER LACE CONVERT VID DAC VIDEO DECODER SYNC GENERATOR NOVA BUS USC BUS MVP Board
Follow these steps to enter the Service Menu. Note Probes should be installed in the port and Blue Shift key should be off before take these steps. 1. Pressing Shift + Ctrl keys and then press the Shift +s keys, and then Shift + 1 keys. 2. Input the PASSWORD and press Return key. The Service Top Menu will appear on the monitor as shown in ILLUSTRATION 2--5. Service Utility MENU : Top Menu 99/03/12 09:16:37 Current Software Version is 3.0 *System Diagnosis Board/Program Version System Reset Key Operation History Option Set Initialize :1 (1:America 2:Europe 3:Asia 4:Japan) System Clock Adjust Exit
Follow these steps to exit the Service Menu. 1. Press Shift + R keys. If this step will be performed again, the Service Menu will be entered again. OR 2. Select Exit on the Top Menu, and press Set or Return keys. The Service Menu will be exited. Follow these steps to operate the Service Menu. 1. Using Arrow Up/down keys, select one of seven items. 2. Press Set or Return keys. The Service Sub Menu will be appeared or Service Menu will be operated. Note Resetting the system using the System Reset, to reboot System, does not affect on the system presets.
Follow these steps to enter the System Diagnosis menu. 1. Using the Arrow up/down keys, select the “System Diagnosis”menu in the Top Menu. Refer to the ILLUSTRATION 2--5. The left side of selected menu, here will be appeared the cursor (*). 2. Press Set or Return keys. The System Diagnosis menu will appear on the monitor as shown in the ILLUSTRATION 2--6. Service Utility MENU : System Diagnosis 99/03/12 09:16:37 Current Software Version is 3.0 NAME Time Status *System test 21 M Scan Test 0 M TBF Test 0 M Linear/Convex Path 0 M Sector Probe Path 0 M BPHV test 1 M MVP Hardware Test 1 M B mode Function 1 M B mode Cine 8 M M mode Function 2 M MSTE test 4 M Keyboard 0 M PIOP 1 M Monitor 0 M Power Supply 1 M Exit Press ’ctrl’+’X’to