We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byJohanna How
Modified about 1 year ago
Making a trap cage
You need plastic bottles, wire, string, a plastic bag and tools.
Cut a disc from the bottom of one of the bottles.
Trim the edges of the disc to make it neat.
It should look like this.
Now cut the bottle about 10 cm from the top.
Make a number of vertical cuts, 1 cm long and 1-2 cm apart.
Fold the resulting flaps out.
You should now have a plastic funnel like this.
Cut the second bottle about 10 cm from the base…
...to form a cup like this.
Trim the remaining top half of the bottle…
..fit the two pieces together to form a short bottle..
You need to make holes in the plastic. To do this easily…
Heat a metal tube...
...and make a hole in the plastic disc you made earlier.
You will create a hole like this. Remove any flashing and..
fix the disc on the end of the short bottle you made earlier.
Then make a hole in the side of the bottle and...
...and attach the funnel which you made earlier.
The funnel and bottle should fit snugly but be detachable....
You need a metal or wire ring like this.
Attach the ring to the netting funnel inside the Epsilon.
Attach a length of soft wire to the plastic funnel.
Secure it tightly around the apex of the funnel.
It should now look like this.
The cage will eventually be like this, but first…
..pass the funnel through the metal ring..
The funnel should fit snugly against the ring like this.
The flexible plastic tabs should be flush against the netting.
Attach the wire to the supporting bar of the Epsilon trap.
The cage should now be self-supporting like this.
Now attach the plastic bag to the plastic cage.
When completed, the cage should look like this.
You will create a hole like this. Remove any flashing and..
Covering Your Textbook. Procure full size paper bag from Kroger, Food Lion, Martin’s, etc.
1. Open up a brown paper bag.. 2. Cut of the bottom of the bag.
Making A Paper Bag Cover Cut open a brown paper shopping bag, the kind you get at the grocery store. Start by cutting down one corner, from top to bottom,
How to Make a PAPER TIGER. STEP 1: MAKE BODY TUBE 1. Use a spent engine to roll your body tube out of copier paper the short way 2. Test the size by sticking.
Book Covering Instructions. First thing first, take “ownership” of the textbook issued to you by doing the following…. 1)Using pen, neatly write your.
Installing a single Dreamscreen Set unit in place and attach with 2 ½ “ screw. Do not tighten the screw yet, tighten just enough to keep from falling.
Design and test a parachute What you'll need: –A plastic bag or light material –Scissors –String –A small object to act as the weight, a little action.
CAN CHALLENGE- HOW WE MADE THE CAN AND MATERIALS WE USED Tess Mandoli and Kate Hanson.
Foldable Tie Book Instructions. Materials Needed 2 pieces of scrap paper Glue stick Paper Hole Punch Tool 1 piece of yarn cut to one arm’s length.
The first step is to measure the depth of your box.
How to make a teddy parachute back-pack. Number 3 in the series by Arthur Dibble (and the Ted Berets) November 2007 In conjunction with the web site
Build A Motor You must follow the directions step-by-step!
How to Build a Water Bottle Rocket Science Fall 2006.
Oneone IN-4 Objective: To construct a catapult or series of catapults in order to test an experimental variable. Core Question: How is the experimental.
Solar Bake Off. PROCEDURE 1.1 st person traces a flap in the top of the box. Use the ruler and marker to measure a 1½” border around the lid, on the.
HOW TO MAKE AN Spring 2012 Origami Balloon By: SondraVojvodich.
How to Build a Water Bottle Rocket Science 8 th Grade.
How to construct a handbag Some things you’ll need to make a bag.
How to construct the draw string bag Some things you’ll need to make a bag.
L.C. Technology ROBOT ASSEMBLY. Base Assembly BASE File off raised tabs on each side of Servo. Place Servo in vice between Fibre Clamps. Raised Tabs Repeat.
Contributed by: Integrated Teaching and Learning Program, College of Engineering, University of Colorado at Boulder.
Pneumatic Arm Assembly Instructions. Contents of Pneumatic Arm Kit Wooden pieces (⅜” cross-section): 1 X 24”; 1 X 21⅛”; 4 X 7”; 2 X 4⅞”(each cut into.
OR-PR 156 Task 7 Fabricate a Varus/Valgus Control Strap For an AFO.
Your group has to design and build a boat that will be powered a distance of 12ft. Each boat is released at the same time, to race the 12ft distance.
REMOVE ALL CUT OUTS MILK CARTON TRAP ASSEMBLY. STAPLE BOTTOM OF TRAP.
Manufacturing Assembly Plan P Mechanical Spine Test Platform.
How to Make a Hot Air Balloon. Choosing a design Your group must design a color scheme. You can have stripes, patchwork, or whatever you choose.
INSTALLATION INSTRUCTIONS FOR GERARD METAL SHINGLES.
How To Catch A Swarm Using Buckets. Take 2 plastic buckets and cut a large matching hole in the bottom of each. Using screen wire, preferably 1/8 hardware.
Which shape column is the strongest? LKS2 Topic: The Romans in Britain Block H: Roman Buildings and Engineering Session 2 © Original resource copyright.
Ms. Lacross Ag II FLORAL DESIGN TOOLS. PRUNING SHEARS - Used to cut woody stems (bushes / tree limbs) - Sharp blade is a must.
Welcome to the Fabulous World of ORIGAMI Japanese print from the collection of the Metropolitan Museum of Art.
Collect 4 sheets of paper and layer them about 1.5 cm apart vertically. Keep the edges level. Fold up the bottom edges of the paper to form 8 equal tabs.
School Name Date Volunteer Name Electric Generator SEEDKIT Workshop.
Mars Reconnaissance Orbiter1:48 scale READ ALL THE INSTRUCTIONS AND INSPECT THE PARTS SHEETS FIRST. Score fold lines and cut out the parts. High Gain Antenna.
Hydraulic Digger Step-by-step assembly instructions (c) 2013 Mechanical Kits Ltd.1.
IPAD BEAN BAG STAND. INSTRUCTIONS TO SEW YOUR VERY OWN HANDY IPAD BEAN BAG STAND. This simple iPad Bean Bag Stand is sewn using your favourite medium.
D.T. unit 5C: Moving Toys How to make a moving toy.
Respiratory Surfaces Making a Model of the Lungs.
Slab constructed cup Flatten a lump of clay into a long shape as you will be rolling out a slab long enough to wrap around a tube form. Note: finished.
Health Talent 21 Project By Andre Freire. I would use two 2 litter bottles to make a tornado in a bottle To make the Tornado in a bottle you would.
How to make a UV Safe Hat By Sarah Madden 2012 Medical Conference November 8-12, Sacramento, CA.
Rocket Project: Newton’s 3 Laws in 3D!.
Traditional Fixtures & Fittings 1 J. Byrne Fixtures & Fittings J. Byrne
Air Powered Rocket. Rocket Body Lay two pieces of paper with their long sides over lapping Tape the paper together Roll the paper into a tube using the.
Expand Media Wall & Podium Case Training Video’s & Instructions.
Make a Gas Cylinder Cooker. © G. Norris 2011 Copyright This document and the information contained within is copyright to © G. Norris Reproduction.
Fasteners Spring 2008 Way. What are Fasteners? Items used to close openings in garments Items used to close openings in garments Openings may meet or.
© 2017 SlidePlayer.com Inc. All rights reserved.