Presentation is loading. Please wait.

Presentation is loading. Please wait.

HangZhou JLS Flame Retardants Chemical Co.,Ltd. Professional Flame Retardants.

Similar presentations

Presentation on theme: "HangZhou JLS Flame Retardants Chemical Co.,Ltd. Professional Flame Retardants."— Presentation transcript:

1 HangZhou JLS Flame Retardants Chemical Co.,Ltd. Professional Flame Retardants

2 Introduction HangZhou JLS Flame Retardants Chemical Co.,Ltd. is a special corporation for exploring and manufacturing non-halogenated flame retardants. We have explored a series of products to meet halogen free requirement. We are world leader in range of ammonium polyphosphate, non- halogenated flame retardants in polyolefine and melamine derivates. Our tenet : QUALITY, INNOVATION, SERVICE

3 Advantages of JLS  Lower smoke,no halogen, environment friendly  Varied series of products,broad Application  Excellent water-proof,aging stability and low migration  Excellent process property  More attractive price/performance

4 JLS Products Catalogue JLS-MC Series JLS-MC Series — Melamine Cyanurate Flame Retardant JLS-PNA JLS-PNA — Non-Halogen Flame Retardant for Polyamide

5 JLS-MC JLS-MC25 JLS-MC15 JLS-MC810 JLS-MC series Melamine Cyanurate JLS-MC50

6 JLS-MC :Melamine Cyanurate CAS No: EINECS: MCA content Excess melamine Excess Cyanurate D 50 D 98 Treating method JLS-MC15≥99.5 %≤0.3 %≤0.2 %≈3μm15 μmNo JLS-MC25≥99.5 %≤0.3 %≤0.2 %≈4μm25 μmNo JLS-MC50≥99.5 %≤0.3 %≤0.2 %≈5μm50 μmNo JLS-MC810≥98.5 %≤0.3 %≤0.2 %≈4μm25 μm surface coating JLS-MC Character

7 JLS-MC series Advantages ◆ Higher bulk density to reduce floating dust and increase mix uniformity. ◆ Excellent particle distributing to ensure Nylon with JLS-MC better mechanism and a smoother surface. ◆ Well mixing with Nylon resin,so is easier to disperse during processing. ◆ JLS-MC810 has even higher disperse property,which ensure Nylon a better mechanical property. ◆ JLS-MC15, MC25 and MC50 is different diameter, which can suitable for different need. ◆ The Nylon which contain JLS-MC is better than Br/Sb system in electricity isolation capability , it can be used widely in low piezoelectricity applications.


9 JLS-MC laser diameter distribution Contrast VolumeJLS-MC DSM- MC Ordinary MCA % Particle Diameter , µ m D D D D D Average diameter

10 JLS-MC series laser diameter Contrast Volume JLS- MC15 JLS- MC25 JLS- MC50 D D D D D D Average diameter

11 JLS-MC and Melapur MC laser diameter Contrast

12 JLS-MC15 and Melapur MC15 laser diameter Contrast VolumeJLS-MC15 Melapur MC15 D D D D D D Average diameter

13 JLS-MC series Applications JLS-MC series consists of JLS-MC15, MC25, MC50 and JLS- MC810 based on JLS-MC, which is mostly used in Nylon. The series can also be used in a range of polyesters. PC,thermoplastic polyurethane Thermosets including epoxy resins, unsaturated polyesters and polyurethane foams.

14 JLS-MC FR Mechanisms contrast FR - mechanism Melamine- derivatives Halogen / Sb 2 O 3 ATH/Mg(OH) 2 Inert Gases√√√ Heat sink√√√ Char formation√√√ Intumescence√ Heat Insulation√ Heat transfer(dripping)√

15 JLS-MC FR Mechanism in PA Advantages l Salt Degradation: T > 300 o C l Heat Sink: Endothermic decomposition to M and CA l Inert Gas Source: (M): Dilution of oxygen and fuel gases l Non-burning dripping (CA): Decrease of exposure to flame

16 JLS-MC for Nylon l PA6, 66 un-reinforced: UL 94 V-0 at 6~12 wt%, PA6 need more addition than PA66 l PA6, 66 mineral filled: UL 94 V-0 at 13~15 wt.% l PA6, 66 glass fiber reinforced: 10~15% glass fiber, 15% MC Properties: UL 94 V-2, Glow wire 960 o C, CTI > 500 Volt

17 JLS-MC Properties in Nylon66 ItemUnits Bromine Antimony JLS-MC Ordinary MCA Tensile StrengthMPa Elongation at break% Flexural StrengthMPa Flexural ModulusGPa Charpy Impact-NotchedKJ/m Flame test (0.8mm)UL94V0 V2 Smoke Density firing No-firing39080 CTIV350>550

18 JLS-MC used in Nylon contain of Glass fiber Contain: 10% glass fiber, 10%~15%JLS-MC ItemUnit Flame resistance PA6PA6 basis Standard Fire test0.8mm UL 94 V-2 no UL Izod impact strengthJ/m ISO Flexural StrengthMpa ASTM D Flexural ModulusMpa Tensile StrengthMpa ASTM D Elongation at break% 33.8~

19 JLS-MC processing instructions in Nylon Item NOZZLE Temp, ℃ PA PA Vacuum ≥-0.08Mpa ( recommend )

20 JLS-PNA JLS-PNA is a non-halogenated and phosphorus/nitrogen flame retardant. It may be used in Nylon modified glass fiber. It is melamine polyphosphate.

21 JLS-PNA SPECIFICATIONS Phosphorus % ( m/m ) Thermal decomposition ℃ ≥350 Water content% ≤0.5 Average particle size µm ≤25 JLS-PNA: Melamine Polyphosphate CAS No:

22 ◆ Non-halogenated, lower smoke density and toxic ◆ Good processing capability , no need especial screw combination and especial specs glass fiber ◆ Excellent thermal stability, thermal decomposition≥350 ℃, very suitable for modified glass fiber Nylon ◆ White color , easy to make all kinds of colors ◆ Excellent electricity capability , CTI>450V , very suitable for E&E applications,no recycle problem JLS-PNA Advantages

23 Mostly used in glass fiber modified PA66 and PA6, which is suitable for processing of sorts,for example extrusion and injection moulding. The compound consisted of JLS-PNA, glass fiber and Nylon provided with excellent flame resistance and mechanical performance JLS -PNA APPLICATIONS

24 JLS-PNA Laser Diameter Volume , % Particle Diameter , µm D D D D D Average diameter 4.470

25 JLS-PNA Application in PA66 Item Additive percent ( %wt ) PA66 ( A3K ) Glassing fiber 25 JLS-PNA20-25 fire test ( UL 94 ) UL94 : V-0 Mechanical properties Tensile strength , Mpa 95.7 Flexural Strength , Mpa Flexural Modulus , Mpa 8400 Notched impact strength , J/m 45.0 Charpy impact Strength,no notched , KJ/m Heat transition ,℃( 0.45Mpa ) 220 Hardness, Rockwell 120

26 PNA processing instructions in Nylon66 modified glass fiber Item Nozzle Temp ℃ Vacuum <-0.06Mpa ( recommend ) Screw speed rpm is suitable

27 Thanks for attention

Download ppt "HangZhou JLS Flame Retardants Chemical Co.,Ltd. Professional Flame Retardants."

Similar presentations

Ads by Google