We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byAdolfo Binkley
Modified about 1 year ago
© 2003 Swagelok Company Third-Party Product Inspection Saving Time and Money by Shifting Inspection to the Supplier
© 2004 Swagelok Company Third-Party Product Inspection Full quality responsibility can be transferred to the supplier Ensures consistent quality Streamlines validation Reduces time to market Why Swagelok TPI products? Save time and money! On-site inspection failures add costs and delays Quality impacts installation Validation is challenging Time to market is critical
© 2004 Swagelok Company Third-Party Product Inspection Swagelok biopharm fittings are: Inspected and certified to meet ASME-BPE standards by an independent, third-party inspection service Inspection documentation verifies: Visual inspection Dimensional inspection Identification markings Material chemical composition
© 2004 Swagelok Company Third-Party Product Inspection Visual Inspection
© 2004 Swagelok Company Third-Party Product Inspection Surface Finish Measurement
© 2004 Swagelok Company Third-Party Product Inspection Dimensional Inspection
© 2004 Swagelok Company Third-Party Product Inspection All inspected fittings are permanently marked with lot numbers which corresponds to inspection documentation
© 2004 Swagelok Company Third-Party Product Inspection Documentation Inspection Procedure
© 2004 Swagelok Company Third-Party Product Inspection Documentation Inspection Results Material Test Report
© 2004 Swagelok Company Third-Party Product Inspection Individually zip bagged for shipment with material certification/Third-party inspection documentation Color coded caps differentiate between electropolished and mechanically polished products Duplicate records are available from SBSC Documentation
© 2004 Swagelok Company Third-Party Product Inspection Certifications on-line
© 2004 Swagelok Company Third-Party Product Inspection Third-party inspection: Pushes QA/QC cost to the manufacturer Reduces internal resources required for QA/QC Provides exceptional documentation and traceability Eliminates delays and added cost from failure at inspection Whole lot inspections Return costs Reorder time and procurement costs Administrative costs Benefits
© 2004 Swagelok Company Third Party Inspection Example
© 2004 Swagelok Company Third-Party Product Inspection Third-party inspected products result in: 100% usable product Surface finish meets ASME BPE requirements Weld ends are suitable for orbital welding Wall thickness is in accordance with specifications Complete documentation Which can mean for you: Faster installation and validation for shorter time to production Reliable processes at startup Complete document trail for product compliance Lower installation and system costs Summary
© 2004 Swagelok Company
Seafood HACCP Alliance for Training and Education Chapter 10 Principle 6: Establish Verification Procedures.
1 SUBSAFE Approved for Public Release. SUBSAFE2 Lives Lost Aboard the U.S.S. Thresher Approved for Public Release.
Third Party Certification & The Q-Mark Scheme. What is third party certification? Independent process of certifying that a manufacturer continues to comply.
Technology Services – National Institute of Standards and Technology Conformity Assessment ANSI-HSSP Workshop Emergency Communications December 2, 2004.
Supplier SQM Participation. 2 | MDT Confidential What is SQM? Stands for Supplier Quality Managment –Formally referred to as SPACE and SPICE Is a system.
ISO 9000 Certification ISO 9001 and ISO ISO 9000 There are 5 Standards in the basic ISO 9000 series: conformance models or guides. A conformance.
Validation | Slide 1 of 27 August 2006 Validation Supplementary Training Modules on Good Manufacturing Practice WHO Technical Report Series, No. 937, 2006.
Introduction to SQF Certification (Use “Notes “ View in PowerPoint to see additional guidance)
October SYS 1 Quality Audit and ISO9000 Quality Standard Kinnison, Chapter 17.
Module 15 | Slide 1 of Active Pharmaceutical Ingredients Part 3 WHO TRS 957, 2010, Annex 2 Active Pharmaceutical Ingredients.
Documentation Traceability and documentation is required.
Certification Approaches EAC Meeting Miami, FL August 2008 Gordon Gillerman Conformity Assessment Advisor Homeland Security National Institute of Standards.
S. Barbanotti - DESY Requirements Conformance for SRF Cryomodules Workshop 16/10/2014 – ESS, Lund XFEL cryostat main components: Quality Assurance and.
DISPLAY FIREWORKS SEMINAR PARIS LAS VEGAS HOTEL February 21,
Managing Your Supply Chain for Food Safety in a Global Environment Dane Bernard Keystone Foods.
AIQ Analytical Instrument Qualification. AIQ – Analytical Instrument Qualification Varian, Inc.’s Analytical Instrument Qualification documentation has.
Setting up an Internal Audit Program By
This class cannot be shared or copied without the written permission of PracticeWorks Systems, LLC.
