Download presentation

Presentation is loading. Please wait.

Published byAdriana Brighton Modified over 3 years ago

2
How to use the Init << 1/12/2012 by Daniel R. Barnes WARNING: This presentation may contain graphical items and other intellectual content that was lifted from the world wide web without the permission of the owners. Do not copy or distribute this presentation. Its very existence may be illegal.

3
SWBAT...... zero, adjust, and read the triple beam balance.

4
triple beam balanceThemeasuresmass.

5
Put the balance on alevelsurface. Slide all the masses to If the two white lines don’t touch, Rotate the screw under the pan until the white lines do line up. zero.

6
Once the scale is properly “zeroed”, put the object to be massed on the pan. (in this case, a delightful little hamster.) Okay. We’re ready to start moving the sliders, so let’s zoom in on them

7
Once the big mass is on the correct notch, don’t ever move it again. If the pan goes up, you need to move the slider backward one notch and leave it there. Move the masses one at a time, starting with the biggest one.

8
Repeat the procedure with the medium mass. If putting the medium mass on 70 makes the pan go up...... slide it back to 60 and leave it there.

9
Notice that the large and medium masses have notches on their rails.

10
This reminds us that we should never leave the large mass or the medium mass between numbers. We must “click” the large and medium masses right onto the numbers.

11
Finally, slide the little mass on the front rail until the two white lines match up. Because there are no notches on the front rail, you can slide it to the exact position you want.

12
Usually, the little pointer on the small slider won’t point exactly to a line. For instance, the slider here is about halfway between 1.5 and 1.6. In such a case, you are allowed to estimate a hundredths digit. Since it’s exactly half-way this time, you could call this one... 1.55

13
This time, the little slider reads... 4.71 or so. Can you see how the pointer is just a little bit past the 4.7? Maybe you think it’s closer to 4.72 than it is to 4.71. This is where the measuring process loses some of its precision.

14
This time, the little slider reads about... 3.39. Can you see how the pointer is almost to the 3.4 but not quite?

15
This time, the little slider reads about... 8.24. This time, the pointer is about halfway between the 8.2 and the 8.3 marks, but it’s just a bit closer to the 8.2.

16
And now... some scale-reading practice.

17
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 521.2 grams

18
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 105.0 grams

19
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 48.6 grams

20
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 422.6 grams

21
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 114.0 grams

22
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 201.2 grams

23
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 8.9 grams

24
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 253.9 grams

25
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 418.1 grams

26
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 332.8 grams

27
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 424.1 grams

28
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 12.8 grams

29
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 413.0 grams

30
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 332.7 grams

31
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 57.1 grams

32
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 345.7 grams

33
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 342.0 grams

34
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 359.2 grams

35
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 534.8 grams

36
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 5.0 grams

37
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 28.1 grams

38
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 112.7 grams

39
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 549.8 grams

40
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 239.6 grams

41
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 431.6 grams

42
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 104.8 grams

43
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 540.1 grams

44
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 354.5 grams

45
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 242.4 grams

46
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 320.4 grams

47
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 525.7 grams

48
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 251.4 grams

49
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 327.2 grams

50
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 32.6 grams

51
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 537.4 grams

52
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 319.2 grams

53
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 309.3 grams

54
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 524.3 grams

55
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 28.7 grams

56
Triple Beam Balance Demonstrator by Daniel R. Barnes, init 9/18/2006 Ok. I get it. That’s enough practice reading the numbers. 115.8 grams

57
If there’s still time, either you or your partner should get a triple beam balance. HANDS–ON PRACTICE Once you’ve gotten it, partner A should try to measure the mass of a pencil or a pen. Now, partner B should measure the mass of a piece of paper. Partner A should now measure the mass of his/her house keys. Partner B should now measure the mass of his/her student ID card.

Similar presentations

OK

1 Determining Mass Mass is a direct measurement of the amount of matter in a sample.

1 Determining Mass Mass is a direct measurement of the amount of matter in a sample.

© 2018 SlidePlayer.com Inc.

All rights reserved.

Ads by Google

Ppt on emotional intelligence in leadership Ppt on immunization schedule in india Ppt on inhabiting other planets in the solar Ppt on life processes for class 10 cbse Ppt on pathogenesis of preeclampsia Ppt on regional trade agreements example Ppt on semi solid casting process Ppt on power distribution grid Ppt on accounting standard 17 Ppt on solar based traffic light control system