We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byEmmanuel Wiswell
Modified about 1 year ago
Presented by: John Cole General Manager, CICB – Definitions – Crane Inspections – Wire Rope Selection and Inspection Criteria – Safety Devices – Operation Aids – Qualifications of Maintenance and Repair Personnel – Equipment Modifications OSHA (800)
Builder Certified Welder Competent Person
Controlling Enti ty Dismantling Equipment criteria
Qualified person Unavailable procedures Wire rope
Repaired Adjusted Equipment Modified Equipment Post-assembly
Each Shift Monthly Annual/comprehensive
Equipment not in regular use Manufacturer’s procedures Documentation
Shift Inspection Who conducts the inspection What is inspected
Monthly Wire Rope Inspections Annual Wire Rope Inspections
Wire Rope Design Criteria Wire Rope used in Boom Hoists
Rotation Resistant Rope Design Criteria Diameter for Hoist Sheaves Criteria for Dead Ending Wire Rope
Crane Level Indicator Boom Stops Jib Stops
Horns Foot Pedals Outrigger Jacks and Stabilizers
Boom & Luffing Jib Limiting Devices Anti-two Blocking Device Boom Angle or Radius Indicator
Jib Angle Indicator Load Weighing and Similar Devices Outrigger / Stabilizer position sensor/monitor
Requirements for Maintenance and Repair Personnel Must Meet the requirements of a qualified person when operating a crane in the performance of their tasks
Modifications that affect the capacity of safe operations Procedure to follow
Procedures to follow in the event of manufacture's refusal Procedures to follow in the event procedures are unavailable Military modifications
“Understanding the Importance of Proper Equipment Inspections” Jeffrey Hammons VP Risk Management AmQuip Crane Rental LLC.
Safety : Cranes Introduction to Industrial Technology Spring 2014 Mr. Shubert 1.
Hydraulic Crane Safety. Hydraulic Cranes Can be stationary or attached to trucks, trains and boats Can be stationary or attached to trucks, trains and.
Copyright © Crane Safety, Subpart N.
OSHA Cranes & Derrick Review Subpart CC John Frowd Compliance Assistance Specialist United States Dept. of Labor-OSHA Manhattan Area Office (212)
OSHA Office of Training & Education1 Cranes. 2 Major Causes of Crane Accidents Contact with power lines Overturns Falls Mechanical failures.
OSHAX.org - The Unofficial Guide To the OSHA1 Cranes.
Tower Crane Safety Regulations Chuck Lemon Division of Occupational Safety & Health.
1 Cranes Safety M. Zaman Bhatti Manager HSE, National Refinery Limited.
1 Florida Marine Contractors Association CRANE AND RIGGING TRAINNG AND CERTIFICATION REQUIREMENTS BY OSHA AND ANSI/ASME STANDARDS Shawn Khan October 16,
Cranes and Slings Major Causes of Crane Accidents Contact with power lines Overturns Falls Mechanical failures 1.
1 Cranes Module 13. 2Objectives After this module you should be able to – identify the most common crane hazards – take the necessary steps to avoid those.
Moments of Inertia Polar moment of inertia – Used when calculating the torsion – Indication of resistance to torsion – Solid Shaft – J = π R 4 / 2 Area.
Crane Operations Objective To ensure that the hazards and risks of Crane Operations are identified and that operations are conducted in such a way as to.
L.P.R. Construction Crane Safety Standards Changes to OSHA’s subpart N As proposed by OSHA’s Crane and Derrick advisory committee.
Accidents Case Studies Collapse of crane Crane Operator had hoisted up a bag of sand (780 kg) over the roof. While doing so, the Overload Radius Indicator.
Safe Operations of Cranes, Hoists and Truck Hoists.
1293 Airport Road Beaver, WV Phone: (304) Fax: (304) Crane Safety Vincent J. Giblin, General President.
Risk Engineering The proposed OSHA crane standard Zurich Services Corporation.
Presenter Name Presenter Title Event Name Presentation Title October 1, 2010 OSHA Cranes & Derricks Subpart CC.
MNM Fatal Machinery Accident Machinery Accident February 19, 2009 (Puerto Rico) February 19, 2009 (Puerto Rico) Crushed Stone Operation Crushed.
Regulations & Procedures : … …………………......……………... ILO 32 ………………….…..……………………………. ILO ………………………………... TNS.
5. Set up the crane 4. Plan the lift 3. Check the crane 2. Communicate clearly 1. Prepare for hazards QUIT EASY GUIDES AUSTRALIA PTY LTD
Powered Platform Safety. © Business & Legal Reports, Inc Session Objectives You will be able to: Identify powered platform components Recognize.
Subpart CC Qualified person means a person who, by possession of a recognized degree, certificate, or professional standing, or who by extensive.
Cranes, Derricks, Hoists, Elevators, & Conveyors for Construction.
Copyright © 2012 American Safety Management Inc. Crane and Hoist Safety.
CRANE OPERATIONS SAFETY. Crane usage varies In our facility we use cranes to move materials in the shop and in the yard. However, whether or not it is.
Prepared by: Ian Humphrey, P. Eng. Paul Henderson, P. Eng.
OSHA 29 CFR Part 1926 Cranes & Derricks In Construction Session Outline Signals – General Signals – Radio, etc Signals –
Overhead Crane General Use & Inspection Criteria The Selection Process For Both Overhead Cranes & Underhung Hoists, Should Not Be Taken Lightly. A Significant.
§ – Subpart L Oklahoma State University2.
Working Around/Under Loads. INTRODUCTION Whether its a load under a mobile crane, an overhead hoist in the shop or a culvert or trench box under a loader.
Lifting Operations & Lifting Equipment. LOLER 98 Lifting Equipment must be of adequate strength & stability, as must the load itself Lifting equipment.
Construction Safety Council. by David G. Allie Subpart R - Steel Erection ( ) Tiered buildings not adaptable to temporary floors - Safety.
Crane Fundamentals Lifting Safety BY - ALEX MATHEW HSE ENGINEER LAHOUD ENGINEERING CO.
Cranes and Lifting Safety Four Corners Safety Network Presentation.
Rigging Requirements Part L “Cranes” and Part F-1 “NOT CRANES” Construction Safety Standard WAC Brad Solheim Department of Labor & Industries Crane.
CFR SUBPART L SCAFFOLDS CFR SUBPART L SCAFFOLDS.
Office of Training & Education1 § SUBPART L SCAFFOLDS.
2.5.5 Student Book © 2004 Propane Education & Research CouncilPage Coordinating Loading and Unloading of ASME Tanks Using Contractor- Operated.
SETTING UP OF MOBILE CRANES A Training Slideshow..
Eng. Malek Abuwarda Lecture 5 P1P1 Construction Methods Lecture 5 Excavating and Lifting.
MNM Fatal Machinery Machinery November 18, 2005 (Tennessee) November 18, 2005 (Tennessee) Crushed Stone Operation Crushed Stone Operation Plant.
FHM TRAINING TOOLS This training presentation is part of FHM’s commitment to creating and keeping safe workplaces. Be sure to check out all the training.
Washington State’s New Construction Crane Rule (Phase 1)
Crane Questions Jim Shelton, HNAO CAS These are not necessarily official OSHA opinions but guidance until official interpretations may or may not be.
This presentation is for illustrative and general educational purposes only and is not intended to substitute for the official MSHA Investigation Report.
© 2017 SlidePlayer.com Inc. All rights reserved.