Conformity Assessment Overview Nuclear Energy Standards Coordinating Collaborative November 2009 Gordon Gillerman Chief Standards Services Division National.
LCLS-II Prototype Vacuum Vessel (VV) and Helium Gas Return Pipe (HGRP) FDR Planned Quality Control Effort (QC) Ken Premo 12/04/14.
1 First Article Inspection Report “FAI” 2 First Article Inspection The Marvin Group Requirements Industry AS9102 Rev A - Aerospace First Article Inspection.
Updated 4/6/2011 First Article Inspection Per AS9102 Training ISR Systems.
Creating Lasting Change for Your Business ISO 9001:2000 Management System Overview.
MASTER FORM # 13 - AMB General 1 Presentation of Services AMB ® WARRANTY, INC. NATIONAL THIRD PARTY WRTY. PROVIDERS & INSPECTION SERVICES FOR PRE-ENGINEERED.
CHAPTER 2 TYPES OF BUSINESS INFORMATION SYSTEM. INTRODUCTION Information System support business operations by processing data related to business operation.
MODULE B - PROCESS B1.ASME Organizational Structure B2.Standards Development: Staff and Volunteer Roles and Responsibilities B3.Conformity Assessment:
PPAP Requirements Training Rev. A 08/08/14. What is PPAP? Production Part Approval Process (PPAP) The purpose of PPAP is to determine if all customer.
Aviation Maintenance Management Quality Assurance Chapter 17.
YOU ALWAYS GET WHAT YOU ALWAYS GOT. Roles and Responsibilities Arden Delisle Chief Inspector Al-Pac March 24 th 2014.
1 ISO 9000 refers to a group of quality assurance standards established by the International Organization for Standardization.This group, which is made.
The renewables Directive 1.Sets mandatory national targets for renewable energy shares, including 10% biofuels share, in 2020 (Articles 3 and 5) 2.Requires.
2010 UBO/UBU Conference Health Budgets & Financial Policy Briefing: Strategic Plans for UBO Date: 24 March 2010 Time: 0800–0850.
Global Supplier Quality Manual PPAP Requirements.
INTRODUCTION TO AUDITING. Outline Definition of a quality Audit Types of audit Qualifications of quality auditors The audit process.
This teaching material has been made freely available by the KEMRI-Wellcome Trust (Kilifi, Kenya). You can freely download, adapt, and distribute this.
Water | Slide 1 of Water for Pharmaceutical Use Part 3: Operational considerations Supplementary Training Modules on Good Manufacturing Practice.
Best Practices: Where Industry Should Lead on Ensuring Proper Testing & Auditing Stephen F. Sundlof, DVM, PhD Senior Advisor for Animal and Food Safety.
ISO 9001 : Objective Introduce the concept of ISO 9001 Standard Highlight important areas of ISO 9001 Standard Briefly introduce the system requirements.
The MIT/QA Plan Issue W. Reiersen. Terminology 1 Product specification: A document generated by the customer identifying requirements and the inspections.
Crane Operations Objective To ensure that the hazards and risks of Crane Operations are identified and that operations are conducted in such a way as to.
30/02/2008 Dept. of Pharmaceutics 1 Salient Features of Quality Assurance Dr. Basavaraj K. Nanjwade M.Pharm., Ph.D Associate Professor Department of Pharmaceutics.
SPEOS CAA V5 Based Windshield Analysis SPEOS CAA V5 Based Windshield Analysis To quantify and qualify the optical performances of a windshield.
Conformity Assessment Practical Implications InterAgency Committee on Standards Policy June 2007 Gordon Gillerman Conformity Assessment Advisor Homeland.
Configuration Management. Why Is Software Difficult to Build? Lack of control Lack of control Lack of monitoring Lack of monitoring Lack of traceability.
Supplier Quality Improvement August 2012 David T. Hutton Supplier Quality Engineer Cert Package Examples.
Metrology & Accreditation – Their Role in the Global Market Presented at the 2009 NCSLI Conference San Antonio, Texas 30 July 2009 by Roxanne Robinson.
"Welder Certification" The purpose of this presentation is to introduce you to the various aspects of welder certification. This is not intended to cover.
PRESENTED BY: NAMA’S GOVERNMENT AFFAIRS DIVISION ERIC DELL SENIOR VICE PRESIDENT Reduction of Lead in Drinking Water Act NAMA Webinar.
Compliance From The Ground Up September 18, 2013 Earlene Gibbons Director, Operational Technology.
© 2017 SlidePlayer.com Inc. All rights reserved.